Reviews Conformal Coating Inductor

MG Chemicals 419D Acrylic Conformal Coating, Clear Finish, 12 oz. Aerosol

  • Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.
  • It protects and insulates electrical and electronic components and assemblies, including generators, motors, transformers, relays, and solenoid coils.
  • For spraying, liquid can be thinned using M.G. Thinner Cleaner.
  • Thin up to one half part thinner to one part coating.
Check Stock

Horinker 10pcs SF240E Organic Thermal Sensitive Pellet Type 250V 10A 240 Degrees

  • * Wide inductance range,high current capability low magnetic leakage..
  • * High-reliability leaded inductor low-resistance leaded inductor..
  • * Axial leaded power inductor radial leaded power inductor UL-polyolefin shrinking tubing leaded inductor..
  • *Package Content: 1Pcs x Inductance Coil.
  • Overall Size: 13 x 29mm / 0.51" x 1.14 (T*D).
Check Stock

General Electric 15D21G002 Magnetic Coil, 115-120V, Nema Sz 00, 0, 1

  • * Wide inductance range,high current capability low magnetic leakage..
  • * High-reliability leaded inductor low-resistance leaded inductor..
  • * Axial leaded power inductor radial leaded power inductor UL-polyolefin shrinking tubing leaded inductor..
  • *Package Content: 10Pcs x Inductance Coil.
  • Overall Size: 7 x 18mm / 0.28" x 0.71" (T*D).
Check Stock

uxcell 10Pcs Vertical Toroid Magnetic Inductor Monolayer Wire Wind Wound 10mH 3A Inductance Coil

  • * Wide inductance range,high current capability low magnetic leakage..
  • * High-reliability leaded inductor low-resistance leaded inductor..
  • * Axial leaded power inductor radial leaded power inductor UL-polyolefin shrinking tubing leaded inductor..
  • *Package Content: 10Pcs x Inductance Coil.
  • Overall Size: 8 x 19.8mm / 0.31" x 0.78" (T*D).
Check Stock

MG Chemicals 4223-55ML Urethane Conformal Coating, 55 ml Bottle

  • 419C Acrylic Conformal Coating is an IPC 830 certified, fast drying, xylene and toluene free product that provides an excellent finish.
  • It is easy to use and does not require special or costly equipment to apply.
  • It is ideal for high moisture environments and applications requiring easy repair and rework.
  • The 419C coating protects electric circuit against moisture, dirt, dust, thermal shocks, and scratches that could corrode, short circuit, or otherwise damage the electric component.
  • It insulate against high-voltage arcing, shorts and static discharges.
  • this coating provides high dielectric withstand voltage allows traces to be put closer together helping with miniaturization.
Check Stock

uxcell 50Pcs 0510 Color Ring Inductor 33uH 1W Axial RF Choke Coil Inductor

  • USER-FRIENDLY:More user-friendly, it can be distinguished via the recognition value and the five color wheels..
  • HIGH PERFORMANCE:Working as the 1/4W metal film inductor set, this experimental inductor set is for high performance according to strict rule..
  • HIGH QUALITY MATERIALS:The inductor is made with high quality materials, it has stable performance and has long serving life..
  • SET INCLUDES:This product includes 12 general inductance values(1UH, 10UH, 22UH, 33UH, 47UH, 100UH, 150UH, 220UH, 330UH, 470UH, 560UH, 1MH), there are 10PCs for each value..
  • WIDE RANGE OF APPLICATIONS:This inductor is especially suitable for various electrical and experimental projects such as for Arduino, breadboards, general-purpose boards, and circuits..
Check Stock

MB Quart NW1-254W Nautic Marine Subwoofer (White) - 10 Inch Subwoofer, Marine Certified

  • ...0" 600 Watt Shallow Marine Subwoofer, RMS Power Handling: 300 Watts, Peak Power Handling: 600 Watts, Minimum Impedance: 4 Ohms, Sensitivity: 82 dB, Mounting Diameter: 9.05" inches, Outside Diameter: 10.72" inches, Mounting Depth: 2.83" inches, Mounting Height with Grill & Gasket: 4.65" inches.
  • Certifications: IPX67, Conformal Coated, UVA Certified, CEA426B, Marine Certified: IP67 Rating. Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand, Shallow Mount/Low Profile: Designed to fit in less than 3" of depth. Ideal for sealed enclosures.
  • Water Resistant Spider: Woven red aramid fiber composite spider to stabilize the cone and voice coil in all musical situations. Armid fibers do not degrade over time and are not susceptible to temperature swings, 10" Composite Injection Molded Poly Cone: UVA Protected, water resistant composite polypropylene cone with NBR rubber surround mounted on a lightweight Fiber Reinforced Composite Frame.
  • High Temperature Voice Coil and Former: Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.
Check Stock

1 gal Rust-Oleum Brands 292514 Clear EpoxyShield Premium Clear Coating

  • No hazardous air pollutants — free of toluene and xylene.
  • Excellent finish — smooth, homogeneous, and durable crystal Clear coat and easy to inspect — fluoresces under black light (UV light).
  • Protects electronics from moisture, corrosion and static discharges.
  • Easy rework and repairs — can solder through coat or remove with MG Chemicals' thinner/cleaner, thinner 4, or conformal coating stripper.
Check Stock

SFB-7900D - Sundown Audio Monoblock Class-D Amplifier

  • Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.
Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

EDWARDS GS 6513-18A Signal Module 120V-AC

  • Has good low temperature resistance, superior insulation, moisture, leakage, shock, corrosion, anti-aging and other properties..
  • Conformal coating is used to protect circuit boards and related equipment from environmental erosion..
  • Photoelectric isolation against high frequency interference, suitable for a wider environment, protect equipment, and not affect the temperature of the working environment..
  • High-quality ABS material shell, high temperature and impact resistance, can be used for a long time.
  • Realize the isolation of input, output, power supply and shell, strong anti-interference ability and high reliability..
Check Stock

Yetaida 130pcs CD54 SMD Power Inductor Assortment Kit, 13values 2.2uH-680uH Chip Inductors,CD54 Wire Wound Chip

  • 【13 Value CD54 SMD Power Inductors】: You will get 140 pieces of CD54 SMD Power Inductors, including 2.2UH 3.3UH 4.7UH 6.8UH 10UH 22UH 33UH 47UH 68UH 100UH 220UH 330UH 470UH 41 transparent mesh box. Sufficient quantity for your general needs..
  • 【High Quality】: The plug-in inductor is made of durable and practical ferrite core, metal material, the quality and meticulous craftsmanship can prevent the inductor from rusting. Each value is produced under strict standards that are precise and conform to their values..
  • 【Product Features】Maximum temperature range: -55℃ ~ +105℃.
  • Rated voltage: 16V, 25V, 35V, 50V (varies according to the model).
  • Maximum temperature range: -55℃ ~ + 105℃.
  • 【Easy to use】: We pack the inductor in a 15-grid plastic storage box, and put a clearly visible label on the surface of the box. The label corresponds to the inductance of the corresponding size, which is convenient and quick to use..
  • 【Wide application】CD54 wire wound chip power inductor can be widely used in buck-boost converters, monitors, computer boards, PCB boards, PCs, laptops, radios, TVs, speakers, copy smart door locks, network communication equipment, etc..
Check Stock