Reviews Cooler Master Geminii S524

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

Cooler Master MasterLiquid ML360R ARGB Close-Loop AIO CPU Liquid Cooler, 360 Radiator, Dual Chamber Pump, AMD Ryzen/Intel LGA1200/1151

  • Exclusive tech cooler master controls quality and builds on decades of innovation with 100 percent in house design and manufacturing.
  • Dual dissipation our low profile dual chamber pump enhances performance and durability over our last gen single chamber pump designs.
  • Sizable performance leaps over last gen technology.
  • 360 millimeters radiator our aluminum 360 millimeters large surface radiator will remove excess heat from the CPU and cool with maximum efficiency.
  • Addressable RGB LED addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+ (To be released soon).
  • Sleeved FEP underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs inside the cooler.
  • Fan air pressure: 2.34 millimeter H2O (Max).
  • CPU socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Check Stock

COMeap 5 Pin to 3X 15 Pin SATA Hard Drive HDD Power Adapter Cable Only for Cooler Master Modular Power Supply 20-in(50cm)

  • 『5P - 15P SATA』5 pin port to plug into CoolerMaster PSU, 15 Pin SATA port to plug into hard drive, riser card or other devices with SATA port.
  • 『Connector』Connector A: 5 pin male ( Only compatible with Cooler Master PSUs with single 5 pin port as listed ), Connector B: 3x SATA 15 pin female.
  • 『Compatibility』Only compatible with Cooler Master PSUs with single 5 pin port such as: V550 V650 V750 V850 V700 V1000 V1200 Semi modular M520/M620 ,etc.，Corsair semi-modular HX520W/HX620W/HX650W.
  • 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm), Quantity: 1pcs, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for some types of Cooler Master PSUs listed in the 3rd point, not compatible with other brand PSUs or types. If you use other incompatible brand PSUs or types, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types and contact us if you are not sure if it supports your power supply.
Check Stock

Cooler Master AMD Wraith Ripper ThreadRipper TR4 High Performance CPU Air Cooler, Addressable RGB Threadripper logos display, 7 Heat Pipes, Dual Tower Heatsink, Wraith Armor Air-Guide

  • Designed & Optimized for Socket TR4Features a larger contact surface area that is specifically tailored for Ryzen Thread ripper.
  • Dual Tower Heatsink A combination of two sets of heatsink covers more surface area and dissipates heat more efficiently. The jet black paint enhances cooling performance.
  • Build-in Wraith Ripper RGB Software with our exclusive partnership Cooler Master and AMD designed a software that allows you to take full control of your rig's lighting..
  • Easy TR4 Mounting System Exclusive All-In-One TR4 mounting design for easy installationDescriptionThe Wraith Ripper is a product developed through an exclusive collaboration between Cooler Master and AMD. The MASTERFAN PRO 120 SERVO, seven Copper Heat pipes Air Cooler is designed to keep the AMD's 2nd Generation Ryzen Thread ripper CPUs cool under any computing condition. The dual tower heatsink covers more surface area. Creating a more effective way of dissipating heat. The Wraith Ripper's elegant Addressable RGB lighting, puts the power of creating the best lighting in your hands. The TR4 mounting system makes it the easiest Thread ripper cooler to install. The four long screws on the top of the air cooler gives you the easiest way to install on the TR4 bracket..
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with this PWM fan splitter cable.
Check Stock

Elke Avond

  • Makes ordinary burger presses obsolete. Press and stuff 8 quarter pound burger patties at a time (each container holds approx. 2 pounds)..
  • Easily pop out a couple frozen burger patties directly onto the barbecue. The Burger Master keeps them separate and they don't stick..
  • Individually seals each burger patty to prevent freezer burn..
  • Stacks easily in the freezer, fridge or cooler so burgers are ready to grill when you are! Dishwasher Safe..
  • This is the original Burger Master from Shape+Store. Do not settle for imitations..
Check Stock

Cooler Master New MasterGel Maker, High Performance Heatsink Thermal Paste, 11 W/mK Thermal Conductivity Compound for CPU and GPU Coolers, Nanoscale Grease, Flat-Nozzle Applicator for Easy Use

  • EXTREME THERMAL CONDUCTIVITY - MasterGel Maker (11 W/mK) features a nano-tech compound for premium thermal conductivity between the CPU or GPU and cooler contact plate.
  • This level of thermal paste is ideal for overclocking or extreme gaming.
  • ZERO ELECTRICAL CONDUCTIVITY - MasterGel eliminates the risk of electrical transmission to protect hardware such as gaming motherboards or graphics cards against the risk short circuiting.
  • EASY APPLICATION - The Cooler Master patented flat-nozzle syringe makes the application of the thermal grease super easy, precise and even: This innovative design allows the compound to be spread smoothly in seconds without any mess.
  • MASTERING COOLING - Cooler Master’s MasterGel series allows users to replace standard in-box thermal pastes with a dramatically more effective product which in turn augments overall cooling performance.
  • Works with both liquid and air cooling systems.
  • CLEANING CLOTH - Includes a cleaning wipe to remove any leftover grease on the processor or graphics card.
  • A large cap keeps the thermal paste syringe well-sealed and clean when not in use.
  • 1.5 ml, Specific Gravity 2.5 g/cm³ (25°C).
Check Stock

PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches

  • 【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
  • 【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • 【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • 【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with this PWM fan splitter cable..
  • 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..
Check Stock

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable，NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock

Cooler Master i30 CPU Cooler - 92mm Low Noise Cooling Fan&Pure Aluminum Solid Pressure Heatsink for Intel Socket LGA 1150/1151 / 1155/1156/1200

  • Cooler Master i30 MINI CPU Cooler 92mm Quiet Fan For Intel 1150 1151 1155 1156 1200 Computer Case CPU Radiator 3pin 9.2cm Cooling Fan.
  • Rated Voltage : DC 12V Fan Speed : 2600 RPM±10%.
  • Heatsink: 90 x 30mm Fan Size: 95 x 25mm Bearing Type : Alloy.
  • Package included: 1 x CPU Cooler Unit 1 x Backplate 1 x English User Manual.
Check Stock

Cooler Master Master Accessory Vertical Graphics Card Holder Kit Version 2 with Premium Riser Cable PCI-E 3.0 x16-165mm Compatible with All Standard ATX Chassis MCA-U000R-KFVK01

  • Showcase Your Graphics Card: The vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the....
  • Compatible with all Standard ATX Chassis: The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available....
  • Modular, Instantly Adjustable Design: The position of the GPU can move back and forth to allow cables to pass through chassis with either closed or....
  • Durable, High Quality Materials: Thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder..
  • Cooler Master Riser Cable Version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package..
Check Stock

Burger Master Innovative 8 in 1 Burger Press and Freezer Container

  • Makes ordinary burger presses obsolete. Press and stuff 8 quarter pound burger patties at a time (each container holds approx. 2 pounds)..
  • Easily pop out a couple frozen burger patties directly onto the barbecue. The Burger Master keeps them separate and they don't stick..
  • Individually seals each burger patty to prevent freezer burn..
  • Stacks easily in the freezer, fridge or cooler so burgers are ready to grill when you are! Dishwasher Safe..
  • This is the original Burger Master from Shape+Store. Do not settle for imitations..
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • ...ter Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from the engine heat * Pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads * Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias.
Check Stock