Reviews Concrete Filling Machine

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

Multifunctional A03 Manual Paste Liquid Filling Machine, Wine Bottle Filler 5-50ml, Stainless Steel lip gloss base Filling Machine for liquid cosmetic,Cream, Shampoo, Cosmetic, Honey

  • ①【Filling Capacity】5-50ml (liquid，paste or other liquid substance). Our A03 filling machine named lip gloss dispenser machine, cream filling machine, lotion filling machine, oil dispenser machine, wine bottle filler. Our A03 filling machine does not require electricity and gas, which is suitable for laboratory and small batch production..
  • ②【Corrosion resistant】The machine is suitable for acidic liquids, good wear resistance and high temperature resistance, and can be filled with paste liquids up to 200°C..
  • ③【Update filling machine】High-quality steel cylinder, water separator, stainless steel filling nozzle and anti-drip design can ensure accurate filling and product purity..
  • ④【Easy to clean】This machine is made of high-quality stainless steel, which runs stably and has a long service life. And the hopper is easier to disassemble and clean..
  • ⑤【Application】The manual filling machine is mainly used for the filling of liquid paste in the pharmaceutical, daily chemical, food processing and other industries. It can also be used for quantitative filling of sealed hoses. It is an ideal paste liquid filling equipment..
Check Stock

BestEquip A03 Liquid Filling Machine 5-50ml Bottle Filler Manual Liquid Filling Machine for Cream Paste

  • Efficient Manual Filling: The liquid and paste filling machine are operated by manual power, providing an efficient and accurate filling with high speed. Filling speed: 20-30 times/min. Filling volume: 0.17-1.7 oz/5-50ml(adjustable). The capacity of the hopper: 22 lbs/10 kg. They are filling accuracy is +/- 1%..
  • Stainless Steel Structure: Our manual liquid filling comes with a food-grade 304 stainless steel hopper, which is easy to disassemble and clean. Besides, the thickened piston ensures the fill more smoothly without plugging. The solid base keeps the machine sturdy, making the machine work steadily..
  • Reasonable Design: Designed with a high-quality anti-drip filling nozzle made of premium steel that is able to endure wear and high temperature, this lip gloss filler machine features precise filling. Filling volume and speed can be controlled manually through two screws. Please loosen the screws A1 and A2 to adjust the output..
  • Easy to Operate: Add the filling material to the hopper, adjust the filling volume, then use the handle switch to control and finish the filling. We recommend you clean the machine before using it. Just put aside the screw and upload the hopper. It is convenient to operate and clean this liquid filler with no fatigue..
Check Stock

BestEquip A03, Manual Liquid Filling Machine Stainless Steel, Bottle Filler 5-50ml for Paste Cream Cosmetic, 281212, white

  • Efficient Manual Filling: The liquid and paste filling machine are operated by manual power, providing an efficient and accurate filling with high speed. Filling speed: 20-30 times/min. Filling volume: 0.17-1.7 oz/5-50ml(adjustable). The capacity of the hopper: 22 lbs/10 kg. They are filling accuracy is +/- 1%..
  • Stainless Steel Structure: Our manual liquid filling comes with a food-grade 304 stainless steel hopper, which is easy to disassemble and clean. Besides, the thickened piston ensures the fill more smoothly without plugging. The solid base keeps the machine sturdy, making the machine work steadily..
  • Reasonable Design: Designed with a high-quality anti-drip filling nozzle made of premium steel that is able to endure wear and high temperature, this lip gloss filler machine features precise filling. Filling volume and speed can be controlled manually through two screws. Please loosen the screws A1 and A2 to adjust the output..
  • Easy to Operate: Add the filling material to the hopper, adjust the filling volume, then use the handle switch to control and finish the filling. We recommend you clean the machine before using it. Just put aside the screw and upload the hopper. It is convenient to operate and clean this liquid filler with no fatigue..
Check Stock

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe

  • For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity.
  • Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

VEVOR Pneumatic Liquid Paste Filling Machine 50-500ML Volume, Horizontal Cream Filling Machine with 30L Hopper, Pneumatic liquid Filling Machine for Water Oil Cream etc.

  • Accurate Pneumatic Filling: Our liquid filling machine is equipped with an excellent air cylinder, ensuring the precision of filling, Filling accuracy:≤±1%. In order to meet your various filling needs, adjustable speed and volume are necessary for this machine. Filling volume: 1.7-16.9 oz/50-500 ml.
  • Auto & Manual Control: Two control modes help you operate the machine efficiently. Pedal once and discharge once in manual mode while filling continuously in auto mode. With the advanced air pressure gauge, you can observe the pressure changes at any time and stop the machine if something goes wrong..
  • Stainless Steel Structure: Pneumatic filling machine is made of 304 stainless steel food-grade materials, which can endure corrosion, rust, acid, and alkali. The anti-drip nozzle is designed to avoid leakage and save more liquid during operation..
  • Well-Designed Details: Pneumatic filling with a delicate filling device, including conveying pipe and non-return valve. The soft valve has an excellent non-return effect.
  • make sure the liquid can be transferred to the pipe without blocking and filling successfully in the end..
  • Extensive Uses: This lip gloss filler machine is widely used in pharmaceutical, cosmetic, food, pesticides,....
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

VEVOR Horizontal Pneumatic Liquid Filling Machine 50-500ml, Pneumatic Bottle Filling Machine Single Head, Semi-automatic Liquid Filler 0.4-0.6MP Air Pressure for Oil Water Liquids

  • Accurate Pneumatic Filling: Our liquid filling machine is equipped with an excellent air cylinder, ensuring the precision of filling, Filling accuracy:≤±1%. In order to meet your various filling needs, adjustable speed and volume are necessary for this machine. Filling range: 1.7-17 oz/50-500 ml.
  • Auto & Manual Control: Two control modes help you operate the machine efficiently. Pedal once and discharge once in manual mode while filling continuously in auto mode. With the advanced air pressure gauge, you can observe the pressure changes at any time and stop the machine if something goes wrong..
  • Stainless Steel Structure: Pneumatic filling machine is made of 304 stainless steel food-grade materials, which can endure corrosion, rust, acid, and alkali. The anti-drip nozzle is designed to avoid leakage and save more liquid during operation..
  • Well-Designed Details: Pneumatic filling with a delicate filling device, including conveying pipe and non-return valve. The soft valve has an excellent non-return effect.
  • make sure the liquid can be transferred to the pipe without blocking and filling successfully in the end..
  • Various Application: This lip gloss filler machine is widely used in pharmaceutical, cosmetic, food, pestic....
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

YQSDG 1Pairs Front Rear Moulds Balustrades Mold for Concrete Plaster Cement PVC Plastic Casting Garden Pool Park Railing Balustrade Fence Decoration Construction

  • 【Tools for Craft Lovers】 It is designed for garden lovers who want to create their own beautiful gardens and patios, make their gardens or parks more beautiful.also suit for walkways,garden, park, pavement, and other outdoor places.
  • 【Easy to use】Built-in snaps, easy to use, no special skills required, even inexperienced and no additional equipment needed to create a beautiful balcony when filling out the form..
  • 【Purpose】Intended for the manufacture of heavy-duty colored concrete by vibratory casting method. It can be used for casting concrete and plaster..
  • 【Specifications】Material: PVC Color: White Dimension: 60x11X11CM/23.62"X4.33"X4.33".
  • 【Notice】We advise using high quality cement. It is recommended periodic cleaning of the form from the concrete. Not recommended for transportation of filled moulds in the process of hardening of concrete..
Check Stock

BEAMNOVA Electric Concrete Vibrator Handheld 11000 Vibration Per Minute 2HP with Shaft of 14-3/4 Feet

  • EFFICIENT & LONG REACH - BEAMNOVA concrete vibrator features of powerful 110V 60hz 1500W electric motor and vibrating head that gain speeds up to 11000 rpm. Vibrator shaft is of 1-1/2 diamter and the length is up to 14-3/4 ft. It helps to enlarge your work range and improve work efficiency..
  • USEFUL - Immerse the head of concrete vibrator into wet concrete to remove any trapped air and excess water to allow the concrete to settle within the formwork properly and solidly. Also you can use it to level the concrete..
  • USER-FRIENDLY DESIGN - Metal-Built Case is ot non-scrolling design, lightweight, rugged and durable, able to prevent cement from penetrating. The vibrating 1-1/2 inch head is capable of inserting into concrete via small holes or gaps. 14-3/4 ft vibrator shaft can reaches deeper and farther..
  • WIDE APPLICATION - It helps to remove air bubbles, and excess water and level the concrete. Great for patching and construction job, pouring process of cement pillars, onstruction of highway fence and bridge, pouring process of cement grape rack, etc..
  • Note: When the item doesn't work after staring, pls gently tap the head of the vibrator to engage it. If the machine still does not start after this operation, please kindly contact us. This machine can only b....
Check Stock

Polygem Liquid Concrete Repair (LCR) Kit Penetrating Injection Epoxy for Foundation & Concrete Crack Repair & Leak Prevention DIY Complete Kit Repairs Average Concrete Foundation Crack of 8 feet

  • Use for leak repair in basement concrete foundation repair, industrial and residential concrete floors, patios, sidewalks, balconies, pools and parking decks, reservoirs, tanks and more..
  • This product restores the structural integrity of the cracked wall by filling the crack with a high-strength adhesive that essentially "welds" the cracked wall together. This is not an expansion foam product..
  • Excellent adhesion to concrete, wood, fiberglass, and metal surface.
  • Wait 24-hours after applying epoxy paste to the crack for proper cure. After injecting the epoxy from cartridges, wait another 24-hours for full cure..
  • Each kit contains enough material to repair an average 1/16 inch wide, 8-foot crack in a concrete wall.
Check Stock