Reviews Compressor Shaft Seal

5 HP 3450 RPM R56Y Frame 208-230V Air Compressor Motor - Century # B384

  • Price For: Each Motor Shaft Design: Keyed Hz: 60 Motor Bearings: Ball Motor Shaft Rotation: CCWSE Phase: 1 Ins. Class: B Full Load Amps: 22.0 Motor Mounting Type: Rigid Base Shaft Length: 2-1/4″ Max. Ambient Temp.: 40 Degrees C Capacitor Included: Yes Motor Application: Air Compressor Motor Enclosure Design: Open Dripproof Item: Air Compressor Motor.
  • Nameplate RPM: 3450 HP: 5 Motor Thermal Protection: Manual Motor Design: Capacitor-Start/Run Shaft Dia.: 7/8″ Duty: Continuous Voltage Compatibility: 115/208-230, 208-230, 208-240 Motor Service Factor: 1.15 Frame: 56Y Voltage: 208-230 Overall Length: 14-5/8″ Country of Origin (subject to change): China.
Check Stock

Marathon B317 Fan and Blower Motor, Single/Split Phase, 1/2 hp, 1725 RPM, 115/208-230V, 8.0/4.1-4.0 amp

  • 7.5 HP Electric Motor: The heavy-duty electric compressor motor features output 7.5 HP, single-phase, easy to carry, changed from CCW to CW is the exchange of 5 and 8..
  • Working Efficiency: The compressor motor 184T can run at the maximum speed 3450 RPM, high working efficiency, shaft diameter: 1-1/8'' (2.86 cm), shaft length: 2.75'' (6.99 cm)..
  • Steel Housing: The compressor duty motor is made of high-quality steel material, and it can protect the engine well.
  • it includes the mounting bracket, the bracket structure is stable..
  • Fast Heat Dissipation: The air compressor motor has multiple heat dissipation holes so that it has excellent heat dissipation performance. It can prevent foreign objects from being caught in the motor..
  • Multiple Application: Air compressor motor is suitable for air compressors, steel industry, construction industry, water pump industry, fan industry, refrigerators, medical equipment, etc..
Check Stock

Pacer Pumps 58-0714 12 S Series EPDM Water Pump Shaft Seal Kit With Seal and O-Ring

  • The Pacer Pumps water pump shaft seal kit 58-0714 12 includes the primary shaft seal and secondary O-ring..
  • This shaft seal kit is suited for all polyester Pacer S Series and Pacer Pumps with EPDM..
  • The 58-0714 12 Pacer shaft seal kit’s mechanical seal face is made from a durable carbon-ceramic, while the O-ring is made from wear-resistant EPDM..
  • As with all Pacer pump parts, the contents of the 58-0714 12 shaft seal kit are built for superior resistance to chemicals and corrosion for use in a range of commercial and residential applications..
  • The pump shaft seal kit is designed for easy installation onto the water pump for reduced downtime and increased efficiency..
Check Stock

Lisle 58430 Shaft Type Seal Puller

  • Removes Cam Shaft and Crank Shaft Seals Without Damage to the Shaft.
  • Engage the adjustable hook behind the seal.
  • Brace the push rod against the engine head and push the handle to remove the seal.
  • Removes the seal without damage to the shaft.
Check Stock

NEW 2 HP SPL Compressor Duty Electric Motor, 3450 RPM, 56 Frame, 5/8\ Shaft Diameter,120/240 VOLT

  • 2 HP SPL COMPRESSOR DUTY ELECTRIC MOTOR, ODP (OPEN DRIP PROOF) FOR DRY INDOOR ENVIRONMENTS.
  • 1 PHASE, 56 FRAME, 3450 RPM, 120V/240VAC, 5/8" SHAFT DIAMETER.
  • CAPACITOR START AND CAPACITOR RUN CONTINUOUS DUTY COMPRESSOR MOTOR.
  • Amperage: (7.5 FLA @ 240V) (15 FLA AT 120V), Voltage: 120V/240V (NOT SUITED FOR 208V INCOMING).
  • CCW (COUNTER CLOCKWISE ROTATION) WHEN VIEWED FROM SHAFT END. MODEL: 56S34D2M EMZ BRAND AND EMZ INDUSTRIES INC.
Check Stock

NEW 5HP COMPRESSOR DUTY ELECTRIC MOTOR, 56HZ FRAME, 3450 RPM, 7/8\ SHAFT DIAMETER, NEMA RATED MOTOR

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine....
Check Stock

HaroldDol AC Air Compressor With Clutch YCC257，Air conditioning compressor Replacement For 2011-2016 F250 F350 F450 F-550 6.7 6.7 Diesel

  • 【APPLICATION】B A/C Compressor Clutch Remover Installer Puller Tool Kit, is used to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors and fit for GM, fit for Ford, fit for Chrysler, imports, and others.
  • 【EASY TO USE】Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads.
  • 【HIGH-QUALITY】A/C Compressor Clutch Remover is made of stainless steel with a black coated finish, durable and long lasting.
  • Resists rust and corrosion under proper care and lubrication.
  • 【PACKAGE INCLUDED】This kit includes puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • 【CARRYING CASE】Comes with a carrying plastic carrying case for easy organization, storage, and transport.
Check Stock

Basic Repair Kit & Seal for Suntec A2VA7116 A2VA3006 A1VA7112 Oil Burner Pumps

  • BASIC Suntec Pump Repair Kit For Most Suntec & Beckett Model "A" Series Pumps. Includes most common failed parts - Seal, Internal Diaphragm, Cover Gasket and Strainer..
  • Seal is 7/8" diameter x 1/4" high x 5/16 diameter shaft. Diaphragm Fits on top of gear set. Be sure to spin shaft by hand while tightening the gear set..
  • Cover Gasket is full coverage, keeping contaminants out of the gear set..
  • The Lip Seal, Shaft Seal DOES NOT fit early bronze nosed, face seal pumps, such as 7016 & 7012..
Check Stock

Mophorn 5HP Electric Compressor Motor, 3450RPM 143T/56 Frame Single Phase 7/8\ Shaft Diameter Air Compressor Motor 208-230V 60Hz AC Electric Motor

  • Powerful Ac Motor: The compact and small-sized electric compressor motor features output 5HP, 143/5T Frame and single phase. Robust and reliable metal material shell protect the inner circuit from thermal overloading..
  • 3450 Rpm High Speed: The compressor duty motor can run at the rated speed 3450 RPM with high working efficiency. Runs with 5HP. Shaft Diameter: 7/8" (2.5 cm), Shaft Length: 2.36" (6 cm)..
  • Fast Heat Dissipation: The air compressor motor has multiple heat dissipation holes so that it has excellent heat dissipation performance. It can prevent foreign objects from being caught in the motor..
  • Manual Overload Protection: The heavy-duty electric motor adopts capacitor housing and conduit boxes to protect all environments, and the low temperature manual overload protector protects against extreme overload..
  • Mounting Bracket Included: Robust mounting bracket in included in the package, used for enlarging the motor's stability and reducing any friction. Ball bearing system is also applied for multiple applications..
Check Stock

3450RPM 5HP Air Compressor Motor P56 Frame Single Phase Motor for 208-230 Volts Electric Air Compressor Motor

  • ❤【Great Function】--High working efficiency. The maximum speed at which the compressor motor 56 can run is 3450RPM, which greatly improves the efficiency of the work and saves your working time..
  • ❤【Long service life】--The air compressor motor is designed with multiple heat dissipation holes with good heat dissipation performance, which can quickly dissipate heat, prevent the machine from being damaged by overheating, and prolong the service life of the motor.
  • ❤【Premium Quality】--The housing and mounting bracket are made of high quality steel, which can well protect the motor from the external environment, ensure the stability and durability of the motor, and prevent the bracket from being unstable and dropping the motor..
  • ❤【Buy Confidence】-- For any reason you're not completely satisfied. Please feel free to contact us, we will solve the problem for you at the first time. Buy it with confidence!.
Check Stock

3pcs/Pack Brass Mini Ball Valve Shut Off Switch 1/4" NPT Male x 1/4 INCH NPT Female Rated to 600WOG for Water Air Compressor Etc

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

Bonbo Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C & ST-1503 for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

  • J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions..
  • 1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions..
  • Great Function – This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation..
  • Direct Replacement – 1503 Stator Shaft Teflon Seal Installer/Resizer is alternative to Atec Trans-Tool T-1503, #39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal Installer/Resizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M..
  • Superior Quality – Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones..
Check Stock