Reviews Conduit Riser Clamp

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

  • ... There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
  • Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
  • Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw.
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Rox Speed FX Pivot Handlebar 2' Riser 7/8'Handlebar Black 1R-P2SS

  • These universal risers work great on ATVs, dirt bikes, and motorcycles with a 7/8" bar..
  • These will also work on snowmobiles that have flat plate steering stems..
  • These risers allow you to pivot your bars forward and backward for your ultimate comfort..
  • They will clamp into 7/8" stems and clamp stock 7/8" handlebars..
  • Patented by the US Patent and Trademark Office under US Patent #6,920,806.Two inch pivoting handlebar riser for 7/8" bars.Patented pivoting riser works on any machine with 7/8" bars.Dual rotation points allow rider to select optimum riding position for co.
Check Stock

VIVO Clamp-On Universal Height Adjustable Ergonomic Computer Monitor and Laptop Riser, Tabletop Desk Stand, C-Clamp Design, STAND-V000SC

  • Universal Riser - Contemporary multi-purpose tabletop riser. Perfect for computer monitors, laptops, audio, streaming devices, and more..
  • Sturdy C-clamp - Built-in C-clamp design securely attaches to desktops 0.4” to 2” in thickness with a small footprint, maximizing your workspace. Constructed of aluminum and steel for incredible stability and supports weights up to 33 lbs..
  • Height Adjustable - Choose from adjustments between 4.8” and 6.5” to find the perfect ergonomic height for your monitor, laptop, or other desktop accessories..
  • Anti-Slip Padding - The top platform is covered with an anti-slip silicone pad that secures the held device. The bottom of the base also features padding to prevent sliding and surface scratches..
  • Easy Assembly - All hardware and instructions are provided. Riser can be assembled and ready for use in minutes..
Check Stock

Yamaha 5VUW003B0000 Fork Seal Kit

  • Package includes: A pair of front fork assembly with hydraulic oil+triple clamp handlebar riser set.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • Triple clamp made by machined from high quality aluminum alloy.
  • Fork length: 735mm (from leg top to wheel axle centre) , for 14" to 17" front wheels.
  • Please check the size of your stock front fork for compatibility.
Check Stock

Manitou Markhor Fork 26" 100mm Travel, 9mm Axle, Matte Black

  • Package includes: A pair of front fork assembly with hydraulic oil+triple clamp handlebar riser set.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • Triple clamp made by machined from high quality aluminum alloy.
  • Fork length: 735mm (from leg top to wheel axle centre) , for 14" to 17" front wheels.
  • Please check the size of your stock front fork for compatibility.
Check Stock

Bessey VAS-23+2K Vario Angle Strap Clamp (Pack of 2) (2)

  • 1️⃣[ What You Get ]: 10 x conduit clamps, which fit for 2" / 50mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 3.6" / 90mm,total length is 3.8" / 96mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 6️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 7️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 8️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicles, petroleum, chemical industry, shipbuilding and other occasions..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant sh....
Check Stock

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

DiER 2x Handlebar Riser Mount Clamps Motorcycle Dirt Bike ATV 22mm 7/8

  • Package:2x Motorcycle Handlebar Riser Mount..
  • Use for most Motocycles with 22.2mm(7/8") Handlebar Clamp..
Check Stock

ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps

  • Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
  • Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
  • Package Included: The hose removal tool includes 1 x Hose Clamp Pliers.
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Merrell mens MOAB 2 WTPF Hiking Shoe, Granite, 10 US

  • 19" front wheel assembly for pit pro trail dirt bike.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • The assembly comes complete with the front 1.6 x 19 rim, 70/100-19 knobby tire, inner tube, wheel bearings.
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order.
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake Disc + 1 x Brake Master Caliper + 1 x Rim Axle + 2 x Front Fork Assembly + 1 x Triple Clamp Handlebar Riser set.
Check Stock

Teyssor Mountain Bike Flat Handlebar 31.8mm Aluminium Alloy MTB Handlebars 720mm 780mm

  • Clamp diameter:31.8mm,Bar end diameter:22.2mm.
  • Riser:25mm,Sweep back angle:3°,Ergonomic Design for riders who need more control on the bikes.
  • Bicycle Riser Handlebar Length 720mm(28.35 inch).
  • Ultra-light Durable Material:Aluminum Alloy 6061,strong handlebars compatible with most mountain bikes and dirt bicycles.
Check Stock