Reviews Constant Velocity Joints

GM Genuine Parts 23474674 Front Wheel Half-Shaft Constant Velocity (CV) Boot Kit with Clamps

  • Universal constant velocity joint boot replacement is designed to easily replace your old, worn-out boot and protect your car's auto parts.
  • Every tool in this kit is ideal to easily operate in the tight spaces where your constant velocity joints are located.
  • The gaiter boot is designed to fit almost any vehicle due to its universal form and stretchable materials.
  • cut it to the size that fits your vehicle.
  • It is resistant to oil & grease, abrasion, grit, extreme of temperature, tear and imapact damage.
  • 1 Year Warranty.It is a universal product. We suggest that customers check the list and dimensions to see if they match your car before placing an order.
Check Stock

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. , RED

  • Rear Drive Shaft Axle Assembly For 2004-2008 Ford F-150 RWD 4.2L 4.6L 144.7 or 144.5 Wheel base, w/10 Bolt Differential Cover.
  • Shaft Length Compressed (in): 90 3/4" | Shaft Diameter (in): 2-7/8 Inch | Measure the Length to Confirm before Order.
  • This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
  • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple.
  • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle.
Check Stock

Swpeet 10Pcs CV Joint Boot Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars

  • Bailcast's universal constant velocity joint boot replacement is designed to easily replace your old, worn-out boot and protect your car's auto parts.
  • The Bailcast's gaiter boot is designed to fit almost any vehicle due to its universal form and stretchable materials.
  • cut it to the size that fits your vehicle.
  • Every tool in this kit is ideal to easily operate in the tight spaces where your constant velocity joints are located.
  • It is resistant to oil & grease, abrasion, grit, extreme of temperature, tear and imapact damage.
Check Stock

Worlde Panda MINI Portable 25 Keys USB MIDI Keyboard MIDI Controller with Drum Pad

  • 1. 8 Trigger Pads with velocity and assignable to controllers, with 3 velocity curve and one constant velocity..
  • 2. 25 keys with velocity assignable to controllers, with 3 velocity curve and one constant velocity..
  • 3. 4 assignable control knobs, 4 assignable control sliders, 4 banks for different settings.
  • 4. USB interface, adaptable to USB 2.0(FULL SPEED). Power supplied by USB..
  • 5. Compatible with Win XP/Vista and Mac OSX. Drive free and hot-plug supported..
Check Stock

Traxxas 6852X 6852X Driveshaft Assembly Rear Slash 4x4

  • Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer.
  • The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.
  • U-joint pins are held captive so you never have to worry about losing a pin.
  • Gleaming nickel-plated shafts and black silicone boots add a custom look.
  • Rear axles for 1/10 Rustler and 2WD Stampede.
Check Stock

Traxxas 5451R Revo/Maxx Steel CV Driveshafts (Assembled with Boots)

  • Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks.
  • Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.
  • Inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.
  • Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks.
Check Stock

Traxxas Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Assembly) (2)

  • Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer.
  • The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.
  • U-joint pins are held captive so you never have to worry about losing a pin.
  • Gleaming nickel-plated shafts and black silicone boots add a custom look.
  • Rear axles for 1/10 4x4 Slash, Rally, and 4x4 Stampede models.
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

Groz PROLUBE Needle Nose Grease Dispenser | 1-1/2-Inch Adaptor Length | Max Pressure up to 6,000 PSI | for use with Hand Operated Grease Guns (44861)

  • PRECISE: For dispensing a fine line of grease, ideal for lubricating constant velocity joints.
  • LONGER REACH: Allows to contact flush on hard-to-reach hydraulic fittings in inaccessible areas.
  • MORE GREASE: With max pressure of 6,000 PSI.
  • SIMPLE TO USE: Can be attached directly to steel extensions or flexible hoses.
  • PREMIUM QUALITY: Length 1-1/2 inches, diameter 0.156 inches, tip diameter 0.059 inches.
Check Stock

Midi Controller lotmusic Worlde TUNA PANDA MINI 25 Keys Portable USB Midi Keyboard with 8 RGB Backlit Colorful Drum Beat

  • Plug and Play: Drive free and hot-plug supported, adaptable to USB 2.0 interface(FULL SPEED). Supports Multiple Systems, compatible with Windows 7 and....
  • Meet Your Needs: 25 keys with velocity assignable to controllers, with 3 velocity curve and one constant velocity.
  • Bigger Beat Pad: 8 RGB backlit pads with high quality velocity & pressure sensitive performance can be assigned easily as pads, MIDI CC buttons or....
  • Changeable colours: 7 different colors are available. Hold CC MODE and OCTAVE DOWN or OCTAVE UP to select the backlit RGB color of 8 pads. The pads....
  • All you get: 1x MIDI Controller, 1x USB Cable, 1x Velvet bag and 1x Instruction. Please feel free to contact us if there is any problem with our....
Check Stock

OMT Inner CV Axle Puller Tool Set with 5/8"-18 Slide Hammer & Adapter | Inner CV Joint Removal Tool Kit | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021

  • ...The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch.
  • QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched.
  • BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependable service for the long haul.
  • heat treated and blackened or chrome plated, each part offers superior durability and corrosion resistance for long use.
Check Stock

Heavy Duty CV Boot Clamp Pliers Joint Tool Ear-Type Clamp Crimping Removal with a 1/2' Torque Wrench Universal Fit VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles

  • The CV Boot Clamp Pliers Tool is perfect Tool for Ear-Type Clamp Crimping or Removal on VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps..
  • Constructed from heavy-duty steel with comfort grip handles.
  • Perfect fit all ear-type clamps including GM FWD outboard CV joints, also suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems..
  • Equipped a "straight" crimper pliers on the end allows this CV Boot crimping on clamp ears to greatly prevent leakage..
  • Easily crimp the loop and then push down on the crimp to lock into place. 1/2" square holes allow you to use with a 1/2" extension handle or torque wrench..
  • 100% MONEY BACK GUARANTEE. Buy with no risk..
Check Stock

Midi Controller,25 Keys USB Midi Keyboard Controller with 8 Drum Pad Beat Maker，LIEKE PANDA MINI

  • Portable USB midi keyboard controller,Suitable for Music Production and Beat Production.Capture your musical inspiration anytime, anywhere. No driver required, plug and play.compatible with Windows 7 and more, Mac and iOS.(Note: the controller is music production equipment itself can not be pronounced, you need to connect to the computer and select our controller model in the MIDI Settings of music production software to work properly).
  • Designed for beginners：25 keys with velocity assignable to controllers, with 3 velocity curve and one constant velocity. 4 assignable control knobs, 4 assignable control sliders and 4 banks for different settings. 8 control buttons: CC Mod, Mod, Bank, Program, Pitch down / Pitch up, Octave down / Octave up..
  • 8 Trigger pads with velocity and assignable to controllers.Use the software editor to select the backlit RGB color of 8 pads..
  • Best choice for music lovers:Our midi controllers are easy to use, so you can easily create your own music and realize your musical dreams..
  • Package Includes:1*MIDI Controller,1* USB Cable, 1*Instruction..
Check Stock