Reviews Compressed Air Dryer For Plasma Cutter

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 1/2 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapter, Air Filter Regulator, Protective Mask and Gloves, Consumables, Instruction Manual, Etc. (Ceramic Cup, Ceramic Ring, Hose Clamp, Electrode, Bolt, Nozzles, Throat Hoops, etc.).
Check Stock

3/4 Compressed Air In Line Filter Desiccant Dryer Moisture Water Separator New

  • Brand new 3/4" NPT compressed air moisture filter desiccant dryer unit. Also included is two refills of desiccant beads..
  • his filter / desiccant dryer removes water, oil and humidity from compressed air. The desiccant bead dryer will remove water and humidity in the compressed air..
  • These desiccant beads change color from blue to a light pink when they are saturated and need to be changed. This has a heavy duty aluminum quick release bowl for easy maintenance that provides easy viewing for contents as well as impact protection..
  • More replacement desiccant beads are available in our (Regulators, Filters & Oilers) ebay store category..
  • Great for painting, plasma cutters, sandblasting and more!.
Check Stock

SPELAB 2.5 Inch Stainless Steel Exhaust Pipe Kit

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
Check Stock

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pr....
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, 1/2 Inch Clean Cut, Brown & PCS22 Plasma Cutter Consumables Sets for Brown Color LTP5000D and Brown Color LTPDC2000D (22)

  • ...ly cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Product 1: ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • Product 1: ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33".
  • ★ NOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set.
  • Product 1: ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
  • Product 2: Only Compatible with BROWN Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: NOT Compatible with Red Color Lotos LTP5000D, LTPDC2000D..
  • Product 2: Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide.
Check Stock

Forney Easy Weld 251 20 P Plasma Cutter,Green, 20 Amp

  • CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel).
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze.
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts.
  • LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible.
  • RUGGED- All metal case. Built to take the day to day.
  • MACHINE INCLUDES- Includes a 13' cutting torch, 8' ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 15.125" (384.18 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters) Weight: 21.5 lbs. (9.75 kilograms) Air compressor capable of 1.5 CFM is required (not included).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine

  • ...n better. And the machine adopts a brand-new digital panel, which is easier to set up and operate. It is still an automatic dual voltage dual frequency (110/220V, 50/60HZ)..
  • ❆ 10-40Amp Plasma Cutter: 40amp plasma cutter current output @220V. Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ❆ PULSE TIG Welder: 10-180A Pulse TIG Welder Electric Current Output @ 220V. Quality TIG welding on stainless steel, nickel alloys, copper, brass and bronze etc. The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life..
  • ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
  • Deep weld pool and beautiful welding shape..
  • ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch consumables..
Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

  • ✅【Plasma Cutter】10-50Amp DC current output. The cutting machine offers a variety of welding and cutting abilities.
  • Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
  • The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
  • ✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
  • ✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
  • ideal for a welding enthusiast or hobbyist with....
Check Stock

Makita XCS01Z 18V LXT Cordless Rebar Cutter

  • .... Better cutting quality and longer consumable life..
  • ★ & : Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ : The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min..
  • ★ & : 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
  • ★ : We offer a - , - - , please submit warranty registration form on our website. - customer service(via phone/email) is ....
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock