Reviews Conduit Locknuts Connectors

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Snowpiercer: The Complete First Season S1 (DVD)

  • 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK，Size：3/4inch， The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
  • 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
  • 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
  • Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
  • 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock

Klein Tools D333-8 Conduit Locknut and Reaming Pliers

  • Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
  • Reams and smoothes both inside and outside of conduit.
  • Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
  • Forged in the USA with custom, US-made tool steel for maximum durability.
Check Stock

FirmiBang Liquid Tight Connector 3/4 in - Non-Metallic Electrical Conduit Fittings, UL Listed PVC Conduit Fitting (Straight, 5 Pack)

  • ▲PREMIUM QUALITY - Liquid tight connectors are made of high-impact PVC, Flammability rating 94V-2, Temperature index 125 ° C. Rust and corrosion resistant..
  • ▲Easy to install - FirmiBang flexible conduit connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule..
  • ▲Wide Application Range - Electrical conduit connector is suitable for indoor or outdoor use. Connects type B non-metallic liquid-tight conduits to weatherproof outlet boxes, pool and spa equipment motors, central air-conditioning units and various other electrical enclosures and hubs..
  • ▲PACKAGE - Each connector comes with a sealing washer and locknut. We have different models of liquid-tight connectors to meet your different needs..
  • ▲After-sales guarantee - If you have any question with our liquid tight connectors , Feel free to contact us. We will answer you as soon as possible..
Check Stock

Morris Products 14940 EMT Compression Connector, Steel, 1/2\ Trade Size (Pack of 25)

  • EMT Compression Connectors - Steel - EMT Compression Connectors are Used To Secure EMT Conduit in an Enclosure..
  • Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures.
Check Stock

Sigma Engineered Solutions Sigma Electric ProConnex 45101 Rigid Conduit Locknut 1/2-Inch, 20-Pack, Silver/Pewter

  • Secures Rigid conduit, IMC and other threaded connectors to a box or enclosure.
  • Compatible with 1/2-in Rigid conduit, IMC and other threaded connectors.
Check Stock

Sigma Engineered Solutions Sigma Electric ProConnex 45102 Rigid Conduit Locknut 3/4-Inch, 20-Pack, Silver/Pewter

  • Secures Rigid conduit, IMC and other threaded connectors to a box or enclosure.
  • Compatible with 3/4-in Rigid conduit, IMC and other threaded connectors.
Check Stock

HydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Woods Southwire 55094222 Liqua Flex 1/2-Inch by 50-Feet Non-Metallic Liquidtight Flexible Conduit

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included (1/2\ Dia. x 50 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock