Reviews Conduit Reducing Coupling

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe sc....
Check Stock

Milwaukee 48-22-3108 Quick Adjust Reaming Pliers, 8-Inch

  • Exposed Reaming Handles - Up to 1-Inch Conduit (Patent Pending).
  • Reaming Head Design - Smooths out rough edges of up to 1-1/2-Inch Pipe (Patent Pending).
  • Quick Adjust Jaws - V-groove jaws create a more precise fit with up to 1-1/2-Inch Jaw Capacity.
  • Forged Alloy Steel - For Maximum Tool Strength.
  • Rust Protection - Increases tool life by reducing corrosion.
Check Stock

Lovejoy 05194 Size 1070 Grid Coupling Seal Kit Only, Vertical

  • For use with Lovejoy 1000 series grid coupling assembly (sold separately).
  • Interchangeable assembly component for quick installation, reducing labor and downtime.
  • Stamped steel for strength and durability.
  • Supports constant angular misalignment of up to 0.25 degrees.
  • Imperial unit measurements for industry consistency.
Check Stock

Lovejoy 05187 Size 1130 Grid Coupling Seal Kit Only, Horizontal

  • For use with Lovejoy 1000 series grid coupling assembly (sold separately).
  • Interchangeable assembly component for quick installation, reducing labor and downtime.
  • Die-cast aluminum is lightweight and resists corrosion and tarnishing.
  • Supports constant angular misalignment of up to 0.25 degrees.
  • Imperial unit measurements for industry consistency.
Check Stock

Lovejoy 05188 Size 1140 Grid Coupling Seal Kit Only, Horizontal

  • For use with Lovejoy 1000 series grid coupling assembly (sold separately).
  • Interchangeable assembly component for quick installation, reducing labor and downtime.
  • Die-cast aluminum is lightweight and resists corrosion and tarnishing.
  • Supports constant angular misalignment of up to 0.25 degrees.
  • Imperial unit measurements for industry consistency.
Check Stock

U.S. Pool Supply1-1/4' or 1-1/2' Hose Connector Coupling for Swimming Pool Vacuums, Cleaners or Filter Pump Hoses - Pool Maintenance

  • Swimming Pool 1-1/4" or 1-1/2" Hose Coupling Connector Adapter. It is made of durable plastic and measures 4.75 inches long..
  • Use coupling to connect two 1-1/4" hoses together, two 1-1/2" hoses together, or mix-and-match 1-1/4" and a 1-1/2" hoses together..
  • It's ideal for use connecting vacuums hoses together and for connecting pool pump and filter hoses. For in-ground or above-ground pools and spas..
  • Use this hose connector for reducing 1-1/2" hose down to 1-1/4" hose so larger pool pumps can be used with smaller above-ground pools..
  • Buy with confidence, as our premium quality pool products are built to last, and if you're not satisfied with them at any time within one year of purchase, we'll provide a refund or replacement..
Check Stock

Martin 6018 Coupling Chain, Steel, Inch

  • For use with Martin Quadra-Flex series flexible couplings (sold separately).
  • Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not.
  • Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly.
  • Teeth help to distribute torsional load across the flange and sleeve, reducing wear and extending service life.
Check Stock

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

  • Material:Conduit hangers are made of zinc-plated iron,durable to use..
  • Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
  • High-quality and durable conduit hangers with bolt..
  • Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock

Snowpiercer: The Complete First Season S1 (DVD)

  • 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK,Size:3/4inch, The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
  • 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
  • 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
  • Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
  • 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock

Lovejoy 06255 Size 1060 Grid Coupling Spacer Hub Hardware, 3600 rpm Max Rotational Speed

  • For use with Lovejoy 1000 series grid coupling assembly (sold separately).
  • Replacement parts for spacer hub with drop-out section.
  • Die-cast aluminum is lightweight and resists corrosion and tarnishing.
  • For use with horizontally split hub covers where mounting space is limited.
  • Interchangeable assembly components for quick installation, reducing labor and downtime.
Check Stock

Nitto Terra Grappler All-Terrain Radial Tire -LT315/75R16/8 121Q

  • Angled lateral voids channel away water in wet conditions and provide stability on dry roads.
  • Circumferential voids help the tire maintain straight-line traction.
  • Coupling joints connect lugs, reducing tread flex and providing high-speed stability.
  • High-density siping resists hydroplaning and improves traction in wet and snowy conditions.
Check Stock

9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm

  • Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
  • Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stock