Reviews Conduit Hole Saw

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

7 Pcs TCT Hole Saw Kit, Tungsten Carbide Tipped Hole Cutters Set Heavy Duty for Stainless Steel Hard Metal Wood Plastic, Dia Size 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 2”, with Extra Pilot Drill Bits

  • Cutting Holes in 7 Different Sizes: Package includes 7 Hole Saws in most popular sizes - 3/4” (19mm), 7/8” (22mm), 1” (25mm), 1-1/8” (29mm), 1-1/4” (32mm), 1-3/8” (35mm), and 2” (50mm), cutting perfect holes for conduit and pipes.
  • TCT Hole Saw Kits for Hard Materials: This Set of Tungsten Carbide-Tipped Hole Cutters can cut precise holes in a lot of materials, such as stainless steel, mild steel, copper, iron, FRP, aluminum, wood and plastic with thickness up to 1/5” (5 mm).
  • Double Pilot Drill Bits for More Holes: Each hole saw kit includes 1 Hole Saw, 1 Hex wrench and 2 Pilot Drill Bits.
  • Starting with lower torque and lower speed, using cutting oil as lubricant will ensure clean holes and also prevent bit from getting burnt or broken.
  • Designed for Tough Jobs: All the Hole Cutters built with carbide tipped teeth and 3/8” 3-Flatted Shank, allowing a strong and steady chuck grip for heavy duty hole cutting applications.
  • compatible with drills, impact drills and CNC drilling machines.
  • Well Organized and Rust-Resistant: Each hole cutter kit is oiled and packed in a Semi-Transparent plastic carrying case for rust-resistant & well-organized storage and easy access.
  • Please feel free to contact us if you have any problem in using the Hole Cutte....
Check Stock

Kweetle Upgraded 10 Pcs TCT Hole Saw Kit, Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • ...t precise holes in a lot of materials.
  • 【Size】:Package includes 10 Hole Saws in most popular sizes-16mm(5/8”), 18mm(11/16”), 20mm(3/4”), 22mm(7/8”), 25mm(1”), 30mm(1-1/8”), 35mm(1-3/8”), 45mm(1-3/4”), 50mm(2”), 53mm(2-1/8”). Cutting perfect holes for conduit and pipes..
  • 【High Precision and Convenience】Each kit includes a split point pilot drill bit preventing bit walking and ensuring very high quality and smooth holes, and an ejection spring providing easy slug removal, Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Multipurpose and Rust-Resistant】Each hole cutter kit is oiled for rust-resistant & well-organized storage and easy access. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood and other general sheet metal..
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

Klein Tools 80035 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Measures Angles, Magnetic Base, 2-Piece

  • MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
  • REVERSE CONTRAST DISPLAY improves visibility.
  • MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
  • V-GROOVE EDGES enable optimal alignment on conduit and pipes.
  • DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

Fear Inoculum

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

STRUT 3/4\ CONDUIT CLAMP by UNISTRUT MfrPartNo RP1212EG

  • QUALITY AND DURABILITY – These 3/4-inch snap-on conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT one-hole pipe strap provides extra strength and durability..
  • EASY INSTALLATION – These one-hole design snap-on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use a screw to secure it onto any surface. They are perfect for both indoor and outdoor applications..
  • ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit many different pipes, cables, hoses, and tubes. Choose from a selection of 1/2 Inch, 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch, and 2 Inch sizes..
  • VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to pipes, tubes, cables, and hoses..
  • WHY CHOOSE AIRMONT PRODUCTS? ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.
Check Stock

Morris 19425 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 3/4\ (Pack of 50)

  • 1 Hole Rigid Pipe Straps - Heavy Duty - Steel - Secures Rigid & IMC Conduit..
Check Stock

Patrick Seeker Presents Intros & FX Presentations DJ Tools

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

FAMKIT Woodworking Strap Clamp Adjustable Ratchet Band Clamp Miter Mitre Vise Tool for Cabinets, Drawers, Barrels

  • 1 Hole Rigid Pipe Straps - Heavy Duty - Steel - Secures Rigid & IMC Conduit..
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

BOSCH PS60N 12V Max Pocket Reciprocating Saw (Bare Tool),Blue

  • COMPACT POCKET RECIP DESIGN: engineered to provide balanced handling and to be able to reach into tight spaces.
  • SHORT 11.0 INCH LENGTH: ideal for difficult cuts and overhead use.
  • LIGHT WEIGHT: weighs only 2.2 Lbs. (tool only, not including battery) for less user fatigue.
  • POWER 12V MAX MOTOR: delivers up to 3,000 no-load strokes per minute, and it cuts materials such as copper and conduit.
  • DURABLE DESIGN: features a front rubber-like wrap-around boot to help protect internal parts from dust, debris, and water.
  • INCLUDES: reciprocating saw, (1) metal reciprocating saw blade and (1) wood reciprocating saw blade.
Check Stock