Reviews Copper Alloy Wire

Happybuy Manual Wire Stripping Machine 0.06-0.98 inches, Wire Stripper Machine with Hand Crank Portable, Wire Stripping Tool Aluminum Construction,for Scrap Copper Recycling

  • Hand Crank Designed: designed with hand cranks,easy to operate.Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
  • Aluminum Alloy Material: Manual wire stripper with high quality lightweight construction made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety.
  • Recycle Your Copper: Suitable for removing the plastic and rubber insulation from undamaged scrap wire.You can recycle your copper wire, benefit from non-insulated pure copper wire.
  • Easy to Use ,Portable & Energy Saving: There is adjustable blade and rollers on the cable wire stripping machine, smoothly and good for any shapes Cable. When you use this machine to strip the wire whose diameter smaller than 3mm, please put the wire to the small hole on bottom.
  • Wide Application: This machine is automatic and the wire range is up to 25mm，widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.
Check Stock

NEWTRY Hydraulic Cable Cutter Hydraulic Rebar Cutter φ25/32” Steel Wire Cutter 60KN Bolt Cutter for Copper Aluminum Cable, Armoured Cable, ACSR, Wire Rope, Steel Strand Wire, Aluminum Wire

  • ▷[HIGH CARBON ALLOY STEEL BLADE]---The Hydraulic Cable Cutter adopt high carbon alloy steel blade, high strength, and is specially used to cut copper aluminum wire and steel core aluminum stranded wire. Hook-type Knife Head is easy to open and close, and can be placed in any position. The blade can be replaced by opening the knife edge. The ASIN of the replacement blade: B07NMS6FQ5..
  • ▷[180°ROTATABLE HEAD & 360°FLEXIBLE USE]---The head of the industrial wire shear scissor can be rotated 180 degrees to facilitate adjustment of the working angle. It can also be operated in 360°, which is especially suitable for use in unfounded places and high-altitude projects..
  • ▷[ERGONOMICALLY DESIGNED INSULATED HANDLE+SAFETY VALVE SWITCH]---The handle of this hydraulic wire cutting tool uses a ring-shaped rubber handle to increase friction and provide a comfortable grip.Tighten (ON) when pressurizing and turn off (OFF) when releasing pressure, which is more safe and convenient..
  • ▷[SHEAR RAGNE & WIDE RANGE OF APPLICAITONS]---This Hand Crimper Tool can be used to cut copper aluminum cable,armoured cable, ACSR, wire rope, steel strand wire, copper wire,aluminum wire, steel rope,etc. But NOT SUITABLE FOR submarine cable, screw-thread rebar, iron chain or aircraf....
Check Stock

2Pcs 5 inch Small Flush Cutters Wire Snips Clippers Diagonal Cutters, Wire Cutter Soft Copper Wire Snips and Side Cutting Pliers for Electronic, Model, Jewelry Making (blue)

  • Ultra Sharp Wire Cutters: 5 inch cutting pliers, wire cutters are Ultra Sharp and made of special high quality hard alloy material, the jewelry wire cutters is very easy to use, side cutters pliers can snip wires up to 16 AWG..
  • Ergonomic Design for Side Cutters Pliers: The side cutters have a non-slip rubber handle, which is based on ergonomic design can play a protective role and provide a comfortable grip. floral wire cutter is very easy and comfortable to hold..
  • Flush Cut Pliers Ability: Cutting pliers cuts soft copper wire 16AWG mm (1.3 mm), 3D printing filament (1.5mm), iron wire 18AWG (1.0mm), the metal wire snips is easier to cut most hard things..
  • Versatility Wire Stripper Tool: The flush wire cutters, Wire Snips are suitable for cutting soft copper wire, plastic wire, small cable, aluminum wire, soft alloy wire, and this small wire cutters is ideal for jewelry making crafting, Soft materials, Electronics, Plastic, Edge banding, etc..
  • Metal Cutter Tool: Do not use the cutting pliers to cut objects beyond its cutting capacity, like hard metal, otherwise the cutting edge might be broken and cause irrecoverable gaps. please pay more attention that wire cutters are non-insulated, please cut off the power before using..
Check Stock

3PCS DIY Twisted Copper Wire Tool Winding Copper Wire for Jewelry Making, Artifact Handmade Antique Jewelry Accessories Mini Pin Vise Jewelry Making Tool (Tools&Copper)

  • ★ Reliable Workmanship: Top quality, silver appearance, fine texture. The exterior of this tool is made of high-quality alloy, compact and firm, not easy to deform..
  • ★ Double Ended Design: The twisting copper wire tool adopts a double-ended design, and the inner cores are made of copper. Each core has two ends, a total of four ends, the replacement & accessories of the core can clamp the copper wire or small tools within the range of 0.3-3.2mm..
  • ★ Size Information: The size of the copper wire winding tool is approximately 10.5 cm/4.1 inches long. The size of the inner core is about 3.5 cm/1.37 inches long. This tool is small in size and easy to carry and store..
  • ★ Value Packaging: In addition to the two jewelry wire making tools, there is also a roll of 12 meters long 0.3mm thick copper wire in the wire wrapping kit. With these jewelry making tools, you can make many beautiful handicrafts, such as beautiful antique hairpins, bracelets, necklaces and so on..
  • ★ DIY Your Own Jewlery：Use this wire twisting tool to design and handcraft a unique gift as professional for your friends. Bring you a lot of diy jewelry fun and sense of accomplishment..
Check Stock

Automatic Electric Wire Stripping Machine, Scrap Cable Stripper for Scrap Copper Recycling, Compact & Portable Aluminum Alloy Construction, Extra Blade Included, 1.5mm-25mm

  • ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and easily endure years of heavy use..
  • EASY OPERATION & WIDE COMPATIBILITY: The electric motor powers drill-driven technology while the adjustable blades and rollers fit all wire sizes with diameters from 0.06” (1.5mm) up to 0.98” (25mm)..
  • THE CROWN OF COPPER CABLE RECYCLERS: This wire stripping machine removes the plastic and rubber insulation from undamaged scrap wire - a must-have for recycling your copper cable..
  • 1/4 HP SINGLE PHASE INDUCTION MOTOR: Motorized to save you time, effort, and money, it creates a fast stripping speed of 50 feet per minute, plus the hands-free design increases safety and convenience..
  • PERFECTLY PORTABLE: Measured at 9.4” x 12.6” x 12.6” and weighing only 33 lb, this cable stripper is portable and convenient to move around your workstation..
Check Stock

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

  • Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
  • Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
  • Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
  • Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
  • When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
Check Stock

Hsing 100W Concrete Vibrator Vibration Motor with Speed Controller, AC 110V 3600rpm Single Phase Power Concrete Vibrators for Shaker Table (100W + Controller)

  • [ Adjustable Eccentricity Block ] - The eccentric block is easy to adjust, multi-voltage, power optional, Meet all kinds of requirements according to different usage..
  • [ Pure Copper Enameled Wire Stator ] - The stator use high temperature resistant pure copper enameled wire, full copper winding, and adopts special vacuum dip coating process, Class F insulation grade.
  • [ High Quality Import Bearing ] - The bearing is import, Low noise, high efficiency, smooth operation, fast heat dissipation, low temperature rise, Long service life..
  • [ Aluminum Alloy Case ] - Aluminum alloy case, light weight, fast heat dissipation and low temperature rise, anti-oxidation and anti-rust coating connecting piece, excellent waterproof and insulation..
  • [ Widly Application ] - The small vibration motor can be widely applied in Mining, metallurgy, coal, electricity, construction, chemicals, medical equipment, food machinery, etc..
Check Stock

Jonard Tools WSC-826 Adjustable Wire Stripper & Crimper, 8 - 26 Awg

  • ✅ 【Multi-Function Wire Stripper】Come with self-adjusting jaws ideal for copper and aluminum cables, Thumbwheel micro adjusting swivel knob to strip wire smaller than 24 AWG Multifunction, made of steel by special hardened and using life-time.
  • ✅ 【Cable Crimping/Cutting】For stripping wire from AWG10-24, Alloy steel jaws cut for copper and aluminum cables from 10AWG to 24AWG, The cutter is made by special heat treatment and precision coating high-quality blade performs efficient cutting, For insulated terminals 22-10AWG, For non-insulated terminals 12-10AWG, 16-14AWG, 22-18AWG.
  • ✅ 【Self-Adjusting Stripping Pliers】 ( COPPER ADJUSTMENT BUTTON: the copper swivel knob micro-adjusts jaw tension and clearance for perfect stripping on smaller gauge wires beyond 20 AWG, A swivel knob can be adjusted with smaller wires when more tension is required) For auto ignition terminals 7-8mm, For striping the plastic or rubber insulation of the single, multiple cables and wires of 0.5-6mm, For cutting and stripping wire and cable.
  • ✅【Non-Slip Comfort Grip】Touch grips provide maximum comfort and reduced hand fatigue, Plastic & cushion grip handle, provides maximum leverage (PP& TPR) and increased comfort making the grip Self Adjusting.
Check Stock

10 Wrap Coils Tattoo Machine, Tattoo Machine Dual Coils Alloy Tattoo Machine Professional Tattoo Supplies, ZZ085

  • 10 coil: imported copper wire, 10 coils are wound with standard copper wire and 47UF capacitance value to ensure more stable work.
  • Voltage stability: The working voltage is in the range of 6-10V, the normal starting voltage is 5V, and then it enters the working voltage range. Stable voltage fluctuation, safer.
  • Double coils: Double 10wrap coils, the current transmission capacity is more stable, the smoothness of the tattoo is improved, and the coloring effect is good.
  • Light alloy material: The shell is made of high-quality aluminum alloy, which is sturdy and durable to ensure a long service life.
  • Unique appearance: Unique appearance design of the body, beautiful and generous, suitable for beginners and professional tattooists..
Check Stock

BestEquip Wire Stripping Machine 0.06' -1.5',Automatic or Hand-crank Wire Stripper Machine 11Holes & 10 Blades, Automatic Wire Stripping Tool Motor Rated Speed 1400Rpm,for Recycling Copper Wire

  • ...ardness blades to ensure its operational stability..
  • Wide Compatibility: The electric motor powers drill-driven technology, while the adjustable blades and rollers fit all wire sizes with diameters from 1.5 mm (0.06") up to 38 mm (1.5")..
  • High Stripping Efficiency: The wire stripping machine features full-closed pure copper quadrupole motor with 400w high power, offering fast speed 1400Rpm. Big fan for fast heat dissipation. The gearbox leads to fast stripping speed. It creates a fast stripping speed of 60 feet per minute..
  • Effortless to Use: The emergency stop button for unforeseen wire jams. All you have to do is slip the intact wire into the feeding hole and turn on the switch. 10 blades for 10 holes, besides, free 10 blades for your wire stripping. A protective cover for high security and ensuring continuous high performance..
  • Extensive Use: This machine is ideal for whatever hard wire or soft wire, it can be easily stripped by using this model. Such copper wire recycler will detach the plastic and rubber insulation from undamaged scrap wire, a must-have for copper wire recycling..
Check Stock

Goupchn Multimeter Test Leads Kit with Alligator Clips Wire Piercing Probes Banana Plug to Mini Grabber Test Hook Clips Wire Replaceable Precision Sharp Probes Set for Electrical Testing

  • Excellent Quality: Multimeter test leads with 4mm standard safe banana plugs are made of high quality copper material which have strong conductivity,....
  • Replaceable: Multimeter test leads set contains 4pcs 2mm copper needles and 4pcs 1mm gold-plated sharp needles. They can be switched to meet your....
  • Minigrabber: Copper alloy test hook clips are different from traditional. Higher quality and softer. The inner diameter of the copper wire is 1 cubic....
  • Wire Piercing: Wire piercing probes are made of stainless steel which can piercing the wires without damage. Probe thickness: 0.7mm. The other end is....
  • Wide Use: Multimeter test leads kit works perfectly with any multimeter and test instrument. Replaceable probes, banana plugs, alligator clips,....
Check Stock

Leviton 5243 15 Amp, 120/277 Volt, Duplex Style Two 3-Way Combination Switch, Commercial Grade, Light Almond

  • AC quiet switches have silver alloy contacts and receptacles have double-wire contacts for maximum conductivity.
  • Terminal screws accept up to No. 12 AWG copper or copper-clad wire.
  • Break-off tabs on devices with switches permit conversion to separate feeds.
Check Stock

Leviton 5241 15 Amp, 120/277 Volt, Duplex Style Single-Pole/3-Way Ac Combination Switch, Commercial Grade, Brown

  • AC quiet switches have silver alloy contacts and receptacles have double-wire contacts for maximum conductivity.
  • Terminal screws accept up to No. 12 AWG copper or copper-clad wire.
  • Break-off tabs on devices with switches permit conversion to separate feeds.
Check Stock