Reviews Control cable

Replacement Dometic SeaStar Control Cable Type 3300/33C Cable Universal for Yamaha Outboard Motor Honda Teleflex Marine Boat Cable Replace SeaStar Solutions Remote Control Throttle Shift Cable, 20ft

  • REPLACeMENT 20 FEET MARINE CONTROL CABLE - Specially designed to fit SeaStar Solutions and other Controls which accept universal type 10-32 Threaded Cable Ends. These control cables can be used in any boat and are by far the best choice for long runs, twin stations or other difficult routings with multiple cable bends. Replacing a broken or worn control cable regularly can ensure superior performance and safe driving experience of your Yamaha outboards..
  • FITS THE FOLLOWING MACHINES - Replacement 20 FT CC3320XX Dometic SeaStar Control Cables with 10-32 UNF thread is compatible with Force Marine Control Cable, Chrysler Marine Control Cable, Honda Marine Control Cable, Nissan Marine Control Cable, Suzuki Marine Control Cable, Tahatsu Marine Control Cable, Yamaha Marine Control Cable, Teleflex Marine Control Cable, Morse Marine Control Cable. Please kindly check the fitment and part number before ordering, Thanks!.
  • REPLACES PART # - CC3320XX, Replaces Teleflex CC33220, Replace SeaStar XTREME CCX63320 | Universal type 3300/33C cables are designed to fit aftermarket engine controls as well as OEM units from BMW, Chrysler, Honda, Nissan, Suzuki, Yamaha and others, they are offered for demanding applications in which a smooth feel at the control is essent....
Check Stock

Replacement Lawn Mower Engine Control Cable For Troy Bilt 946-1130 746-1130

  • Replacement Lawn Mower Engine Control Cable 946-1130 746-1130 YUELMAN.
  • Engine Control Cable as pictured Item Specifications: May be known as a control cable, choke cable, choke control, choke control cable, control assembly cable, brake cable Conduit Length: 40" Inner Wire Length: 53" YUELMAN.
  • Part Number: 946-1130 Replaces Part Number: 746-1130 YUELMAN.
Check Stock

Replacement Control Pod Y Splitter Cable Compatible for Logitech Z-5500 Z5500 Dual Subwoofer System

  • This Y splitter cable is custom made for the purpose of splitting a z-5500's control pod signal into two subwoofers and their satellite speaker. If you have two sets of Logitech Z-5500 Speakers with only one control pod, then you can use this splitter cable to connect your control pod to the two sets of speakers! You will have control over both sets of speakers at the same time to make them work together. Imagine the power of 1100w RMS from your speakers..
  • The length of the cable is ~3 ft each leg (total ~6ft for both legs). 1 Male to 2 Females. Male connects to the control pod, females connect to the two subwoofers..
  • You need to make sure your control pod can work on each individual subwoofer and then you can use this Y splitter cable..
  • This cable is custom made to work perfectly with z-5500 control pods. The wiring is DIFFERENT from a VGA splitter cable (A VGA splitter cable WILL NOT work on a z-5500 control pod and might fry your pod, I tried it at the expense of my own control pod)..
  • The cable is made using the top quality cables with triple shields to prevent EMI/RFI to ensure best sound quality..
Check Stock

prime&swift 183281 532183281 Lawn Mower Engine Zone Control Cable Replacement for Crafts/Man Lawn Mower 917 Parts Zone Control Cable 183281198463 183281 198463

  • [Control Cable Specs]:Cable Length 53-1/2inch [135.8cm].
  • [Engine Stop Cable 532183281 ]:The control cable connects to the control handle of the lawn mower then to the govenor of the engine. When 532183281 is engaged the mower blade will begin to rotate, when the handle is released the blade and engine will stop..
  • [Directly Replaces]:Replaces 198463,532198463 ,532183281,183281,532198463,198463,14599,.
  • [Lawn Mower Zone Control Cable 183281 Function]:Stop the blade when the control handle is released on walk-behind lawn mowers.If the cable is broken it will cause the brake to not release even when the lever is pressed..
  • [Engine zone control compatibility]: 96114000401,96114000201,388160,SO65N21RH,96136001101,96112003700,A149K21 (96136001101).
Check Stock

Leopop 532183281 183281 Engine Zone Control Cable for Craftsman Husqvarna Poulan Roper Weed Eater Lawn Mower 183281198463 183281 198463 Replacement Cable 917 Parts Zone Control Cable

  • Leopop 532183281 183281 Engine Zone Control Cable for Craftsman Husqvarna Poulan Roper Weed Eater Lawn Mower 183281198463 183281 198463 Replacement Cable 917 Parts Zone Control Cable.
  • Conduit Length 46-1/2 Inch [118Cm].Engine Zone Control Fit For 96114000401,96114000201,388160,So65N21Rh,96136001101,96112003700,A149K21 (96136001101).
  • Please Compare Your Old Products With The Pictures And Product Description Carefully If You Are Not Sure If It Will Fit.Compatible With Poulan Lawn Mower / Garden Tractor Po500N22S Po500N22Sh Po500N22Shx Po500N22Sx Pr550N22Sh Pr550N22Shx ..
Check Stock

Replacement Control Pod Compatible for Klipsch ProMedia 4.1 Computer Speakers Wired Remote

  • This is a new version replacement control pod for Klipsch ProMedia 4.1 Computer speakers. If your old control pod is missing or broken, this is just what you need..
  • It has the same functions of the original control pod. You can simply connect this control pod to your subwoofer/speakers and your sound device (MP3 Player, Computer, Cellphone etc.) with the included cables..
  • The subwoofer cable is detachable from the control pod. The control pod is stand alone. You do not need to attach it to speakers. You can place it in a spot that is easy to reach..
  • What's included in the package: Control Pod, Subwoofer Cable, Audio Cable (6ft)..
  • Speakers and Subwoofer are NOT included!.
Check Stock

RIDGID K-400 Drain Cleaning 115-Volt Drum Machine Kit with AUTOFEED Control and C-32IW 3/8 x 75 Cable

  • 120-VOLT DRUM MACHINE: Offers reliable power that cleans even the toughest of everyday 1-1/2" to 4" drain line blockages in tubs, showers, and sinks....
  • ALL-IN-1 PACKAGE: Includes an induction-style belt motor that spins at 165 RPMs, AUTOFEED Control, solid core cable, a 4-piece tool set, a pair of....
  • CORROSION-RESISTANT CABLE DRUM: Comes with 75 ft. of 3/8-in. diameter rugged and kink-resistant C-32 Integral Wound solid core cable that is ideal for....
  • EASY TRANSPORTATION: Integrated transport cart with fold over handle features large heavy-duty wheels that easily navigate over bumps and stairs for....
  • PATENTED CABLE CONTROL SYSTEM: AUTOFEED Control automatically advances and retrieves cable at 10-14 ft. per minute, and the cable control system....
Check Stock

Dometic SeaStar Xtreme Control Cable, CCX20513, 13ft.

  • SeaStar XTREME OEM Direct-Replacement Type Control Cable for 1979-date BRP/OMC/Johnson/Evinrude/Gale with BRP/OMC Controls.
  • XTREME Control Cables have a 4” minimum bend radius versus an 8” minimum bend radius for standard cables.
  • Ideal for foot throttle applications on performance/bass boats and Designed for Complex and/or Long Cable Runs (or to simply create a superior feel).
  • 0.34” Super Tough HDPE Jacket which resists abrasion and withstands the effects of UV, salt water, chemicals, gasoline and oil.
  • Before Ordering, Please Verify this is the Correct Cable Length for your Application. For Assistance, see the Image to the Left on ‘How To Measure Control Cables’.
Check Stock

Dometic SeaStar Xtreme Control Cable, CCX20510, 10ft.

  • SeaStar XTREME OEM Direct-Replacement Type Control Cable for 1979-date BRP/OMC/Johnson/Evinrude/Gale with BRP/OMC Controls.
  • XTREME Control Cables have a 4” minimum bend radius versus an 8” minimum bend radius for standard cables.
  • Ideal for foot throttle applications on performance/bass boats and Designed for Complex and/or Long Cable Runs (or to simply create a superior feel).
  • 0.34” Super Tough HDPE Jacket which resists abrasion and withstands the effects of UV, salt water, chemicals, gasoline and oil.
  • Before Ordering, Please Verify this is the Correct Cable Length for your Application. For Assistance, see the Image to the Left on ‘How To Measure Control Cables’.
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Check Stock

881170A15 Boat Motor Side Mount Remote Control Box With 8 Pin for Mercury Outboard Engine PT, Left Side

  • 2 with power trim &15ft cable, Built-in warning horn.
  • -Fits Mercury Outboard Rigging Parts, Controls & Gauges Remote Controls and Components Side Mount 1994 & Up - Cat.# 90-8M0125572 Remote Control-4000 Side Mount(Power Trim) -Fits Mercury (1986 thru 1993) Outboard COMMANDER 2000 REMOTE CONTROL (with integral power trim) -Fits Mercury 1994 & Up Outboard Commander 2000 Remote Control (with integral power trim) -Does not include throttle & shift cables.
  • -Fits Mercury Force 1993 and newer outboards 40hp and higher utilizing style cables (with power trim). -Remote Control cables need Gen I style to connect to control box. -When used with MY2005 and newer 8/9.9/15/20 four-stroke outboards an adapter harness 84-892473A01 is required. -for MY2005 and newer 8/9.9 Four Stroke outboards SAE T/S cables must be used..
Check Stock

For Mercury Top Mount Control box 8M0059686 Throttle Control Box of Outboard Engine With lifting switch Gen II

  • 2 with power trim &15ft cable, Built-in warning horn.
  • -Fits Mercury Outboard Rigging Parts, Controls & Gauges Remote Controls and Components Side Mount 1994 & Up - Cat.# 90-8M0125572 Remote Control-4000 Side Mount(Power Trim) -Fits Mercury (1986 thru 1993) Outboard COMMANDER 2000 REMOTE CONTROL (with integral power trim) -Fits Mercury 1994 & Up Outboard Commander 2000 Remote Control (with integral power trim) -Does not include throttle & shift cables.
  • -Fits Mercury Force 1993 and newer outboards 40hp and higher utilizing style cables (with power trim). -Remote Control cables need Gen I style to connect to control box. -When used with MY2005 and newer 8/9.9/15/20 four-stroke outboards an adapter harness 84-892473A01 is required. -for MY2005 and newer 8/9.9 Four Stroke outboards SAE T/S cables must be used..
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock