Reviews Concrete Injecting Machine

LAUNCH Autool CNC-602A Fuel Injection System Cleaning Tools CNC602A Injector Cleaner and Tester with 110V Transformer

  • [NOTE:] We do not provide any liquid in the package, Please buy liquid from your local market.Ultrasonic cleaning: To perform simultaneous cleaning on....
  • [Uniformity/Sprayability test: ] To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with....
  • [Leakage test: ] To test the sealing and dribbling conditions of injectors under system pressure..
  • [Injecting flow test: ] To check the injecting amount of the injector in 15 seconds of constant injection. * Auto. test: To test injectors by....
  • [On-vehicle cleaning: ] The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle..
Check Stock

Chop s Power Injector System 14 Gauge Needles 4 Pack

  • 4 Pack of 14 Gauge needles 2 inches long for Chop's Power Injector System!.
  • Great for Injecting fluids into your favorite meats!.
  • These are the only needles we use while injecting juices and strained injections!.
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

BEAMNOVA Electric Concrete Vibrator Handheld 11000 Vibration Per Minute 2HP with Shaft of 14-3/4 Feet

  • EFFICIENT & LONG REACH - BEAMNOVA concrete vibrator features of powerful 110V 60hz 1500W electric motor and vibrating head that gain speeds up to 11000 rpm. Vibrator shaft is of 1-1/2 diamter and the length is up to 14-3/4 ft. It helps to enlarge your work range and improve work efficiency..
  • USEFUL - Immerse the head of concrete vibrator into wet concrete to remove any trapped air and excess water to allow the concrete to settle within the formwork properly and solidly. Also you can use it to level the concrete..
  • USER-FRIENDLY DESIGN - Metal-Built Case is ot non-scrolling design, lightweight, rugged and durable, able to prevent cement from penetrating. The vibrating 1-1/2 inch head is capable of inserting into concrete via small holes or gaps. 14-3/4 ft vibrator shaft can reaches deeper and farther..
  • WIDE APPLICATION - It helps to remove air bubbles, and excess water and level the concrete. Great for patching and construction job, pouring process of cement pillars, onstruction of highway fence and bridge, pouring process of cement grape rack, etc..
  • Note: When the item doesn't work after staring, pls gently tap the head of the vibrator to engage it. If the machine still does not start after this operation, please kindly contact us. This machine can only b....
Check Stock

Stark USA KIT61041 Cement Trowel 22" w/Float Pan 6.5hp 196cc Gas Engine Walk Behind Concrete Surface Finisher Epa

  • For maximum flexibility, engine type, trowel diameter and handle type can be selected to meet individual preferences or job site conditions.
  • Power Trowel is an equipment used for most areas of concrete straightening. It's an extra-strong machine, designed to allow a perfect finish of the concrete.
  • Powered by a 6.5 HP Loncin G200FA motor equipped with four blades that finish off the concrete slabs with ease. Created with industrial grade material that can withstand heavy use and provide you excellent finishing on concrete.
  • Walk-Behind Trowel is an easy to use machine while finishing off the concrete that you have poured. Reducing the manual labor with this device you can cover more ground in the same given time on a job.
  • With the included float plan, push down imperfections and prepare the surface the final concrete finishing.
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Wall Grooving Machine Channels Cutter Concrete Cutting Machine for Cutting Slotting Marble Concrete Grooves 110V Red

  • Concrete Cutting Machine - designed to carve into masonry&concrete a small channel to insert a metal or plastic conduit for electrical wiring.
  • Machine Parameter- Voltage: 110v, Powder: 4800w, Channel width: 1.65"(adjustable),Channel depth: 0-1.57" (adjustable),Length the cable: 3m.
  • Easy use - Machine weight 6.2kg,the handle can be rotated as required. Equipped with infrared locator, you can use infrared positioning in advance....
  • Certified Safe - Adopt high power copper electromechanical, Maximum load power 5500w,with leakage protection function. Dust catcher (Need to buy) and....
  • Wide application - This Wall slotting machine can used for decoration and industrial wall/floor grooves.You can cut grooves in concrete, brick,....
Check Stock

YARDMAX YM0115 4.0 Cu. Ft. Concrete Mixer

  • 【Powerful Cement Mixer】The 2/3HP 120V/60Hz 3.5A concrete mixer machine is equipped with an electric direct-drive motor (550W), and the item is perfect for projects around the house, farm, and other medium-size building projects, capable of handling cement, mortar, or stucco and other material.
  • 【Large Capacity Drum】Compared with other similar household concrete mixers on the market, FYFAY's drum volume is up to 3.5 cubic feet, which is able to mix more concrete at one time and mix more evenly, saving time and improving efficiency.
  • 【Stable & Durable Structure】The electric cement mixer is constructed with a cast-iron drum and heavy-duty steel frame. Drum and frame have a smooth and durable lacquer coating that makes the mixer durable. There is a safety lock on each foot pedal making it safe and stable when working.
  • 【Practical Concrete Mixer & Saving Labor】 Equipped with 7 in. solid rubber wheels, the concrete mixer machine can be moved easily which is labor-saving to move forward or backward. Compared with a manual cement mixer, the electric cement mixer saves time and money. What's more, it will save rent and labor costs.
  • 【Manufacturer Warranty】 In order to solve customers' concerns about quality, FYFAY's concrete mixer carries a 90-day....
Check Stock

VEVOR 4800W Wall Chaser 42 mm Cutting Width,Wall Groove Cutting Machine 41MM Cutting Depth,Wall Slotting Machine With 8 Saw Blades 5 Diameter 6200r/Min,One-time Forming Dustless

  • Adjustable Electric Wall Slotting 125 MM: This electric concrete slotting machine features a one-time molding for quick and clean cutting of wall....
  • Infrared Design & Moveable Cover: The electric wall cutter machine is designed with an infrared lighting and moveable cover. The infrared rays make....
  • Water Pump for Dust-Free Environment: Our concrete cutter machine comes with a water pump and a long water pipe, which can be used to control the dust....
  • Excellent Portability & High Efficiency: This wall chaser cutter is highly efficient with two ergonomic handles that are both angle adjustable and a....
  • Easy Installation & Wide Application: It is easy to install the saw blades(1 to 8pcs). This electric concrete saw machine is widely used in decoration....
Check Stock

Oarlike 4.2 Cu Ft Electric Concrete Mixer Portable Cement Mixing Machine for Stucco, Mortar Seeds with Wheel and Stand

  • 【POWERFUL MOTOR】: The cement mixer is equipped with Heavy duty motor, speeds up to 1680RPM, handles stucco, mortar, or concrete at 23RPM, not only is ideal for commercial use, but also for agricultural use, like inoculating seeds and mixing feeds.
  • 【PORTABLE DESIGN】: Equipped with 2 rubber wheels, the concrete mixer machine can be moved easily which is labor-saving to move forward or backward, which provide convenience for moving the machine on any road condition.
  • 【LARGE CAPACITY DRUM】: Features a 5 cu ft. (140L) mix capacity, compared with other household mud mixer, our multi-functional concrete cement mixers can complete the mixing work more efficiently and quickly. The resulting mixture is more uniform.
  • 【DURABLE AND STURDY】: The Wheelbarrow Mixer is made of high-quality steel, drum and frame have a durable powder-coat finish for ultimate strength and durability. Besides, the triangular stand design with wheels ensures extra stability.
  • 【SAFE AND EASY TO OPERATE】: Comes with all hardware parts and manual, the cement mixing machine is easy assembly. Overload protector when the machine overload or motor hot will stop work and protect the motor.
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock