Reviews Concrete Anchor Assortment

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

amoolo 106pcs Concrete Anchors and Screws Assortment Kit for Drywall Concrete Wall Tile Ceramic Brick Cinder Block Etc with a Magnetic Screwdriver Bit and Masking Tape.

  • ...pacity】 Tungsten carbide drill bits with revolutionary pyramid design ensure hardness, resistance and drilling power. Industrial HCS screws are highly resistant to rust and corrosion. Nylon&PE compound material concrete anchors for higher strength and better resistance to aging..
  • -【Widely Applications】 The assortment kit includes most widely used sizes drill bits, concrete anchors and screws in home improvement. Satisfy all your demands on hanging pictures, paintings, mirrors, clock, photo frames, shelves, other small decorations on concrete walls, ceramic tiles, drywall, wooden wall, etc..
  • -【Warranty Policy】 If you are not fully satisfied for any reason, please contact us via amazon for 100% refund or replacement in 90 days..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check Stock

Sleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Champ Instant Floor Plate – for Installing Floor Anchor Pots in New Concrete Slab - Professional - Made in USA

  • STRUCTURAL REINFORCEMENT – It serves as permanent ground reinforcement underneath the concrete slab. Having this plate installed improves the anchor....
  • HELPS BALANCE THE ANCHOR POT – The Champ Instant Floor Plate is the perfect base, distributing the weight of the anchor pot while keeping the anchor....
  • EASY INSTALLATION – Use when pouring a new concrete floor for added strength. Simply install the Floor Plate onto each anchor pot, set anchor pots....
  • SAVE MONEY – This floor plate, along with the anchor pot and lid, is a complete anchoring system that makes do-it-yourself installations easier and....
  • HEAVY DUTY – Whether used in permanent installations or as a floor guide, these instant floor plates are strong and reliable. It is 100% steel, and....
Check Stock

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

  • Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
  • Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
  • The washer on the anchor retains the pin and guides it during the driving installation..
  • Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
  • 304 Stainless steel is durable and rust resistant.
Check Stock

Concrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated

  • CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
  • CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
  • SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
  • Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock