Reviews Conduit Reducing Hex Couplings

Southwire - 63029840 Tools & Equipment FTSP45-75NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, 4.5mm x 75 Feet

• Works great in either filled or empty conduit.
• TWO LEADER OPTIONS: comes with either a 360° swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
• FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
• SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
• EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.

Southwire FTSP45-125NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, Two Leader Options, Spiral Extruded Polymer, Extremely Flexible, 4.5mm x 125 Feet

• Works great in either filled or empty conduit.
• TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
• FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
• SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded..

Irwin Industrial Tools 43022 1-3/8-Inch Self Feed Bit

• For drilling large diameter holes in wood for pipe, conduit and other applications.
• Replaceable coarse screw point drills quickly in dry, wet and gummy wood.
• All bits have a 7/16-Inch hex quick change impact shank that fits 1/2-Inch or larger electric drills or 7/16-Inch hex impact wrench drills.
• Precision milled shank eliminates run out and wobble.
• Forged in one piece from high carbon steel for Maximum strength under tough drilling conditions.

Titanium Step Drill Bit Set Unibit Drill Bits Unibits Set Uni Bit Step Bit Sets Stepped Drill Bits For Sheet Metal Hole Cutter Plastic Plexiglass Acrylic Impact Driver Unabit Up Stepper Cone Hex Shank

• SET INCLUDES: (3) Titanium Step Drill Bits (Hex Shank), (1) Locking Quick Change Bit Holder Drill Adapter (Hex Drive), (1) Fabric Case.
• The Step Bits in The Unibit Set All Have Quick Change 1/4” Hex Shanks (COMPATIBLE WITH DRILLS & IMPACT DRIVERS).
• The Included Hex Drive QUICK CHANGE BIT HOLDER ADAPTER Lets You Easily Change Bits in Your Drill (it Fits The Unibits, Along With ANY Type of Hex Bit!).
• Great For Drilling MULTIPLE SIZE HOLES in Thin Metal, Sheet Metal, Plastic, Plexiglass, Acrylic, Lexan, Plywood, PVC Pipe, Conduit, Polycarbonate, Fiberglass, And Much More!.
• Step Drill Bit Sizes: 1/8” | 5/32” | 3/16” | 7/32” | 1/4” | 9/32” | 5/16” | 11/32” | 3/8” | 13/32” | 7/16” | 15/32” | 1/2” | 9/16” | 5/8” | 11/16” | 3/4”.

Gilmour Pro O-ring - Rubber Replacement Seal

Martin 6018 Coupling Chain, Steel, Inch

• For use with Martin Quadra-Flex series flexible couplings (sold separately).
• Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not.
• Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly.
• Teeth help to distribute torsional load across the flange and sleeve, reducing wear and extending service life.

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

• 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
• 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
• 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
• 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
• 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

• Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
• Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
• Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
• These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

14FT Fiberglass Running Electrical Wire Cable Glow Rods Wire Pulling, Fish Rods Electrical Kit with 8 Different Attachments and Fish Tape Wire Puller Kit1

• This 14'fiberglass running wire cable electrical fish tape kit is made of fiberglass material, low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings..
• Includes 10 rods each one 1.4ft,(3/16" diameter) with 8 attanchment:threaded brass connectors, Magnetic connector,3/16" acrylic connection, brass push ,brass hook,rope chain ,eyelet ring and pull rods..
• This fish tape kit is flexibility(don't over force), rigidity and great insulation, wear-resistant,corrosion-resistant and oxidation resistance,The extension rods can be connected together to achieve the required length, extending up to 14 feet(4.26M)..
• Use for running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings, Great for installing cable,wires,HDMI and so on .The bright green fish tape helps u locate and differentiate the rods from wires easily..
• The pacakge comes with a plastic storage case ,its convenient to store..

FTIHTRY 22FT Fiberglass Running Electrical Wire Cable Glow Rods Wire Pulling, Fish Rods Electrical Kit with 8 Different Attachments and Fish Tape Wire Puller Kit

• This 22FT fiberglass running wire cable electrical fish tape kit is made of fiberglass material, low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings..
• Includes 16 rods each one 1.4ft,(3/16" diameter) with 8 attanchment:threaded brass connectors, Magnetic connector,3/16" acrylic connection, brass push ,brass hook,rope chain ,eyelet ring and pull rods..
• This fish tape kit is flexibility(don't over force), rigidity and great insulation, wear-resistant,corrosion-resistant and oxidation resistance,The extension rods can be connected together to achieve the required length, extending up to 22 feet(6.7M)..
• Use for running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings, Great for installing cable,wires,HDMI and so on .The bright green fish tape helps u locate and differentiate the rods from wires easily..
• The pacakge comes with a plastic storage case ,its convenient to store..

Motis - Firefighting Mini Spanners, Lightweight & Portable Spanner Wrench, Must Have Firefighter Tools, Red, 2-Pack

• Ultra-lightweight & Accessible - A practical addition to your set of firefighter tools, our mini spanner weighs only 2.5 ounces each. It fits in your bunker gear pocket, making it easy to access any time, anywhere..
• Heavy-duty - Our mini spanner wrench is made of 6061 T6 aluminum, a metal suitable for tough tasks while firefighting. Small yet sturdy and tough, it excels at getting the job done.Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
• Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
• Undoes Couplings - No need to run back to the truck to grab spanners. Keep these mini spanner wrenches in your bunker gear pockets..
• Great Value Pack of 2 - This firefighter spanner wrench comes in pairs..

Milwaukee 48-22-3108 Quick Adjust Reaming Pliers, 8-Inch

• Exposed Reaming Handles - Up to 1-Inch Conduit (Patent Pending).
• Reaming Head Design - Smooths out rough edges of up to 1-1/2-Inch Pipe (Patent Pending).
• Quick Adjust Jaws - V-groove jaws create a more precise fit with up to 1-1/2-Inch Jaw Capacity.
• Forged Alloy Steel - For Maximum Tool Strength.
• Rust Protection - Increases tool life by reducing corrosion.

Boeray 11' Fiberglass Running Electrical Wire Cable Pulling Fish Tape Kit with 5 Different Attachments and Fish Tape Tool in a Carrying Case

• Material: Fiberglass. Fiberglass better than Plated Carbon Steel, this fish tape will not break when folded, faster, easier pulls: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
• Size: Length:1.1FT (33cm)/pcs, Diameter: 0.16" (4mm), can be extended up to 11FT and combined with second kit.
• Multifunctional:Tool comes with Includes Fiberglass Rod, Plus 10in Chain Noodle, connection, Hooks, and Carrying Case.Can be combined with additional kits,very convenient.
• Fish Tape Fastener:Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly.
• Use for your interior and exterior Electrical Site Wiring like, Outlet, Plug, Socket, light fixture, Ceiling Fan, Dimmer, Switch, short runs installing electrical box, Electrical Panel, Subwoofer Box, Switch Box, Junction Box, CPU, Breaker Box, Receptacle box, Transformer, Doorbell, Intercom, Surveillance Camera, DCC, Security systems, Smoke detector, Thermostat, Appliances, Hot Tub, Telephone/Internet Line or Cable TV Coax.