Reviews Control Arm Ball Joints

Detroit Axle - 8 Lugs Front Wheel Hub Bearing + Upper Control Arm w/Ball Joint Suspension Kit Replacement for Silverado Sierra 2500 3500

  • Replacement for 4WD & 3-Groove Pitman Arm Models.
  • Idler Arm Does NOT fit models with Rack & Pinion Steering.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Wheel Hubs & Bearings + 2x Front Upper Control Arms w/ Ball Joints + 2x Front Lower Ball Joints + 2x Front Sway Bars + 4x Outer & Inner Tie Rods + 1x Idler Arm + 1x Pitman Arm + 1x Idler Arm Bracket Assembly.
  • Hub Specifications: Position: Front | Lugs: 8 Bolt | ABS Type: Sensor Wire | Flange Type: 4-Bolt Square.
Check Stock

Detroit Axle - Front Upper Control Arms w/Ball Joints Suspension Kit Replacement for Sierra Silverado 2500 3500 HD Hummer H2

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Upper Control Arm w/Ball Joints, 2x Front Lower Ball Joints, 2x Front Sway Bar End Links, 4x Tie Rod Ends, 1x Steering Pitman Arm, 1x Front Idler Arm and 1x Front Idler Bracket Pivot.
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs.
Check Stock

Detroit Axle - Front Upper STEEL Control Arms Lower Ball Joints Replacement for Chevy GMC Silverado Suburban Sierra 1500 Avalanche Tahoe Yukon - 4pc Set

  • Lower Ball Joints fit Steel Control Arms.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Upper Control Arm w/ Ball Joints + 2x Front Lower Ball Joints.
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs.
Check Stock

Kryptonite Upper Control Arm Kit For 2001-2010 Chevy GMC 2500HD 3500HD Pickup

  • 4 x Control arm sleeves / 8 x Control arm Bushings.
  • 2 x Kryptonite Bolt on Upper Ball Joints.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

Detroit Axle - 4WD 8-Lug Front Axle + Wheel Hub Bearing + Upper Control Arm Ball Joints Suspension Kit Replacement for Silverado Sierra 2500 HD 3500 Hummer H2

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front CV Axle Drive Shaft + 2x Front Wheel Hub & Bearings + 2x Upper Control Arm w/ Ball Joints + 2x Lower Ball Joints +2x Sway Bars + 4x Inner and Outer Tie Rods + 2x Idler Arm & Pitman Arm + 1x Idler Arm Bracket.
  • Hub Specifications: Position: Front Left and Right | Drive: 4WD | Lugs: 8 Bolts | ABS Type: Sensor Wire | Flange: 4-Bolt Square.
Check Stock

Detroit Axle - 4WD Front Ball Joints + Sway Bars + Tie Rods Suspension Kit Replacement for Cadillac Chevy GMC Escalade Yukon Tahoe K1500 K2500 K1500 Suburban - 15pc Set

  • Replacement For 4WD Models w/45.79mm Diameter Lower Ball Joint.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: (2) Front Upper Ball Joints, (2) Front Lower Ball Joints, (2) Front Sway Bar Links, (2) Outer Tie Rods, (2) Inner Tie Rods, (2) Tie Rod Adjusting Sleeves, (1) Pitman Arm, (1) Idler Arm and (1) Idler Arm Bracket.
  • Detroit Axle Suspension parts are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs.
Check Stock

Powerbuilt Ball and U Joint Service Set 23 Piece Tool Kit Remove and Install Ball Joints Receiving Tube Adapters Sockets - 648617

  • Removes and installs pressed-in type ball joints found on most vehicles.
  • Changes ball joint without removing control arm from the vehicle.
  • Tools can also be used to remove and install U Joints.
  • Kit services: most Domestic and import rear wheel drive vehicles.
  • Remove and install pressed-in Ball Joints found on most vehicles.
Check Stock

Detroit Axle - Front Upper Control Arm Tie Rod Sway Bar Replacement for Chevy GMC Silverado Suburban Sierra Yukon XL 1500 Tahoe Yukon Cadillac Escalade - 12pc Set

  • Lower Ball Joints Fit Steel Control Arms Only!.
  • Kit Includes: 2x Front Upper Control Arm With Ball Joint + 2x Front Sway Bar End Links + 2x Front Lower Ball Joints + 4x Front Tie Rods + 2x Rack And Pinion Boots.
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

Powerbuilt Ball Joint and U-Joint Service Tool Set Remove and Install Ford GM Dodge Adapters Included - 648602

  • Removes and replaces all sizes of press-fit ball joints found on domestic and import rear wheel drive cars..
  • Allows changing ball joint without removing control arm from the vehicle.
  • Also can be used to remove and replace U-Joints.
  • EASY TO READ: Includes usage instruction with photos.
Check Stock

BTSHUB 5 in 1 Ball Joint Separator Pitman Arm Puller Tie Rod End Front End Service Splitter Removal Tool Set

  • This ball joint separator tool set is designed for removal of most of popular types of pitman arms, tie rods, and ball joints on most compact cars, mid-size cars and light pickup trucks.
  • Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • Allows for easy removal of most popular types of pitman arms, tie rods and ball joints.
  • Durable heavy duty forged tools constructed from heat-treated alloy steel with anti-rust plating finish.
  • You will get 1x Ball joint separator, 1x Tie rod and ball joint remover, 1x Conical pitman arm puller, 1x Pitman arm and tie rod end puller, 1x Pitman arm puller, 1x Well-organized plastic carry case.
Check Stock

ABN Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller 5 Piece

  • Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller, Constructed from high strength steel for extra durability and longevity.
  • Allows users to easily service all types of front end issues, everything from tie rods, u joints, ball joints, pitman arms, and others.
  • Includes: 1x Pitman Arm/Tie Rod End Puller, 1x Ball Joint Separator, 1x Pitman Arm Puller, 1x Ball Joint/Tie Rod End Remover, 1x Tie Rod/Inner Bearing Race Puller.
  • Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth.
  • This is a must have for anyone servicing vehicles.
Check Stock

Detroit Axle - 2WD Front Upper Control Arms w/Ball Joints + Sway Bars + Tie Rods + Pitman Idler Arms Replacement for Ford Expedition F-150 F-250 Lincoln Navigator - 12pc Set

  • 2-Wheel Drive Models Only (2WD)**There are two different versions of idler arm for these vehicles. This kit provides an idler arm with a 2.5" bolt....
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Lower Ball Joints + 2x Front Upper Control Arms w/ Ball Joints + 4x Front Outer Inner Tie Rod Ends + 2x Front Sway Bar Links +....
  • Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
Check Stock