Reviews Connecting Rod End Bush

DONSP1986 PK80 Motor Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc.
  • better adjusting Clutch a little before riding.
  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set with AF80 connecting rod.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

H-Beam Connecting Rods for Toyota Supra MK4 2JZ-GE 2JZ-GTE 2JZ

  • Double honed bearing surfaces provide absolute reliability at high RPM.
  • Increased wrist pin lubrication with double drilled small end.
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication.
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes.
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

DOSMAMZ Tactical 1/2 x 5 Ferrocerium Ferro Rods Flint Fire Starter Magnesium Fire Steel Rod Perfect to DIY Your own Emergency Tool Kit

  • >COMPACT & LIGHTWEIGHT: the ferro rod is 1/2" x 5" and weights 3.5 oz. More reliable than matches or lighter, this fires tarter is easier to strike....
  • > ESSENTIAL FOR OUTDOOR ACTIVITIES: perfect emergency fire starter for Bush-craft, Hiking, Camping, Hunting, Fishing, EDC, Emergency, BBQ, Gas Camp....
  • >RELIABLE: The ferro rods is made from Iron, Magnesium and a rare earth metals called Misch-metal, an alloy that produces sparks when be strike..
  • >STARTING FIRE EASILY: The 1/2" thick ferrocerium rod will ignite a 5,500º F shower of sparks at any altitude, in any weather condition - rain,....
  • >DIY YOUR OWN EMERGENCY KIT: you can add a wood hand, circle the paracord on one end of the rod, or just put in your backbag as a fire stater..
Check Stock

maXpeedingrods Connecting Rods 1.8T Engine for VW Golf MK4 Passat for Audi A3 A4 A6 TT with 5/16\ ARP 2000 Bolts 19mm (Tapered Small End)

  • Fit for Audi A3 8L1 1996-2003 1.8T, for Audi A4 B5 1994-2001 1.8T, for Audi A4 B6 2000-2004 1.8T.
  • Fit for Audi A6 C5 1997-2005 1.8T, for VW Golf MK IV 1997-2006 1.8T, for VW Passat 3B5 1997-2000 Estate 1.8 T.
  • Material: 4340 EN24 H-Beam Connecting Rod.
  • Dimensions: Center to center length: 144mm/5.67" Big end diameter: 50.6mm/1.992" Small end diameter: 19mm /0.748"( tapered small end) Big end width: 19.9mm /0.784" Small end width: 19.9mm/0.784".
  • Package Contents: 4 Pieces of H-Beam Connecting Rods.
  • 8 Pieces of ARP 2000 5/16" Bolts (Note: Extra cost for upgrading to ARP L19 bolts).
Check Stock

BTSHUB Silent Bearing Puller Kit Dent Puller Set, Differential Rear Axle Bush Tools Mount Bushing Kit for BMW E36/46, E38/39, E60/61, E31,E90/91

  • DIFFERENTIAL & AXLE BUSH TOOLS: This axle bush tool set is ideal for removing and installing ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series..
  • APPICATION: Suitable for vehicles from BMW, 1 Series models, for example, E81, E87.
  • 3 Series E36, E46, E83, E90, E91, E92, E93.
  • 8 Series models E31, E85 Z4 models, E86, and S R53 model.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY:Made of heavy-duty alloy construction, which has high hardness and good toughness. High quality and designed for long life in daily workshop use.
  • FEATURES: Including differential and axle bush tools, this is a comprehensive kit to renew the ball joints and bearings in the rear wheel carrier, longitudinal arms and rear axle, etc. A 8.9" feed rod for actuating the Silent bearing inserts with thread M12 x 0.06" long, at the end of the spindle with thread M12 x 0.06" short.
  • EASY FOR STOREAGE: Comes with a premium well-organized box for easy storage and transport. All thread repai....
Check Stock

Mophorn Wood Vise 9 Inch Woodworking Vise, Heavy-Duty Steel and Cast Iron Workbench Vise, Easy-to-operate Front Vise, Durable Woodworking Bench Vise for Home, Woodworking Studios, Teaching Equipment

  • Professional Use & 9 Inch: This woodworking bench vise is easy to operate. Adjust the jaws to the appropriate opening and turn the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product. Jaw Width: 226 mm/9"..
  • Convenient Design: You can easily mount this woodworking vise to your workbench. The 9-inch guide bar makes it easy to work and holds things more firmly. Two screws are added to the connecting rod to avoid the non stripping..
  • Solid Construction: The woodwork vise has an iron and steel structure with paint coating. The connecting rod is cruder and longer, and the lead screw and the connecting rod are chrome-plated, rust-proof, and corrosion proof..
  • Long Service Life: This wood vice for workbench features a solid frame, durable for long-term use. It is designed with an non off retaining ring. The wood front vise is compact and lightweight for easy carry, use, and storage..
  • Wide Application: The professional-grade woodworking face vise is designed for medium-duty home, shop, or professional use. These end vises are built to exact specifications for optimal performance..
Check Stock

40 Sets Furniture Board Cam Fitting with Dowel and Pre-Inserted Nut, 3 in 1 Cam Lock Nuts for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting (Dowel M6x36mm, Cam Fitting ¢15x13mm)

  • [SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
  • [MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
  • [APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
  • [EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
Check Stock

The Hillman Group 44824 3/8-16 x 3-Inch Threaded Rod, 5-Pack

  • Designed for hanging, connecting, clamping, and support for plumbing, heating and electrical applications and other do-it-yourself projects.
  • Threaded rods may have a drive slot in one end to facilitate installing the stud.
  • The rod features steel construction and they are designed to be used where tension is expected.
Check Stock

Allstar ALL96478 Engine Connecting Rod and Piston Holder , Black

  • Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
  • This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
  • Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
  • Assembly is required and can also be disassembled if desired after use for easy storage.
Check Stock

The Hillman Group 44835 7/16-14 x 6-Inch Threaded Rod, 5-Pack

  • Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
  • Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
  • The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check Stock

The Hillman Group 44826 1/4-20 x 6-Inch Threaded Rod, 8-Pack

  • Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
  • Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
  • The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check Stock

The Hillman Group 44822 1/4-20 x 3-Inch Threaded Rod, 8-Pack

  • Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
  • Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
  • The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check Stock