Reviews Connection Nut

Victor 0381-1928 CA 2460+ Cutting Attachment, 90° Head

  • Improved head durability, preheat control valve flow and reduced user fatigue due to improved balance.
  • Improved access and reparability of mixer with single nut removal.
  • Superior cutting oxygen valve with improved feathering/ease-on control.
  • No wrench flats on connection nut indicates hand tightening only for safer operation.
  • Internal connection snap ring prevents coupling nut sliding and exposure to o-rings for reduced damage.
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Tee Equal Diameter 316 Good Sealing Compression Ferrule Connector Tee for Solar Energy for Chemical Industry for Complicated Pipeline(Ф8)

  • 【Advantage】 Relatively common national standard connector double ferrule straight‑through connector, acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • 【Application】 Suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • 【Structure】 Compression ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • 【Good Sealing Perfomance】 When the ferrule and the nut are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • 【Reusable】 Ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble. Break the traditional installation method..
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф8)

  • ♥【Simple Connection】 The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance..
  • ♥【Application】Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • ♥【Structure】The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
  • ♥【Method】 When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing..
  • ♥【Easy To Operate】 Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
Check Stock

The Hillman Group 59445 5/16-18 - Nylon Wing Nut 8-Pack

  • This Nut Has A Wing On Each Side That Helps You To Tighten The Nut Without Tools.
  • Wing Nuts Can Be Used Where Frequent Fastener Connection Adjustments Or Removals Are Needed And Can Be Made Quickly And Often.
Check Stock

The Hillman Group 2570 10-24 Wing Nut Nylon 10-Pack

  • This Nut Has A Wing On Each Side That Helps You To Tighten The Nut Without Tools.
  • Wing Nuts Can Be Used Where Frequent Fastener Connection Adjustments Or Removals Are Needed And Can Be Made Quickly And Often.
Check Stock

The Hillman Group 4349 10-32 Brass Wing Nut 15-Pack

  • This Nut Has A Wing On Each Side That Helps You To Tighten The Nut Without Tools.
  • Wing Nuts Can Be Used Where Frequent Fastener Connection Adjustments Or Removals Are Needed And Can Be Made Quickly And Often.
Check Stock

The Hillman Group 4348 8-32 Brass Wing Nut 15-Pack

  • This Nut Has A Wing On Each Side That Helps You To Tighten The Nut Without Tools.
  • Wing Nuts Can Be Used Where Frequent Fastener Connection Adjustments Or Removals Are Needed And Can Be Made Quickly And Often.
Check Stock

Yinpecly M8 4 Pronged Tee Nut Fully Threaded T-Nut Carbon Steel Zinc Plated Fastener for Wood Rock Climbing Wall Holds Plywood Furniture Particle Board CNC Router Silver Tone 100pcs

  • 【MATERIAL】- Made of high-quality carbon steel material, high hardness, long service life, galvanized surface, with good anti-rust performance and better performance.
  • 【APPLICATION】- Commonly used for wood products or artificial wood, plywood, particleboard, etc, with a good connection, fastening performance, and high strength.
  • 【ADVANTAGE】- The nuts are made of carbon steel, well-made and precisely machined.
  • They are very suitable for use in wood and humid environments.
  • They are strong and corrosion-resistant, easy to install, which are ideal for your work.
  • 【INSTALLATION】- First make a hole according to the outer diameter of the rod, insert the outer rod of the nut into the hole, hit the bottom of the anti-claw nut flange with a hammer, let the 4 claws penetrate the wood, a stable and strong nut connection is realized.
Check Stock

Aicosineg M4 4 Pronged Tee Nut Fully Threaded T-Nut Carbon Steel Zinc Plated Fastener for Furniture Climbing Wall Wood Rock CNC Router Holds Plywood Particle Board Silver Tone 50pcs

  • 【MATERIAL】- Made of high-quality carbon steel material, high hardness, long service life, galvanized surface, with good anti-rust performance and better performance.
  • 【ADVANTAGE】- The nuts are made of carbon steel, well-made and precisely machined.
  • They are very suitable for use in wood and humid environments.
  • They are strong and corrosion-resistant, easy to install, which are ideal for your work.
  • 【INSTALLATION】- First make a hole according to the outer diameter of the rod, insert the outer rod of the nut into the hole, hit the bottom of the anti-claw nut flange with a hammer, let the 4 claws penetrate the wood, a stable and strong nut connection is realized.
  • 【APPLICATION】- Commonly used for wood products or artificial wood, plywood, particleboard, etc, with a good connection, fastening performance, and high strength.
Check Stock

[2pcs of Pack] 400mm 8mm T8 Stainless Steel Threaded Rod Lead Screw for 3D Printer Machine Z Axis

  • ★Diameter: 8mm, Screw thread: 2mm Pitch 8mm Lead (4-heads, turn the nut one circle, front the screw 8mm).
  • ★Function:The Screw nuts ensure safe and precise clearance adjustment , recessed screw holes, featuring non-protruding.
  • ★Features:The anti backlash nut retainer has high precision and zero repeatability or tilt repeatability.
  • ★Install:Easy and quick installation, Internal thread connection.
  • ★Application Scope: Suit for 3D printers Ender 3 anti backlash nut and CNC.
Check Stock

The Hillman Group 3001 1/4-20-Inch Stainless Steel Wing Nut 5-Pack

  • This nut has a wing on each side that helps you to tighten the nut without tools.
  • Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often.
Check Stock

The Hillman Group 830008 5/16 by 18-Inch Stainless Steel Wing Nut 50-Pack

  • This Nut Has A Wing On Each Side That Helps You To Tighten The Nut Without Tools.
  • Wing Nuts Can Be Used Where Frequent Fastener Connection Adjustments Or Removals Are Needed And Can Be Made Quickly And Often.
Check Stock