Reviews Concrete Pipe Machine

VEVOR 4800W Wall Chaser 42 mm Cutting Width,Wall Groove Cutting Machine 41MM Cutting Depth,Wall Slotting Machine With 8 Saw Blades 5 Diameter 6200r/Min,One-time Forming Dustless

  • Adjustable Electric Wall Slotting 125 MM: This electric concrete slotting machine features a one-time molding for quick and clean cutting of wall....
  • Infrared Design & Moveable Cover: The electric wall cutter machine is designed with an infrared lighting and moveable cover. The infrared rays make....
  • Water Pump for Dust-Free Environment: Our concrete cutter machine comes with a water pump and a long water pipe, which can be used to control the dust....
  • Excellent Portability & High Efficiency: This wall chaser cutter is highly efficient with two ergonomic handles that are both angle adjustable and a....
  • Easy Installation & Wide Application: It is easy to install the saw blades(1 to 8pcs). This electric concrete saw machine is widely used in decoration....
Check Stock

VICSEC 110V 6800W Electric Concrete Saw 14" Wet/Dry Circular Saw with 135 Saw Blade and Rolling Pulley Masonry Cutting Tool for Granite, Porcelain, Wood,Concrete, Stone, etc.

  • 【Powerful motor and heat dissipation function】： This new circular saw concrete cutting machine has a power of 6800W and a motor speed of 4600r/min, which greatly improves work efficiency, and has 360° all-round heat dissipation, so there is no need to worry about damaging the machine under high-intensity operations，safe to use..
  • 【Dust-proof design, wet and dry use】:The tile saw adopts a dual integrated dust management system is adopted, and the dust extraction port discharges cutting debris in time.
  • the water inlet accessory is built in during wet cutting, and the convenient valve controls the flow, and the water pipe supplies water to the blade to reduce dust, Improve blade performance and life.
  • 【With rolling pulley, cutting labor saving】: The wall chaser concrete cutter has its own roller design, which saves effort, and can be flexibly installed or disassembled according to the actual situation..
  • 【Sharp cutting, all-round protection】: The cement saw is equipped with a sharp saw blade with a diameter of 350mm, and the cutting depth can reach 130mm..
Check Stock

Reed Tool SC49-6 Ratcheting Soil Pipe Cutter with 6-Inch Chain

  • The fastest way to cut cast iron soil pipe, clay pipe, small diameter concrete pipe is with a chain pipe cutter.
  • Pipe Capacity (Inch - Nominal): 1 1/2-Inch - 6.
Check Stock

Ezygrind Inside Pipe Cutter with 1 1/2\ (36mm) Diamond Blade

  • Pipe cutter for cutting plastic pipe 1 1/2" - 3" from the inside..
  • Internal pipe cutter includes 2 Free Flow Guide Wheels that stabilize the blade during cutting..
  • Plumbing tool with reduced cutting vibration for a smooth cutting action..
  • Inside PVC pipe cutter for cutting HDPE and ABS pipe in hard to reach places..
  • Internal PVC pipe cutter comes with a longlife diamond blade that can cut concrete..
Check Stock

Ezygrind Inside Pipe Cutter with 3 1/8\ (80mm) Diamond Blade

  • Pipe cutter comes with 2 Free Flow Guide Wheels for cutting 4" - 6" pipe from the inside..
  • Internal pipe cutter with a measured blade cutting depth for longer blade life and faster cutting..
  • Plumbing tool comes with a segmented diamond blade that will cut plastic and concrete..
  • Inside PVC pipe cutter attacks PVC, HDPE and ABS plastic fast without melting the pipe..
  • Internal PVC pipe cutter uses the Free Flow Guide Wheel to minimizes vibration..
Check Stock

Zircon MetalliScanner MT6 Professional Metal Detector

  • Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
  • Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
  • Shows the depth of metal from the surface in both inches and centimeters.
  • Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
  • Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.
Check Stock

Kett KSV-434 120-Volt Vacuum Saw

  • Cuts straight or angle up to 45 degree by adjusting the cutting fence.
  • Multi Purpose Cut off machine for cutting angle, pipe, tubing, steel rod and with abrasive masonry blades for cutting brick, concrete blocks and various masonry materials.
  • Can quickly adjust the vise with quick-release knob.
  • Cuts up to 5-1/8" material at 90 degree angle.
  • Cuts up to 4-1/8" round material at 45 degree angle.
Check Stock

Zippity Outdoor Products ZP19002 No Dig Fence Newport, 36"H x 72"W, White

  • EASY INSTALL: Installs without digging holes, pouring concrete, or tearing up your yard.
  • use a sledgehammer or post pounder to install the no-dig pipe anchor.
  • WHAT'S INCLUDED: Each unit includes 1 fence panel, 1 post, 1 no-dig pipe anchor and (1) cap.
  • this product is designed to scale, so you will need to order a finishing post to complete your fence project (item ZP19003).
  • ONLY ONE POST INCLUDED: You will need to order 1 finishing post to complete your fence project (item ZP19003).
  • VIRTUALLY MAINTENANCE-FREE: No painting, staining or maintaining required.
  • SOIL TYPES: If you have sandy soil, you may need to install Pipe Anchors using concrete footings for added support..
Check Stock

Wheeler Rex 491-8 Manual Pipe Cutter

  • Super Hydraulic Pipe Cutter:6"-18" ASA Class 26 and 6"-20" Class 22 Water Main.
  • Wheeler-Rex Hydraulic Cutters are the solution to cutting larger diameter pipe.
  • Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe..
  • Their remotely operated hydraulic pumps provide the required power..
  • A minimum clearance is needed to wrap cutter chain around pipe, to engage it in the cutter jaws..
Check Stock

Zippity Outdoor Products ZP19041 No Dig All American Fence, White

  • DIMENSIONS: This fence panel measures 42" H x 72" W.
  • INSTALLATION: Install without digging holes, pouring concrete, or tearing up your yard.
  • use a sledge hammer or post pounder to install the steel no-dig pipe anchor (included) and sleeve your vinyl post over top.
  • FINISHING POST REQUIRED: This fence is designed to scale so you will need a finishing post to complete your fence run. (You will not need a finishing post per fence panel) Give us a call for further assistance with your project.
  • WHAT'S INCLUDED: Each unit includes (1) fence panel, (1) post, (1) no-dig pipe anchor, (4) brackets and (1) cap.
  • this product is designed to scale, so you will need to order a finishing post to complete your fence run (item ZP19046).
  • SOIL TYPES: If you have sandy soil, you may need to install Pipe Anchors using concrete footings for added support..
Check Stock

Flange Wizard 42050-T Threaded Two Hole Pins, 1/2" - 1-7/16"

  • 【Size Reference】Fit Pipe Diameter: 2.02 inch/51.5mm. Outer Diameter: 3.34 inch/85mm. Height: 0.51 inch/13mm..
  • 【Reliable Material】This flange pipe cover is made of high-quality PP plastic, high heat resistance, and corrosion resistance fit many occasions. Don't worry about the pipe collar breaking when installing. The ring shape after the installation is no deformation..
  • 【Pipe Cover Decoration Function】When the pipe passes through the wall, it leaves an unsightly surface. Can be masked with a pipe collar, to decorate making the wall and environment..
  • 【Wide Applicatons】The water pipe cover decoration can also be used to protect ladder mounting hardware and cover gaps between the concrete and the hardware..
  • 【Package Includes】1Pc x Pipe Cover Flange.
Check Stock

RIDGID 74207 Model 276 Soil Pipe Cutter, 2-inch to 6-inch Chain Pipe Cutter

  • Provides one stroke cutting of service weight, NO HUB soil pipe, clay and concrete pipe.
  • Compatible Chain Extension Assembly (sold separately) can accommodate pipes up to 8-inches.
  • Pipe cutter has a 2-inch to 6-inch (40 mm to 150 mm) pipe capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

10pcs SDS Plus Concrete Hole Saw Kit Extension Shank Mansonry Cement Wall Drill Bit TCT Core Drill Set Tungsten Hole Cutter for Drilling Brick Concrete Cement Stone

  • [What You Will Get]: 35mm, 40mm, 50mm, 65mm, 82mm and 110mm core drill bits, SDS+ arbors, pilot drills and a 300mm SDS+ extension shank.
  • [Tungsten Carbide Tip Drill]: This top-of-the-line TCT (tungsten carbide tip) core set offers faster cutting speeds and longer service life, making....
  • [Technical Application]: 35mm-45mm hole saw extension concrete cement wall drill bit for drilling water pipe and heating pipe, 55mm-80mm drill for air....
  • [Durable Material]: This sds plus extension shank hole saw drill bits for concrete cement is very solid, using high-quality alloy welding, for the....
  • [Widely Used]: This masonry hole saw kit easily drills holes on common wall materials, such as brick, adobe, concrete, cement, and stone, widely used....
Check Stock