Reviews Computer Heatsink

Raspberry Pi 4 Fan, iUniker Raspberry Pi 4 Heatsink Fan Single Fan Cooling Fan and RAM Copper Heatsink for Raspberry Pi 4, Raspberry Pi 4B, Raspberry Pi 4 Model B

• Lower Cost than Dual Fan, Single Fan Version Heatsink Fan.
• It Can Compatible with Many Single Board Computer (Just pay attention to the Size of the Heatsink).
• Efficient drop temp of your Pi by using our heatsink fan..
• Custom 3M heat conductive strip can make sure your Pi works stable when you are overclocking..
• Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough..

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

• 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
• Cool your Raspberry Pi 4 without fans and noise..
• 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
• 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
• 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
• 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.

Geekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black (P173)

• Geekworm Raspberry Pi 4 passive cooling aluminum case - P173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
• Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case..
• Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable..
• Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation.
• Reserve the TF Card slot for easy access..
• Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..

Libre Computer Le Potato Mini Single Board Computer with USB WiFi 4 and Heatsink (2GB WiFi 4, Libre Blue)

• ...DMI video output. The green LED will turn on once the bootloader is detected. Please use a 5V 2A or higher MicroUSB power supply. Power supplies with insufficient power will experience voltage drops that cause instability and random application crashes or boot issues. For additional assistance, please use hub.libre.computer for guides and end-user support..
• COMPATIBILITY WITH PERIPHERALS DESIGNED FOR RASPBERRY PI: Most USB based peripherals are directly supported. The GPIO header maintains the same layout for hardware I2C, SPI, PWM, and UART compatibility. I2S, PCM, and SDIO do not share the same pins so most audio peripherals will need to be re-routed. Le Potato features additional GPIOs and SARADC pins on separate headers..

M.2 PS5 SSD NVMe Heatsink for Samsung 980 Pro 970 EVO Plus SN570 SN750 SN850 Firecuda 530 NVME or SATA m2 2280 SSD Cooling Heatsink, Black

• 【Upgrade Your Computer PS5 with M.2 NVME Heatsink】 Designed for new M.2 M key or B key disks, this M.2 SSD heatsink is perfectly work with M.2 2280 SSD, Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, 980 PRO,WD SN850 SN750 SN570, Firecuda 530, Crucial P2 Crucial P5 Plus, etc. The 2280 M.2 NVMe SSD heatsink helps to cool desktop PCs and PS5, releasing stress on the system so it can operate more efficiently..
• 【Aluminum Alloy Material】Aluminum alloy groove material can better help enhance the cooling area, the highest efficiency can reach 10°C – 30°C cooling effect, help the system cool down to avoid overheating and throttling, to help you improve the performance of your computer. (Please note that heat dissipation can vary depending on the environment).
• 【Easy to Install & Operate】Double-sided clips and 6 height adjustable screws. Suitable for M.2 SSDs with a minimum height of 12mm, easy and convenient to install and better protect your M.2 SSD during disassembly and installation..
• 【Three Nano Thermal Pads】Advancing Gene thermal pad is made of a unique nano-silicone material, which makes it better in thermal conductivity. The thermal conductive pad is soft enough and well ductile to be compatible with both uneven....

EZDIY-FAB M.2 SSD heatsink 2280, Double-Sided Heat Sink, High Performance SSD Radiator for PC / PS5 for PCIE NVME M.2 SSD or SATA M.2 SSD- Black

• Aluminum Alloy Heatsink with the most heat dissipation designed specially for 1x M.2 SSD 2280 DIY Desktop PC SSD.
• Aluminum alloy-Groove design, Double-sided cooling design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer..
• Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc..
• The use of high-coefficient phase change thermal silicon wafers greatly improves thermal conductivity. Long-term use of phase change materials, thermal conductivity will be better..
• EZDIY-FAB Heatsink is designed to be installed and removed fast and easily.

Aluminum Heat Sink 3.15 x 3.15 x 1 inch /80 x 80 x 27 mm Heatsink Radiator Circuit Board Cooling Cooler 26 Fins - Sliver

• Size: 80 x 80 x 27 mm /3.15 x 3.15 x 1 inch (L*W*H).
• Widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
• Use heatsink adhesive glue to install heatsink (Glue is not included).
• For bulk purchasing to get better pricing and discounts, contact the seller of this product model as soon as possible.

Smalloo 1.2'×80ft Double Side Adhesive Thermal Conductive Cooling Tape for Heatsinks, LED Lights, IC Chip, Computer CPU, GPU, Raspberry pi, Modules

• The 1.2"×80ft(wideth×length) double side adhesive thermal conductive tape for heatsink, like heatsink for LED, IGBT, IC Chip, Computer CPU, GPU, Modules, Raspberry pi, Electrically Insulated..
• The thermal conductive cooling tape thermal conductivity: glass fiber thickness 0.2mm, 1.5 W/m-k. Long term heat resistant 120°C, short term heat resistant 180°C.
• The thermal adhesive with the features of high thermal conductivity, insulation, strong stickiness, softness, compression..
• The thermal adhesive tape is simple and practical , Combined with thermal paste, the effect will be better and very easy to use..
• Double-sided thermal adhesive tape at low cost solve the problem of heat dissipation, it is great helper to solve heat dissipation for many electronics products..

Easycargo Laptop M.2 Heatsink Kit, Copper Heat Sink + High Performance Nano Thermal pad 1mm 0.5mm for Cooling PC Laptop M2 2280 SSD NVMe (4-Set)

• PS5 and Laptop Memory SSD NVMe m.2 2280 copper heatsink kit..
• [Main Body Material: Copper]. Thermal conductivity: 401W/mK.
• Dimension: 76mmx22mmx1mm/ 3.03' x 0.86' x 0.04' (L*W*T).
• [Greatly increase the heat dissipation area], Special design for cooling your Laptop RAM to a safe temp to avoid overheating and throttling, improve your computer's performance..
• [Unique High Performance Thermal Tape]: Nano thermal tape for efficient heat conductivity..
• Each pack includes: 1 piece Laptop m.2 2280 copper heatsink + Nano thermal pad in two thicknesses 70x22x1mm and 70x22x0.5mm..

PNY XLR8 CS3140 4TB M.2 NVMe Gen4 x4 Internal Solid State Drive (SSD) - M280CS3140-4TB-RB

• Upgrade your M.2 PCIe Gen4 enabled computer to enjoy the extreme performance you demand.
• The NVMe PCIe Gen4 x4 interface delivers exceptional performance of up to 7,500MB/s seq. read and 6,850MB/s seq. write speeds.
• slower when equipped in PCIe Gen3 x4 motherboards.
• The enhanced bandwidth of the NVMe Gen4 interface allows for extreme performance and low latency, making it superior to SATA based SSD’s.
• Ultra high performance is ideal for demanding applications, high-end games, and intense workloads.
• Backed by a 5-Year Limited Warranty or TBW with support from our US based technical support team.
• Expand your PS5 storage with the XLR8 Gaming CS3140 non-heatsink model by adding a heatsink that meets Sony’s requirements..

Dell Laptop NPPGP AMD Heatsink and Fan DFS501105FQ0T Inspiron 7520 5520

M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink with Thermal Silicone pad for PS5/PC PCIE NVME M2 SSD(Black）)

• 【Designed for desktop PC/PS5】- Perfectly fit for Samsung 860 EVO, 960 EVO, 970 EVO, 970 Pro, 980 Pro, PS5 etc. this M.2 SSD heatsink compatible with all single sided Type..
• 【Main body material】- Aluminum alloy, silver plating (helps eliminate static electricity), anodic oxidation surface treatment. Dimensions: 3 x 0.95 x 0.4inm.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
• 【Thermal Pads】- with good thermal conductivity ability. Low viscosity, with no damage to the M.2 SSD..
• 【High Performance】- With 10°C - 20°C cooling effect (varies depending on the environments), cool your M.2 2280 SSD to a safe temp to avoid overheating and throttling, improve your computer's performance..
• 【Easy to Install 】 - With double-sided clip design, are suitable for M.2 NVME SSD of various heights, stable installation, better protection of your M.2 SSD with good heat dissipation performance..

4Pcs 40mm Gpu Heatsink Kit 40 x 40 x 20mm /1.57 x 1.57 x 0.79 inch Aluminum Peltier Cooler Heat Sinks Small Cooling Fin for 3D Printers, TEC1-12706 Thermoelectric Cooler, Chipset CPU LED Power A

• Size: 40 mm x 40 mm x 20 mm/ 1.57 x 1.57 x 0.79 inch (L*W*T).
• Pure aluminum heat sink, which is suitable for electronic, computer, electrical facilities, play a cooling effect..
• Use heatsink adhesive glue to install heatsink (Glue is not included)..
• For bulk purchasing to get better pricing and discounts, contact the seller of this product model as soon as possible..