Reviews Contractor Table Saw

SAWSTOP 10-Inch Contractor Saw, 1.75-HP, 30-Inch Standard Fence Assembly (CNS175-SFA30)

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
  • CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw..
  • UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price..
  • 30-INCH STANDARD FENCE ASSEMBLY: This aluminum fence assembly is engineered for the ideal balance between lightweight utility and accurate lockdown..
Check Stock

Kobalt KT1015 Table Saw Motor Brushes Item 486267 Carbon Brush 2pcs 0486267

  • Ill-fitting dado throat plates can cause injury and equipment damage. This table saw dado throat plate will fit and lock in place like the stock....
  • Please take note that the dado throat plate looks very similar to another throat plate model. Ensure that your table saw model is listed or meets all....
  • Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models).
  • And with dimensions of 13 1/2" x 3 11/16" x 7/16", this throat plate is a universal fit for several 10" portable job site/contractor table saws that....
  • MADE FROM IMPACT-RESISTANT PC/PBT BLEND MATERIAL - This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance,....
Check Stock

Delta 36-5052T2 Contractor Table Saw with 52 Rip Capacity and Steel Extension Wings

  • IF ANY COMPONENT IS MISSING FROM YOUR ORDER PLEASE ACCEPT THE SHIPMENT AND CONTACT AMAZON. DO NOT RETURN THE ENTIRE UNIT BECAUSE OF A MISSING PART. WE WILL EXPIDITE THE DELIVERY OF ANY MISSING COMPONENT. THANK YOU.
  • THIS ITEM SHIPS IN 3 BOXES. YOU SHOULD RECEIVE THE FOLLOWING COMPONENTS - 36-5 Saw Body, 36-T52 52" Rails , 36-T53, Extension Table.
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods.
  • 52 Inch Rip Capacity handles large stock.
  • Smooth and dependable adjustable belt drive table saw.
Check Stock

Delta 36-5152T2 Contractor Table Saw with 52\ Rip Capacity and Cast Extension Wings

  • IF ANY COMPONENT IS MISSING FROM YOUR ORDER PLEASE ACCEPT THE SHIPMENT AND CONTACT AMAZON. DO NOT RETURN THE ENTIRE UNIT BECAUSE OF A MISSING PART. WE WILL EXPIDITE THE DELIVERY OF ANY MISSING COMPONENT. THANK YOU.
  • THIS ITEM SHIPS IN 3 BOXES. YOU SHOULD RECEIVE THE FOLLOWING COMPONENTS - 36-5 Saw Body 36-T52 52" Rails 36-T53 Extension Table.
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods.
  • 52 Inch Rip Capacity handles large stock.
  • Legendary Biesmeyer Fence Accurate to 1/64”.
  • Smooth and dependable adjustable belt drive table saw.
  • Cast iron table top with 2 cast iron extension wings.
  • Heavy duty one piece rail system for precision cuts every time.
Check Stock

Coleman Cable 02569 12/3 Hi-Visibility Low-Temperature Outdoor Extension Cord 100-Foot

  • High visibility blue low-temperature vinyl jacket, resists oil, grease, and moisture.
  • 3-conductor, 12-gauge wire, 15-amp rating.
  • Contractor grade circular saw, heater, and table saw.
  • Power indicator light lets you know where the power is.
Check Stock

SawStop MB-CNS-000 Contractor Saw Mobile Base

  • Fully-welded 1/4″ rigid steel construction.
  • Supports entire table for all Contractor Saw table lengths.
Check Stock

Southwire 2568SW0006 50ft 12/3 SJTW Premium High Visibility Low Temp Cord Blue, 50 ft

  • High visibility blue low-temperature vinyl jacket, resists oil, grease,moisture.
  • 3-conductor, 12-gauge wire, 15-amp rating.
  • Contractor grade, circular saw, heater, table saw.
  • Power indicator light lets you know where the power is 12 GAUGE HEAVY DUTY, 50 ft..
Check Stock

Delta 36-5000T2 Contractor Table Saw with 30\ Rip Capacity and Steel Extension Wings

  • IF ANY COMPONENT IS MISSING FROM YOUR ORDER PLEASE ACCEPT THE SHIPMENT AND CONTACT AMAZON. DO NOT RETURN THE ENTIRE UNIT BECAUSE OF A MISSING PART. WE WILL EXPIDITE THE DELIVERY OF ANY MISSING COMPONENT. THANK YOU.
  • THIS ITEM SHIPS IN 2 BOXES. YOU SHOULD RECEIVE THE FOLLOWING COMPONENTS - 36-5000 Tables Saw Body 36-T31 30" Rails.
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods.
  • 30 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY.
  • Legendary Biesmeyer Fence Accurate to 1/64”.
  • Smooth and dependable adjustable belt drive table saw.
  • Cast iron table top with 2 stamped steel extension wings.
  • Heavy duty one piece rail system for precision cuts every time.
Check Stock

Delta 36-725T2 Contractor Table Saw with 30 Rip Capacity and Steel Extension Wing

  • Powerful 1. 75 Hp Contractor Grade motor easily handles hardwoods.
  • 30 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY.
  • Smooth and dependable adjustable belt drive table saw.
  • Cast iron table top with 2 stamped steel extension wing.
  • Heavy duty rail system for precision cuts every time.
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • ...an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands and fingers out of harms way..
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the following specs for a proper fit. The Miter Slot should be a ¾” wide x 3/8” deep slot. Your saw must measure at least 27” from the front of the saw to the back. The miter slot must be 4” to 5 ¾” from the installed table saw blade. PLEASE NOTE: that the Dubby WILL NOT work on most JOBSITE style table saws. Please measure your saw before ordering..
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • ...an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands and fingers out of harms way..
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the following specs for a proper fit. The Miter Slot should be a ¾” wide x 3/8” deep slot. Your saw must measure at least 27” from the front of the saw to the back. The miter slot must be 4” to 5 ¾” from the installed table saw blade. PLEASE NOTE: that the Dubby WILL NOT work on most JOBSITE style table saws. Please measure your saw before ordering..
Check Stock

Fulton 110V Single Phase On/Off Switch with Large Stop Sign Paddle for Easy Visibility and Contact for Quick Power Downs Ideal for Router Tables Table Saws and Other Small Machinery

  • We have all been in a situation where we need to quickly turn the power off on our router table or contractor table saw and both of our hands are a bit pre-occupied. Reaching down and underneath your router table or contractor table saw to try and locate the power switch can be very cumbersome as well as very dangerous while your feeding stock through.Many router table setups don’t even have an external power switch separate from the router itself..
  • With this uniquely designed and easy to locate Paddle Button Stop Power Tool Switch you can simply bump the large stop sign paddle with your knee or hip to shut the power off. That means both of your hands can stay engaged on the project while you bump the power off with your hip or knee. A large green START button is always visible on the top side of the paddle. Simply push the START button to power on..
  • Install the switch near or at hip level or in a position that you will be able to bump it when needed. The switch comes with installation hardware and can be mounted to most any type of material. The unit has two cords. The heavy duty female cord is 18” long and designed to accept the power source plug from your power tool. The heavy duty male cord is approximately 66 inches long and is used to pl....
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock