Reviews Cooler Master Rgb Splitter

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches

  • 【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
  • 【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • 【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • 【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with this PWM fan splitter cable..
  • 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..
Check Stock

Cooler Master MasterLiquid ML120R Addressable RGB Close-Loop AIO CPU Liquid Cooler, 120 Radiator, Dual Chamber Pump, Dual MF120R Fans, Independently-Controlled ARGB LEDs for AMD Ryzen/Intel 1151

  • 120mm Radiator: low profile dual chamber addressable RGB pump with dual addressable RGB fans for push and pull air flow. Air flow – 66.7 CFM. Noise level – 30.0 decibels.
  • Addressable RGB fans and pump – color option can be controlled through Cooler Master software cm Plus.
  • Removable pump cap: never worry about installing the pump upside down. Pop out the cap and place it. Done..
  • Includes: Wired addressable RGB Controller for non RGB motherboards for customize colors.
  • Sleeved FEP Tubing’s – sleek black outer sleeves with FEP Tubing’s inside for durable lasting and flexibility.
  • Includes 1-to-3 addressable RGB Splitter cable for multiple ARGB fans.
  • Cpu socket support: Intel – LGA2066, LGA2011-v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD – AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

Cooler Master MasterLiquid ML240R Addressable RGB Close-Loop AIO CPU Liquid Cooler, 240 Radiator, Dual Chamber Pump, Dual MF120R Fans, Independently-Controlled ARGB LEDs for AMD Ryzen/Intel 1151

  • 240 millimeter Radiator low: profile dual chamber addressable RGB pump with dual addressable RGB fans for push and pull air flow.
  • Addressable RGB fans and pump: Color option can be controlled through Cooler Master software centimeter Plus.
  • Removable pump cap: never worry about installing the pump upside down.
  • Includes: Wired addressable RGB Controller for non RGB motherboards for customize colors.
  • Sleeved FEP Tubing’s: sleek black outer sleeves with FEP Tubing’s inside for durable lasting and flexibility.
  • Includes 1 to 3 addressable RGB Splitter cable for multiple ARGB fans.
  • Refer to the PDF attached below in technical Specification for user Manual.
  • Cpu socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

Cooler Master MasterCase H500M ATX Mid-Tower w/ 4X Side Tempered Glass Panels, and MasterLiquid ML360R Addressable RGB AIO CPU Liquid Cooler 28 Independently-Controlled LEDs Triple RGB Air Balance MF

  • QUIETLY IMPROVED V2 RBG With more vivid RGB lighting, enhanced cooling and significantly quieter performance, the ML240L V2 RGB sets the bar even higher for quality mainstream liquid coolers..
  • 3RD GEN. DUAL CHAMBER PUMP The copper plate heat exchanger anchors Cooler Master’s 3rd Gen. dual chamber pump, which features greater water volume capacity, improved flow rate between chambers, and triple industrial grade EPDM rubber gaskets..
  • SURFACE AREA INCREASED BY 25% The internal radiator fins are significantly deeper within its sleek frame, leading to highly efficient heat dissipation along the wider water channels..
  • ADVANCED SICKLEFLOW 120 RGB FANS With their ultra quiet rifle bearing, the translucent 7 blade Air Balance 2.0 fans provide higher air pressure (2.5 mmH2O) with less noise (27 dBA). The new frames feature a screw hole spine which improves overall structural durability..
  • RGB MOTHERBOARD SYNC OR WIRED CONTROLLER Can be synchronised to RGB compatible motherboard systems (4 Pin) or assigned manually via a wired controller and 3 to 1 splitter (included)..
Check Stock

COOLERMASTER PWM HUB,6 Ports for Addressable RGB Lighting with PWM,1 to 6 Multi Way Magnetic backplane Splitter 5V/3PIN RGB Case Fan Hub Adapter PWM ARGB Addressble Fan

  • Cooler Master 1 To 6 Multi Way Splitter 5V/3PIN RGB Case Fan Hub Adapter PWM ARGB Addressble Fan Power interface SATA.
  • MULTI CONNECTION: Up to 6 sets of Addressable RGB (3-pin) headers and PWM headers to meet your needs of connecting more devices..
  • BUILT-IN MAGNET: This compact HUB easily fits inside your case. It can attach to any metallic surface with built-in magnets..
  • SPACE SAVING: It will save your space effectively and make the cable management easier, and make the inside case neat and tidy.SATA POWER: Even with full loaded, it still can maintain stable output..
  • Special note: When using the connection to the product interface, please note that the requirements are required as required, otherwise the device will result in damage..
Check Stock

Cooler Master MasterLiquid ML360R ARGB Close-Loop AIO CPU Liquid Cooler, 360 Radiator, Dual Chamber Pump, AMD Ryzen/Intel LGA1200/1151

  • Exclusive tech cooler master controls quality and builds on decades of innovation with 100 percent in house design and manufacturing.
  • Dual dissipation our low profile dual chamber pump enhances performance and durability over our last gen single chamber pump designs.
  • Sizable performance leaps over last gen technology.
  • 360 millimeters radiator our aluminum 360 millimeters large surface radiator will remove excess heat from the CPU and cool with maximum efficiency.
  • Addressable RGB LED addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+ (To be released soon).
  • Sleeved FEP underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs inside the cooler.
  • Fan air pressure: 2.34 millimeter H2O (Max).
  • CPU socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock

Cooler Master AMD Wraith Ripper ThreadRipper TR4 High Performance CPU Air Cooler, Addressable RGB Threadripper logos display, 7 Heat Pipes, Dual Tower Heatsink, Wraith Armor Air-Guide

  • Designed & Optimized for Socket TR4Features a larger contact surface area that is specifically tailored for Ryzen Thread ripper.
  • Dual Tower Heatsink A combination of two sets of heatsink covers more surface area and dissipates heat more efficiently. The jet black paint enhances cooling performance.
  • Build-in Wraith Ripper RGB Software with our exclusive partnership Cooler Master and AMD designed a software that allows you to take full control of your rig's lighting..
  • Easy TR4 Mounting System Exclusive All-In-One TR4 mounting design for easy installationDescriptionThe Wraith Ripper is a product developed through an exclusive collaboration between Cooler Master and AMD. The MASTERFAN PRO 120 SERVO, seven Copper Heat pipes Air Cooler is designed to keep the AMD's 2nd Generation Ryzen Thread ripper CPUs cool under any computing condition. The dual tower heatsink covers more surface area. Creating a more effective way of dissipating heat. The Wraith Ripper's elegant Addressable RGB lighting, puts the power of creating the best lighting in your hands. The TR4 mounting system makes it the easiest Thread ripper cooler to install. The four long screws on the top of the air cooler gives you the easiest way to install on the TR4 bracket..
Check Stock

Cooler Master MasterAir MA410P TUF Gaming Edition RGB CPU Air Cooler w/ TUF Aesthetic, Independently ARGB LEDs, 4 Continuous Direct Contact 2.0 Heatpipes, Aluminum Fin, MF120R 120mm RGB Fans

  • Custom Colors –With a sturdy Master Fan 120 Air Balance RGB, Master Air MA410P is ready for more than 16. 7 million color options and fun effects to play with.
  • Continuous Direct Contact technology 2. 0 (CDC 2. 0) -by compressing heat pipes together, There is 45% more surface area on the cooler base, providing improved heat dissipation over the previous version, CDC 1. 0.
  • Precise Combination of Air Flow and Heatsink –The stacked fin array ensures the least amount of airflow resistance allowing cooler air into the heatsink. The patented X-vents and Air-Guide steer extra ventilation to the hottest spots.
  • Snap and play -intuitive fan bracket design makes upgrading and removing the fan a breeze.
  • Comes with the wired RGB LED controller for users who do not posses an RGB Capable motherboard.
  • CPU Socket Support - LGA2066, LGA2011-v3, LGA2011, LGA1151, LGA1150, LGA1155, LGA1156, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

ARGB Splitter Cable, 1 to 3 ARGB Extension Cable, 5V 3 Pin Addressable RGB Splitter Cable with 3 Pin Connector for Computer Chassis, CPU Cooler and 5V ARGB Fan, 11.8 Inches, 2 Pack

  • Package: 2PCS of ARGB 1 to 3 splitter cable 5V 3-pin (11.8 Inches), 8PCS of 3 Pin Connectors..
  • Function: ARGB splitter cable allows to extend and connect its addressable ARGB LED or ARGB fan through a single motherboard +5V 3 pin ARGB header. Addressable RGB - ARGB Splitter Extension Cable compatible with 5050/3528 RGB LED strip lights or ARGB fans..
  • Material: Genuine new copper cores, no recycled materials..
  • ARGB splitter cable compatible with ASUS, MSI, GIGABYTE and ASROCK addressable RGB motherboards..
  • Note: Only supports 3 pin 5V addressable rgb motherboard header, does not support 4 pin 12V RGB header..
Check Stock

2 pcs black 4 Pins LED Splitter Cable LED Strip Connector 4 Way Splitter Y Splitter for One to four RGB 5050 3528 LED Light Strips with 10x Male 4 Pin Plugs -30cm/12inch Long

  • 1 end to connect with LED RGB controller, the other ends for 4 Reel LED RGB strips.
  • This DC Power Adapter Cable splits 1 power signal into 4, enables you to connect 4color changing RGB LED strips to a single controller.
  • Power supply with sufficient amperage for 4 strips is required.
  • Package Content: 2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on the 4 pins, perfect conductivity)DescriptionDesign: 1 to 4 Splitter Cable Connect four color changing RGB 5050/3528 LED strips to a single controller with this 4 pin splitter cable. No soldering is required, simply match the arrows on the plug. Features: 1). The insulation plastic of this cord adopts high quality PVC, anticorrosive. 2). This extension cord contains 4 strands of pure copper wires inside, which ensures flexibility, durability, and perfect electric conductivity. 3). The cord and the 4pin plugs fit snug. 4). Easy to plug, reliable connection, excellent performance. Just buy with confidence! Note: A power supply with sufficient power for multiple led strips is required. Package Includes:2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on the 4 pins, perfect conductivity).
Check Stock