Reviews Cooler Shingle

Western Red Cedar Shingles Red Label - Hobby Pack

  • 18” long and 3” to 8” wide shingles.
  • 3/8” to 7/16” thick on the butt end and tapers to 1/8” thickness.
  • Total of 12 square feet in pack which averages 8 running feet of the 18” shingle.
  • This pack should cover 4-6 sqft with an 8" exposure on shingle..
Check Stock

Haag 4/09 Shingle Gauge

  • Measures the thickness of shingle and based on analyses correlates that thickness to warranty level.
  • Designed with the strictest analytical tolerances possible.
  • Scales for both 3-Tab Organic and Laminated shingle varieties.
  • A great tool important for determining what a comparable replacement shingle might be.
Check Stock

Shingle Eater 6127

  • STRONG: The Shingle Eater 6127 has a 46.5” handle and 10 teeth. Its foot plate is flame-hardened and heat-tempered and contains a base plate that features stiffening corrugations..
  • WEIGHT: The Shingle Eater is made of light weight carbon steel pipe that provides a rugged yet balanced feel..
  • DURABLE: The 6127 is designed for steeper pitched roofs and the quality can be felt in the welding and finishing, including a yellow powder coated finish..
  • MADE IN THE USA: Shingle Eater has been making high-quality roofing tools since 1981 and are proudly built in the USA.
Check Stock

Shingle Gauge 4/09, Roofing Tools and Equipment for Measuring Shingles Thickness, Roof Pitch Gauge and Roof Measuring Tool, Professional Tile Device for Roofer, Claim Adjuster, House Owner

  • 1【Easy to Use】4/09 shingle gauge is easy tools to measure the thickness of roof shingles, black digits writing on silver guage are very readable, it is a essential tool for roofers and insurance adjusters. Of course, it is great roofing tools for house owner to inspect roofs..
  • 2【Durable & Strong】This pitch gauge are 100% stainless steel, it is so sturdy and not easy to break or ruptured, you can freely use it in any roof works..
  • 3【Function】This Shingle gauge is a measuring tool for roof tiles, it is large enough to hold next to the shingle and take a photo showing the size of the shingle, it is simple and easy to use. On other side has a 5-inch ruler..
  • 4【Portable and Light-weighted】This high quality roof pitch measuring gauge is small size- ‎6 x 1.5 x 0.25 inches, and its weight only ‎3.52 ounces, it is extremely portable and can be taken as handy tools conveniently..
  • 5【Note】Please kindly note this shingle gauge only use for shingles manufactured January 2011 or before due to changes..
Check Stock

4/09 Shingle Gauge, Engineering Shingle Gauge Tool, Roof Shingles Measuring Tool, Roofing Tools And Equipment, Roofing Tools, Measures And Analyze the Thickness of Shingle

  • 【4/09 Shingle Gauge】4/09 Shingle Gauge estimates the warranty level of asphalt composition shingles 3-tab Fiberglass, 3-tab Organic, and Laminated..
  • 【Function】Measures the thickness of shingle and based on analyses correlates that thickness to warranty level.Designed with the strictest analytical tolerances possible..
  • 【Professional Tools】This is a roofing tools and equipment that is designed with the strictest analytical tolerances and is to evaluate the relationship between the thickness of shingle and the warranty period..
  • 【Good Choice】 The roof shingles measuring tool has a 5-inch ruler on one side..
  • 【Pay Attention】This gauge is for use only on asphalt composition shingles installed prior to January 2011..
Check Stock

Qualcraft 2571 Industries General Purpose Strip Fast Shingle Remover, 27-1/2 in H, Steel, Powder Coated

  • The strip fast shingle remover is the ideal tool for removing fiberglass or asphalt roof shingles.
  • The all steel contraction of the strip fast shingle remover guarantees the toughness needed to perform the application.
  • The strip fast shingle removers feature replaceable, serrated tempered Carbon stell blades and skid plates.
Check Stock

Dyno Seasonal Solutions 50 Count No Ladder Gutter and Shingle Clips, Clear

  • 50 count Clear No Ladder Gutter and Shingle Clips..
  • Hang lights faster, safer and easier in ¼ the time..
  • Designed for use with the No Ladder Light Hanging system (sold separately) but can be used with any threaded end pole..
  • 50 count Clear No Ladder Gutter and Shingle Clips.
  • Hang lights faster, safer and easier in ¼ the time.
  • Designed for use with the No Ladder Light Hanging system (sold separately) but can be used with any threaded end pole.
Check Stock

Snow Guards with Slotted Strap that Hook Under Shingle, Slate, Tile and Shake Roofs

  • Fast and Easy Installation with Lifetime Warranty!.
  • Non-corrosive polycarbonate snow guard solution for slate, asphalt shingle and composite tile roofs..
  • Simply slide the Shingle Snow Guard up under the tile or shingle to the desired position and then pull it down allowing it to catch on the pre-existing fastener..
  • Pre-assembled, heavy duty 16-gauge 304 stainless steel strap with an attached polycarbonate snow guard.
  • Two unique rolled tabs and stainless-steel screw with washer insure the Snow Guards are held firmly on the strap.
Check Stock

PeakWorks Fall Protection Safety Lifeline Rope Grab, Anchor 50' Vertical Cable, Galvanized Steel Snap Hook Harness Tools Equipment for Climbing, Rescue, Hunting, Roofing, V84084050

  • 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
  • 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
  • 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple s....
Check Stock

Western Red Cedar Shingles Red Label in Contractor Packs

  • 18” long and 3” to 8” wide shingles.
  • 3/8” to 7/16” thick on the butt end and tapers to 1/8” thickness.
  • Covers 20-25 square feet with a 7" exposure of the shingle.
  • This product cannot ship to P.O. box. Ships to Continential US only***.
Check Stock

Seymour SG1 36-Inch Asphalt Shingle Remover

  • 36, heavy duty, d-handle Shingle Remover, yellow fiberglass d-handle with solid fiberglass plug, 9x 9Blade double bolted to head.
  • A professional quality tool that makes shingle and nail removal easier.
  • Features an extra-strong steel brace and carbon steel skit plate.
Check Stock

18\ Perfection Blue Label Western Red Cedar Shingles - Contractor Pack

  • Covers 20-25 square feet with a 7" exposure of the shingle.
  • ***This item does not ship to P.O. box. Ships to Continential US only..
Check Stock

Roof Shingles Shingle Removal Tool Roofing Tools Pitch Hopper Shingle Nail Installer Roof Shingle Nail Puller Nail Remover Pry Bar For Safe Roof Shingles Replacement Roofing tools and Equipment

  • 【Durable & Anti-rust Steel.】Our Roof Shingles Remover is made of hard steel material and the 2-in-1 design is more accurate, efficient and safer for quick installing or pulling nails on your roof shingles. With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot Design for Secure Grip.】With the unique nail groove design, you can inlay the nail and work in the narrow space smoothly. This Shingle Removal Tool will allow the roofing nails driven perpendicular to roof that bring longer lasting repairs without damaging the shingles with your hammer..
  • 【Claw Tip for Nail Puller.】Our Shingle Nail Installer can easily pull out the nail from roofing shingles. Just drive the claw tip under the nail and twist, easily pull out the nail with less efforts that will definitely safe time and money..
  • 【Easy to Use & Handy】This roof shingle nail installer is just handy to carry on with 1.1 inch in width and 11 inches in length, which make roofers work more accurate, efficient and safer. Our Roof Shingles are handy and fit for simple storage..
  • 【A Must Have for All Roofers.】This shingles removal tool is a must-have for all roofers to remove or repair old or worn-....
Check Stock