Reviews Conical Test Tube

Honbay 10PCS 50ml Plastic Centrifuge Tube Laboratory Tube - Orange Screw Cap, Round Bottom, Graduated Marks

  • ...bes to prevent sample leakage. The plastic centrifuge tubes also include a white writing area for easy marking and identification..
  • GREAT VALUE FOR MONEY - The surface of the inner wall is smooth and there is no residual solution. The 4 test tube racks are convenient for storing your samples. You will obtain 200 PCS conical centrifuge tubes to meet your various experimental needs. The capacity of the centrifuge tubes is 15 ml. The size of the test tube rack is 10 x 4.4 x 2.5 inches..
  • WIDE RANGE OF APPLICATIONS - The 15 ml centrifuge tubes are very suitable for hospitals, scientific laboratories, schools, epidemic prevention stations, preclinical research, separation and preparation of biological samples, biochemistry and more..
  • 30-DAY RETURN SERVICE - We will answer product questions and after-sales questions for you within 24 hours. If you are not satisfied with the plastic centrifuge tubes for any reason, you will get a full refund. We promise a 30-day money-back guarantee, completely risk-free..
Check Stock

4 Way Plastic Test Tube Rack (Blue)

  • Multiple racks can be combined end by end or side by side together to meet your experimental requirements.
  • Autoclavable；Color: Blue/ Green/Orange / Yellow/ White.
  • Each rack can hold different sized tubes on each side003c/p003e003cbr003e 003cp003eSide 1 ( Φ=2.9cm, 4 - 50mL tubes)003c/p003e003cbr003e 003cp003eSide 2 (Φ=1.7cm, 12 - 15mL conical tubes)003c/p003e003cbr003e 003cp003eSide 3 (Φ=1.2cm, 32 - 1.5/2.0mL tubes) 003c/p003e003cbr003e 003cp003eSide 4 (Φ=0.8cm, 32 - 0.5mL microtubes).
Check Stock

Ackers Conical Centrifuge Tubes 15mL 100Pcs Sterile Plastic Test Tubes with Screw Caps Polypropylene Container with Graduated and Write-on Spot Non-Pyrogenic DN/RNase Free | 2 Test Tube Racks

  • 15ml conical centrifuge tube, made of high-purity PP material, maximum RCF: 9,400, can be autoclaved at 122℃, can be frozen to -80℃.
  • Longer screw cap, used to prevent sample leakage, smooth and flat inner surface, no residual solution.
  • 2 test tube racks of size 254mm×113mm×62mm, 50 holes, 16mm diameter, which can meet your various experimental needs.
  • The easy-to-read scale is accurate to ±2% in increments of 1mL, With a large, hard-to-matte white printing and writing area to make the mark clear and easy to read, the scale and writing area are resistant to chloroform.
Check Stock

Eppendorf 022628012 5702R Centrifuge with 4 x 85ml Swing-Bucket Rotor, 13 & 16mm Blood Tube Adapters, 120V

  • Fixed-angle conical tube rotor with lid and maximum rotational speed of 7,830 RPM or relative centrifugal force (rcf) of 7,197 x g.
  • 6-place array accommodates 6 x 15mL or 6 x 50 mL conical tubes.
  • Adapters included for 15 mL and 50 mL conical tubes.
  • Plastic lid included for basic applications.
  • For use with Eppendorf microcentrifuge model 5430 or 5430 R (sold separately).
Check Stock

Kesell 10ml High-Speed Centrifuge Tube Conical Bottom Orange Screw Cap with Clear Graduation and Writing Area, Pack of 20

  • 10ml Conical bottom centrifuge tube with high purity PP Material, with clear graduated and screw cover, Markable blank area..
  • The set includes 20pcs centrifuge tubes. They're simple to fill and the lids fit tight, no leaks..
  • Smooth products, good transparency, accurate measurement scale, the lid elastic appropriate to high-speed centrifugal..
  • Polypropylene centrifuge tubes have the advantage of being transparent or translucent. They have a low hardness and can be removed by puncture..
  • 10ml Conical Centrifuge Tube are widely used in laboratories for multiple purposes, from storage of samples to high speed centrifugation..
Check Stock

Four E's Scientific Mini Dry Bath Incubator with 15 x 1.5ml Heating Block, LED Display, High Temperature Precision, Timing Control for Laboratory

  • 【PreciseTemperature Control】The temperature of this Mini Lab Dry Bath Incubator Heater is up to 100°C and the temperature control accuracy is ±0.5°C,display accuracy ±0.1°C. Room temperature to 100°C in less than 15 minutes..
  • 【5 Program Setups】The system can save 5 sets of programs of the temperature and time,0~99h59min.When Mini Digital Dry Bath Incubator with Heating Lid is powered on but not when working, short press the button of “Prog.” to select the 5 default programs from P1 to P5.Program for quick operation..
  • 【More Efficient】Our Mini Digital Dry Bath Incubator with Lid,which is provides quicker heating and higher heating efficiency.The transparent cover can also better observe the progress of the test..
  • 【Heating Block】Including 15x1.5mL Heating Block x 1,hole diameter is Φ10.8mm/0.43inch,the hole depth is 37mm/1.46inch.Suitable for 1.5ml conical centrifuge tube.Snuggly holds the test tubes enabling precise and uniform heating..
  • 【LED Display】This Heating Dry Bath Incubator has Intuitive LED digital display, easy to operate.Low operation voltage (12v)..
Check Stock

ARES 15044-32-Piece Cooling System Leakage Tester and Vacuum Refill Kit - Easily Test for Leaks in Cooling System - Change Coolant Quickly

  • SET INCLUDES: This Cooling System Leakage Tester and Vacuum Refill Kit includes a cooling system pressure pump with a nylon tube and gauge, a vacuum pump and refill apparatus, a black radiator cap tester, a blue radiator cap tester, a 90-degree pressure pump connector, a thermometer, a radiator test cap wrench, a conical rubber adapter, a coolant hose, a drain hose, and 22 test caps (No. 3 - No. 24) that cover a wide range of vehicles. Please see product manual for full compatibility details..
  • DESIGN CONSIDERATIONS: This set is designed to let you quickly and easily test for leaks in your cooling system. With the blue and black connectors, you can even pressure test your radiator caps. The vacuum pump and refill apparatus makes it simple to connect to your shop air supply, so you can refill coolant faster than time-consuming air-bleeding. The 90-degree connector allows you to work on recovery tanks located deep in the engine compartment..
  • QUALITY YOU NEED: Our Cooling System Leakage Tester and Vacuum Refill Kit makes it easy to test for leaks and refill coolant on nearly any vehicle. With added safety features, like its included thermometer and pressure release valve, you'll be able to work with confidence. Thanks to nylon construction this set is ligh....
Check Stock

DEPEPE 60pcs Plastic Test Tubes with Rack and Caps, 16 x 100mm Clear Test Tubes with Holder for Scientific Experiments, Beads Liquid Spice Seed Storage, Party Decorations

  • Super-Value Pack: Package contains 60pcs 16 x 100mm clear plastic tubes with caps and a 60-hole test tube rack. Capacity of each test tube is 13ml..
  • Product material: The test tube is made of transparent polystyrene (PS) plastic, non-toxic, safe, high quality, durable and not easy to break..
  • With test tube cap: The cap can be closely attached to the 16mm diameter test tube, enabling good sealing performance and can effectively prevent liquid leakage..
  • Removable test tube rack: A 60-hole test tube rack, suitable for storing 16mm-diameter test tubes. The test tube rack is divided into 3 parts and very easy to be assembled. When you don't need to use the test tube rack, just dissemble and the parts take up very little space..
  • Wide range of uses: Test tubes can meet the needs of daily scientific testing, also good as a perfect storage container for storing diamond art beads, spices, liquids, seed, sample. Test tubes with holder can also be used for mixing drinks, etc., to decorate Halloween or various theme parties..
Check Stock

6 Pack Plastic Test Tube Rack for 15-18 mm Tubes, 40 Holes Test Tube Rack Holder, Science Test Tube Stand, Lab Tube Rack for for Scientific Experiment, Lab Sample Vials, Laboratory (Detachable)

  • Package Content: You will get valued 6 pack 10 x 4.3 x 2.6 inch (L x W x H) lab test tube bracket holders with 40 holes, and the hole diameter measures 18mm/0.71”which suitable for test tubes with an OD ranging from 15 to 18 mm.
  • Wide Application: The test tube rack set are perfect for scientific experiment, holding test tube.
  • You can also apply the test tube holder rack for making homemade chapsticks, storing ink samples, lip balm, candy storage or party decor.
  • Quality Material: The lab tube rack made of lab grade polystyrene, durable and lightweight.
  • The detachable plastic test tube rack allows easy to carry.
  • Detachable Test Tube Rack: Our plastic test tube organizer adopt detachable, removable design allows better store and doesn't take up much space.
  • These detachable test tube stand ideal for storing and holding seed beads, allow you to find what you need quickly.
  • Easy to Assemble: The plastic test tube holder has 3 layer and each layer has a direction, just slide the shelves in from one side and the other side has a lip that stops it.
  • The clear test tube rack has three layers of holes with a smallest hole at the bottom to keep tubes steady.
Check Stock

Auniwaig 1000 Pieces Centrifuge Tube 0.1ml Conical Centrifuge Tubes with Leak-Proof Cap, Micro Test Tubes Clear Conical Microtube Plastic Centrifuge Tube, Transparent Test Sample Tubes for Lab

  • Capacity：The capacity fo centrifuge is 0.1ml.
  • These conical centrifuge tube is super clear and light weight plastic vials tubes..
  • Suitable for samples,test,craft use,etc..
  • High Quality: These 0.1ml centrifuge tubes are made of high purity PP material. They are designed to have leak-proof caps with sealing rings to prevent leakage..
  • Wide Application: Our plastic centrifuge tubes are general used in fields of biochemistry and molecular biology，such as separation and preparation of various biological samples..
Check Stock

Conical Centrifuge Tube - Eisco Labs Borosilicate Glass - 15ml, 120mm x 17 (OD) mm - Pack of 12

  • Twelve glass conical centrifuge tubes with 17mm diameter and 15ml capacity.
  • Tubes are ideal for centrifugation as well as sample storage and culture growth.
  • Conical shape encourages material mixing within tube.
  • Economic package size can fill classroom needs effectively.
  • Appropriate in professional and home lab settings.
Check Stock

Ackers Conical Centrifuge Tubes 15mL, 100 Pcs Sterile Plastic Test Tubes with Screw Caps, Polypropylene Container with Graduated and Write-on Spot, Non-Pyrogenic, DN/RNase Free

  • 15ml conical centrifuge tube, made of high-purity PP material, maximum RCF: 9,400, can be autoclaved at 122℃, can be frozen to -80℃.
  • Longer screw cap, used to prevent sample leakage, smooth and flat inner surface, no residual solution.
  • The PP conical centrifuge tube is sterilized by gamma radiation or EO.
  • The easy-to-read scale is accurate to ±2% in increments of 1mL.
  • With a large, hard-to-matte white printing and writing area to make the mark clear and easy to read, the scale and writing area are resistant to chloroform.
Check Stock

5Pcs/Set Spring Test Tube Steel Clip Clamp Holder Testing Tube Holder Laboratory Experiment Tool Length 14.5cm / 5.7in

  • ☛ Test Tube Holder -- Made of high quality steel, durable to use, quality plated steel wire test tube holder..
  • ☛ Spring Tube Clip -- Exquisite workmanship, not easy to rust, spring-action self-closing mechanism..
  • ☛ Fit For Diameter -- The maximum diameter test tube that can hold is less than 5cm,.
  • ☛ Hand Protection -- It can protect your hand when doing a experiment, used to hold test tubes..
  • ☛ Holding Test Tube -- Used for holding test tube in the laboratory, when they are hot and untouchable..
Check Stock