Reviews Copper Based Alloys

TRIM Cutting & Grinding Fluids C270/5 High Performance Synthetic Coolant 5 gal Pail

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites.
  • Provides excellent corrosion inhibition on all common ferrous alloys.
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur based EP additives.
  • Extremely low carry off for very low total operation costs.
Check Stock

TRIM Cutting & Grinding Fluids C270BD/1 High Performance Synthetic Coolant, Blue Dye, 1 gal Jug

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels and copper alloys as well as plastics and composites.
  • Provides excellent corrosion inhibition on all common ferrous alloys.
  • Does a great job in form grinding, drilling, tapping and reaming operations without chlorine or sulfur based EP additives.
  • Extremely low carry off for very low total operation costs.
Check Stock

TRIM Cutting & Grinding Fluids C270CGBD/5 High Performance Synthetic Coolant, Blue Dye, 5 gal Pail

  • C270CG bd is compatible with a very wide range of materials including cast iron, steels, and copper alloys, as well as plastics and composites.
  • Provides excellent corrosion inhibition on all common ferrous alloys.
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives.
  • Extremely low carry off for very low total operation costs.
Check Stock

Hardness Testing File Set

  • 【Accurately measured value】-----Precision measurement circuit to ensure Indication error ± 0.5% (HLD = 800), showing the value of repeatability 0.8%.
  • 【Leeb hardness measurement】-----Based Leeb hardness measuring principle, can detect a variety of metal materials.
  • 【Supports a variety of standard hardness】-----Real-time display and conversion: Brinell HB, Rockwell HRC, Vickers HV, Shaw HS, and three kinds of intensity values.
  • 【Applicable Materials】-----Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper(bronze).
  • 【Application】-----1)Bearings and other parts.
  • 2)Failure analysis of pressure vessel, steam turbine generator group and equipment.
  • 4)Mechanical or permanent assembly installed.
  • 6)The original record of formal requirements on test results.
Check Stock

TIG Welding Tungsten Electrodes 2% Lanthanated Blue WL20 10-Pack 1/16

  • PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.
Check Stock

2.2 Lbs Delft Clay Replacement Casting Sand Gold Silver Pewter Jewelry Casting

  • The Delft Clay is a highly-refined casting sand.
  • Provides sharp, high-detailed castings in gold, silver, pewter, copper-based alloys, and more.
Check Stock

4.4 Lbs Delft Clay Replacement Casting Sand Gold Silver Pewter Jewelry Casting

  • The Delft Clay is a highly-refined casting sand.
  • Provides sharp, high-detailed castings in gold, silver, pewter, copper-based alloys, and more.
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

TRIM Cutting & Grinding Fluids C320/5 High Lubricity Synthetic Coolant, 5 gal Pail

  • Excellent extreme pressure (EP) lubricity to do many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives.
  • A very versatile product which works well in mixed metal situations including aluminum, steel alloy, cast iron, and copper alloy.
  • Provides good corrosion inhibition on all common ferrous and nonferrous alloys.
  • Keeps grinding wheels clean and sharp for higher "G ratios", better surface integrity, and faster stock removal.
  • Contains no DEA, nitrides, phenolic compounds, "formaldehyde releasers", or chlorine.
Check Stock

Bernzomatic PC3 Copper-Phosphorous Brazing/Welding Rods, 3-Piece

  • Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs.
  • Working temp: 1,310-1,475-Degree farenheit.
  • Joins copper to copper without flux, or copper to copper alloys (brass, and bronze).
Check Stock

MARSWARE TIG Welding Tungsten Electrode 10-Pack Rod Rare Earth Blend Tri-Element Non-Radioactive 0.040 ×7 Ground Finish Arc Starts Easier and More Stable Purple EWG

  • 【Premium Quality Tungsten Electrodes】The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
  • 【High temperature-resistant, Non-melting】98% Tungsten, 1.0% Lanthanum, 0.5% Zirconium, and 0.5% Yttrium, non-radioactive. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • 【A Wide Range of Suitable Base Metal Type】Good for stainless steel, copper alloys, carbon steel, nickel titanium, copper alloys, magnesium, aluminum and its alloys, etc..
  • 【Upgraded Vacuum Package】10 pcs 0.04''(1.0mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
  • 【Worry-free Purchase】Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock