Reviews Connector Battery Clip

10 Pack 9V Battery Clip Connector, T Type Faux Leather Long Cable Housing Connection

  • Proper design: these 9 Volt battery clip connectors are designed simply with bare ends, which is convenient to install to replace a broken battery connector on your electronic device without applying wire strippers.
  • Application: you can apply these connector clips for power supplies or other devices.
  • They also can serve for DIY battery holders with the same battery clip connectors, and great for LED strip lights or Arduino.
  • Good material: the battery connectors adopt sturdy plastic housing and metal material, which plays a useful protective role, and allows the item not to break easily.
  • Simple operation: compact size, ideal replacements for replacing your old or damaged ones..
  • Package: includes totally 10 pack 9 Volt battery clip connector buckles.
Check Stock

uxcell 3pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Long

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 10pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Length

  • Package Content: 10pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 7pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 7pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 3pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 10pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Long

  • Package Content: 10pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 14pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 14pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

9V Battery Connector,10 PCS T-Type 9 Volt Battery Buckle Connector Hard Buckle Plastic Shell Used in Student Experiment,or Other Equipment with 9V Battery T-Type 10PCS

  • GOOD QUALITY: The hard shell battery button connector is made of solid plastic and metal. The solid plastic is solid and not easy to break. The metal....
  • SIMPLE OPERATION: the 9v clip connector design is simple, and the battery connector on the damaged or old electronic device can be easily replaced.
  • WIDE RANGE OF APPLICATIONS: This 9 Volt battery clip is widely used to replace damaged battery connectors on electronic equipment, LED light bars or....
  • QUANTITY AND SIZE: Comes with 10 9V battery connectors (not including 9 V battery).
  • Cable length: about 15 cm/5.9 in, battery button length: 0.94 in....
  • REMINDER:These 9v battery clip are only suitable for 9 V batteries, please make sure of this before purchasing, do not use it when your hands are wet.
Check Stock

SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging

  • Lithium Battery Meter: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell..
  • Internal Resistance Meter: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them..
  • This charger and the battery should be put on a heat-resistant, noninflammable and nonconductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area..
  • Genuine, Authentic, Original iMax B6 Mini Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity..
  • Package Contains: 1x SKYRC B6 mini Charger.
  • 1x T Plug with Banana connector Charging Cable.
  • 1x DC Cable with Alligator Clip Charging Connector.
  • 1x T Plug with Alligator Clip connector Charging Cable.
  • 1x T Plug with Futaba connector Charging Cable.
  • 1x T Plug with JST connector Charging Cable.
  • 1x T Plug with XT60 connector Charging Cable.
Check Stock

20 Pack 9 V Battery Clip Connector Long Cable Connection Hard Shell Black Red Connector (I Type)

  • Good quality: these hard shell connector cables are better than some usual flimsy vinyl found on 9 V battery connectors, plays a useful protective role, and not easy to break.
  • Good conductivity, good contact performance, without risk of electric leakage.
  • Install easily: simple design with a compact size and bare ends which are both easy to be installed for replacing your old or damaged one, good replacement or as standby.
  • Suitable application: replace a broken battery connector on your electronic device, good to use for LED strip light or science experiment.
  • Quantity and size: come with 20 pack 9 V battery clip connector (9 V battery is not included).
  • Warm notice: this battery clip can be applied for power supplies or other devices with a 9 V battery, please do not apply them when your hands are wet.
Check Stock

Yoodelife 9V Battery Clip Connector 9 Volt Long Cable Connection Soft Shell I Type Black 5 Pack

  • Proper design: these 9 volt battery clip connectors are designed simply with bare ends, which is convenient to install to replace a broken battery....
  • Application: you can apply these connector clips for power supplies or other devices.
  • They also can serve for DIY battery holders with the same....
  • Good material: the battery connectors adopt sturdy plastic housing and metal material, which plays a useful protective role, and allows the item not....
  • Simple operation: compact size, ideal replacements for replacing your old or damaged ones..
  • Package: includes totally 5 pack 9 volt battery clip connector buckles.
  • cable length: Approx. 15 cm/ 5. 9 inches.
Check Stock

Battery Case Holder with Lead Wire Bundle,6PCS 9 V Battery Clip Connector T-Type 9 Volt Battery Clip with 2.1 x 5.5 mm Male DC Power Plug for 9V Battery Connector for Arduino DIY

  • Pure Copper Cord: 24awg UL Pigtail Cables(black),Holder Type: T-type Terminal with Leather Shell,Super Tight Snap Head..
  • 9V battery clip connector T-type with 2.1 x 5.5 mm male dc power plug for arduino diy..
  • The 9v battery clip connector is made of solid plastic and metal, which is not easy to break and has good contact performance, without risk of electric leakage..
  • Each 2.4 x 1.2 x 0.7cm, 9V battery clip connectors with 2.1 x 5.5 mm male dc power plug (not including 9 V batteries)..
  • This 9 volt battery clip t-type with 2.1 x 5.5 mm male dc power plug is widely used in student experiment, LED strip lights, or arduino or other devices with a 9V battery..
Check Stock

WMYCONGCONG 70 PCS Mixed Color 12V DC 5mm LED Pre Wired 20cm Bulb Lamp w/ 20 PCS 5mm Light Emitting Diode LED Holder w/ 10 PCS 9V Battery Clip Connector

  • Pre-wired with built in resistor, soldered well and heatshrinked, ideal for hobbyists, RC car, boat, custom builds, DIY Car Boat Toys Parties and multiply lighting projects etc..
  • 5mm metal LED holders, secure to hold LED firmly.
  • 9V wired battery clip connector, great replacement for a broken battery connector on your electronic device..
  • Color: red, green, white, yellow, blue, quick flashing and slow falshing..
  • Operational voltage range: DC 2v-12v. 2v very dim, 12v very bright..
  • Package Content: 70pcs 5mm LED pre wired light(10pcs each color) + 20 pcs 5mm LED Lamp Holder + 10 pcs Battery Clip Connector..
Check Stock