Reviews Conduit Body Bushing Locknuts- BestItemr.com

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,，UL Listed, (6 PACK) (1/2-180D)

THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
Reams and smoothes both inside and outside of conduit.
Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
Forged in the USA with custom, US-made tool steel for maximum durability.

5 Pack of Metal Push Button On/Off Switches.
Brass Finish, Metal Bushing with 6 Inch Wire Leads Stripped Ends..
The base portion measures 7/8" L x 3/4" W x 1/4" thick with 7/16 inch long threaded nipple with 2 locknuts.

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include Complete single trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x 3" tall hangers, 2 x 2.1" tall hangers, 4 x shackle straps (eye to eye 3.09"), 6 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
2 x tie plates for 1-3/4" or 2" leaf springs.
Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.

PVC Electrical Conduit Cement 633L is specially formulated for use on PVC conduit Types I and II.
It is a medium body cement in clear or gray to match conduit color.
Medium fast setting allows corrections before setting up.

Set includes: (1) 1/2" 7x12 AR500 Shooting Target Body, (2) AR500 Universal Ground Stand Legs, and (2) 3/8” bolts and nuts. Legs can be used with....
Simply slide the body slots into the stand leg slots and you're ready to shoot..
Entire assembly can be placed on the ground or raised to your preferred height with 3/4” conduit commonly found at Lowe’s, Home Depot, etc..
When you're finished shooting, line up the body and stand holes, insert the bolts, tighten the nuts, and your target can be easily carried..

Level's high-visibility orange body is easy to see on conduit and at the jobsite.
Torpedo level has large, easy-to-read high-visibility vials at 3 angles: level, 90 and 45 degrees.
Large top-view vial windows enable easy readability from multiple angles.
Magnetic bottom holds securely to conduit and metal surfaces.
V-Groove fits contour of conduit and pipe.

Competition Bushing Sizing Die -- With this die, the cartridge case is completely supported and alig.
The Body Die -- is designed to full length resize the case body only and bump the shoulder position.
Competition Seating Die -- The bullet guide to seating stem fit is so precise that the seating stem.