Reviews Compute Chassis

Cooler Master MasterCase NC100 White SFF Small Form Factor 7.9 Liter Case with V650 SFX Gold PSU, GPUs 2.5 Slots up to 320mm for Intel(r) NUC 9 Extreme Element

  • Intel(r) NUC 9 Extreme Compute Element Compatible: The first Intel(r) NUC 9 Extreme Compute Element chassis with full-length GPU compatibility.
  • Ultra-Compact 7.9-Liter Internal Volume: The compact 7.9 liter allows a full-size GPU compatibility and better thermal performance.
  • Full-Length GPU Support: Supports all modern GPUs up to 2.5 slots in thickness with a length of up to 320mm..
  • Fully Accessible Design: Opened from all sides to provide access to the components inside from all angles for easier accessibility.
  • Excellent Cooling Capability: Two slim 92mm fans immediately exhaust hot air from the enclosure, granting excellent thermal performance.
Check Stock

Compute Module DSI Display Adapter, 22PIN to 15PIN Adapter, for Official Compute Module 4 IO Board and Waveshare Compute Module IO Board,Compute Module IO Board Plus

  • Compute Module DSI display adapter, 22PIN to 15PIN, allowing the Compute Module to use 15PIN DSI displays.
  • Suitable for Compute Module IO Board,connecting with Compute Module 4 IO Board.
  • Suitable for connecting with Waveshare Compute Module IO Board Plus.
  • Support all Waveshare DSI LCD, such as 4.3inch DSI LCD,5inch DSI LCD,4.3inch DSI LCD (with Case).
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

Metal Case/Box with Cooling Fan for Raspberry Pi Compute Module 4 IO Board, Mini Computer Chassis with HDMI,Ethernet,USB ,DSI Display Port, CSI Camera Port

  • This Metal Box is designed for Raspberry Pi Compute Module 4 IO Board, Mini computer chassis, robust and dust-proof, nice looking..
  • Make it easy to build your own Raspberry Pi CM4 mini PC. Precise cut-out with clear label,each cut-out is completely aligned with the connector.
  • Comes with cooling fan, combined with the airflow vent, better heat dissipation.
  • Wall mount holes on two sides, handy for mounting..
  • Suitable for binocular vision or Raspberry Pi applications or other industrial occasions that require PoE network port power supply.
Check Stock

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

  • 【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
  • 【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • 【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
  • 【FAN Header】5V/12V, allows speed adjustment and measurement.
  • 【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.
Check Stock

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna

  • Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4:Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
  • For CM4 & based board:matching with the CM4 on size and mounting holes, fast heat dissipation.
  • Notched for antenna section:no hindrance to the antenna.
  • Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
  • Note: Only HEATSINK,not include base board.
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

AMD FIREPRO W7000 4GB GDDR5

  • Next-generation architecture designed to effortlessly balance GPU compute and 3D workloads efficiently..
  • Exceptional compute performance with more than 2.432 TFLOPS single precision and 152 GFLOPS double precision..
  • Optimized and certified for leading workstation ISV applications..
  • GeometryBoost technology provides ultra-high geometry performance..
  • Up to 4 native display outputs using AMD Eyefinity technology. Up to six display outputs using DisplayPort HBR2 and MST compliant displays with resolutions up to 2560x1600 each..
Check Stock

7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor

  • 7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
  • Capacitive touch panel, support 5-point touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
  • Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
  • DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..
Check Stock

Intel Compute Stick CS125 Computer Atom x5 Processor and Windows 10 (BOXSTK1AW32SCR)

  • 1.44 GHz Intel Atom x5-Z8300 Quad-Core, 2GB of DDR3L RAM.
  • Intel HD Graphics, HDMI / USB 2.0 / USB 3.0.
  • Micro-SDXC Memory Card Slot, 802.11ac Wi-Fi, Bluetooth 4.0.
  • Multi-channel Audio, Space-saving Design.
  • Windows 10DescriptionA new way to plug into home entertainment, the Intel Compute Stick lets you transform any HDMI display into a full computer. Loaded with Windows 10 and ready to go out-of-the-box, the newly redesigned Intel Compute Stick has a quad-core Intel Atom x5 processor for the performance, quality, and value you expect from Intel..
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock

Waveshare Mini Base Board (A) Designed for Raspberry Pi Compute Module 4 Suitable for Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

  • Mini base board designed for Raspberry Pi Compute Module 4, suitable for evaluating the raspberry pi CM4 or being integrated into end products.
  • Compared with version B, there're NO RTC, Fan controller, and battery holder on version A, which is more cost effective.
  • Standard Raspberry Pi CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • Onboard multiple connectors including: CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot.
  • Comes with mounting screw, easy to install. When using the M.2 interface, please use the matching screws..
Check Stock

Waveshare Mini-Computer Add-ons Based on Raspberry Pi Compute Module CM3 / CM3L / CM3+ / CM3+L Comes with PoE Expansion Board

  • The Add-Ons Include: Expansion Board, Metal Case, Power Supply, And Cooling Fan. Easily Make A Mini-Computer If You Happen To Get A Compute Module.
  • Compute Module PoE Board: Dual CSI Camera Ports, PoE (Power Over Ethernet) Feature, Versatile Peripheral Interfaces.
  • Ingenious Cut-Out, Highly Matching The Master Board, Along With Clear Labels, Easy To Use.
  • Comes With Cooling Fan, Allows Being Controlled By Software Via GPIO, Or Being Powered Directly From 5V Supply.
  • Smooth And Clean Metal Bottom Surface, With Mounting Holes On Both Sides, Suitable For Industrial Applications.
Check Stock