Reviews Conduit Fitting Cable Gland

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • ... KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most application....
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...- This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most applications....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most application....
Check Stock

DAKASON 4-Pack LED Vapor Tight Light 40W (80W Eq.) 4200lm, 4FT Outdoor Shop Light Waterproof 5000K IP66 100-277V LED Vapor Proof Fixture for Parking Garage Car Wash Warehouse UL Listed

  • ENERGY EFFICIENT – Powered by only 40 watts total at 4200lm, the LED vapor proof light produces large amounts of light at an energy saving cost, perfect replacement for 80-120watts metal halide or fluorescent fixture and no ballast to replace..
  • WATER PROOF – IP 66 rating, non-corrosive polycarbonate (PC) housing, stainless-steel hasps and clips, designed for wet, damp and dusty area. 0-10V dimmable（Dimmer Not Included)..
  • WIDE APPLICATION – Widely used in Car Wash, Warehouse, Barn, Walk in Freezer, Gas Station, Parking Garage and Industrial Kitchen, Stairwells, Tunnel, Patio outdoor venues, etc. where moisture is a concern..
  • EASY TO INSTALL – Mounting Bracket and screws included for Wall Surface Mount. There are also one cable gland and one conduit adaptor provided for waterproof cable connection (Cable NOT included)..
  • BUY WITH CONFIDENCE - With UL Certification, Dakason linear vapor proof shop light fixture meets strict efficiency, quality, and lifetime criteria. Maintenance-free LEDs with 50,000 hours of life. 5-year warranty. If there’re any issues with our product, please contact us..
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most appl....
Check Stock

Wiremold Power Strips Plugmold End Feed Fitting V2010A2

  • For connecting 2000 with 1/2" conduit and armored cable connectors.
  • 1/2" trade size KO's on end each side and bottom.
Check Stock

DAKASON 1-Pack LED Vapor Tight Light 40W (80W Eq.) 4200lm, 4FT Waterproof Shop Light 5000K IP66 100-277V LED Vapor Proof Fixture for Indoor or Outdoor Parking Garage Car Wash Warehouse UL Listed

  • ENERGY EFFICIENT – Powered by only 40 watts total at 4200lm, the LED vapor proof light produces large amounts of light at an energy saving cost, perfect replacement for 80-120watts metal halide or fluorescent fixture and no ballast to replace..
  • WATER PROOF – IP 66 rating, non-corrosive polycarbonate (PC) housing, stainless-steel hasps and clips, designed for wet, damp and dusty area. 0-10V dimming when paired with a compatible dimmer switch (Dimmer not included)..
  • WIDE APPLICATION – Widely used in Car Wash, Warehouse, Barn, Walk in Freezer, Gas Station, Parking Garage and Industrial Kitchen, Stairwells, Tunnel, Patio outdoor venues where moisture is a concern..
  • EASY TO INSTALL – Mounting Bracket and screws included for Wall Surface Mount. There are also one cable gland and one conduit adaptor provided for waterproof cable connection (Cable NOT included)..
  • BUY WITH CONFIDENCE - With UL Certification, Dakason linear vapor proof shop light fixture meets strict efficiency, quality, and lifetime criteria. Maintenance-free LEDs with 50,000 hours of life. 5-year warranty. If there’re any issues with our product, please contact us..
Check Stock

DAKASON 4FT LED Vapor Tight Light 60W 6600lm (120W Eq.), Waterproof LED Outdoor Shop Light 5000K IP66 100-277V LED Vapor Proof Fixture for Parking Garage Car Wash Warehouse UL Listed

  • ENERGY EFFICIENT – Powered by only 60 watts total at 6600lm, the 4ft sealed lighting fixture produces large amounts of light at an energy saving cost, perfect replacement for 120-200watts metal halide or fluorescent fixture and no ballast to replace..
  • WATER PROOF – IP 66 rating, non-corrosive polycarbonate (PC) housing, stainless-steel hasps and clips, this LED weather proof 4ft LED light is designed for wet, damp and dusty area. 0-10V dimming when paired with a compatible dimmer switch (Dimmer not included)..
  • WIDE APPLICATION – Widely used in Car Wash, Warehouse, Barn, Walk in Freezer, Gas Station, Parking Garage and Industrial Kitchen, Stairwells, Tunnel, Patio outdoor venues where moisture is a concern..
  • EASY TO INSTALL – Mounting Bracket and screws included for Wall Surface Mount. There are also one cable gland and one conduit adaptor provided for waterproof cable connection (Cable not included). Suspension mounting supported (Needs addtional accessaries)..
  • BUY WITH CONFIDENCE - With UL Certification, Dakason linear vapor proof shop light fixture meets strict efficiency, quality, and lifetime criteria. Maintenance-free LEDs with 50,000 hours of life. 5-year warranty. If there’re any issues with our product, please contact us..
Check Stock

DAKASON 4FT LED Vapor Tight Light 60W 6600lm (120W Eq.), Waterproof LED Outdoor Shop Light 5000K IP66 100-277V LED Vapor Proof Fixture for Parking Garage Car Wash Warehouse UL Listed 4-Pack

  • ENERGY EFFICIENT – Powered by only 60 watts total at 6600lm, the 4ft sealed lighting fixture produces large amounts of light at an energy saving cost, perfect replacement for 120-200watts metal halide or fluorescent fixture and no ballast to replace..
  • WATER PROOF – IP 66 rating, non-corrosive polycarbonate (PC) housing, stainless-steel hasps and clips, this LED weather proof 4ft LED light is designed for wet, damp and dusty area. 0-10V dimming when paired with a compatible dimmer switch (Dimmer not included)..
  • WIDE APPLICATION – Widely used in Car Wash, Warehouse, Barn, Walk in Freezer, Gas Station, Parking Garage and Industrial Kitchen, Stairwells, Tunnel, Patio outdoor venues where moisture is a concern..
  • EASY TO INSTALL – Mounting Bracket and screws included for Wall Surface Mount. There are also one cable gland and one conduit adaptor provided for waterproof cable connection (Cable NOT included)..
  • BUY WITH CONFIDENCE - With UL Certification, Dakason linear vapor proof shop light fixture meets strict efficiency, quality, and lifetime criteria. Maintenance-free LEDs with 50,000 hours of life. 5-year warranty. If there’re any issues with our product, please contact us..
Check Stock

APW Wyott 21880303 Valve, Off-Hi-Lo, Gas

  • Degree of Protection : IP67 (Water Proof).
  • Total Size : 26 x 35mm / 1" x 1.4" (D*H).
Check Stock

4 in. Square Extension Ring, Drawn, 1-1/2 in. Deep with Twelve 1/2 in. KO's

  • With proper fitting can be used for Conduit, NMSC, Armored, Metal Clad, Flex cable.
  • Acceptable for use in two hour fire rated wall.
Check Stock

HydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

MAKERELE Cord Grip Cable Glands Kit for Electrical Box NPT Waterproof Nylon Strain Relief 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 50pcs Junction case Connector Black With Gaskets

  • ✔Adapt to almost all your requirements: 6 types 50pcs of NPT wire glands, there are NPT 1/4”*20pcs, NPT 3/8”*10pcs, NPT 1/2”*10pcs, NPT 3/4”*6pcs, NPT1”*2pcs, NPT1-1/4”*2pcs in our cable glands kit, adapt to almost all your requirements of work..
  • ✔High Quality: The cord grips are Made from high quality nylon PA66 plastic, wildly use to cable fixing, wire splices, machinery control boxes, distribution panels, and electrical appliances etc ..
  • ✔Waterproof: IP68 rating allows for underwater use. Resistant to salt water, weak acid, alcohol, oil, grease and common solvents. Provide long time protection for your indoor and outdoor applications..
  • ✔Widely cable size range: Widely cable range from 0.10-0.25inch/ 0.20-0.39inch/ 0.25-0.47inch/ 0.5-0.7inch/ 0.7-0.9inch/ 0.9-1.2inch cable gland assortment. Ideal cable gland box for your project needs..
  • ✔Easy to install: You just need to thread the cable through the cable gland then tight up the sealing nut and lock nut, the cable will be tightly fixed but no need to disassemble..
Check Stock