Reviews Combination Plunge And Bevel Bits

Bosch PROFACTOR GKT18V-20GCL 18V Cordless 5-1/2 In Track Saw with BiTurbo Brushless Technology and Plunge Action Battery Not Included

  • COMPACT, POWERFUL, CORDLESS TRACK SAW: provide jobsite mobility and corded-like performance in wood and wood-based sheet goods.
  • PLUNGE MECHANISM: allows for precise plunge cuts with accurate depth of cut.
  • SINGLE BEVEL PIVOT POINT: when using track (sold separately), it can be positioned in the same for bevel cuts or non-bevel cuts.
  • BITURBO BRUSHLESS TECHNOLOGY: a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power....
  • ECO MODE: extends the battery runtime by up to 30%, for getting work done.
Check Stock

Makita RT0701CX3 1-1/4 HP Compact Router Kit

  • ...ient depth adjustments and base removal/installation.
  • Accepts industry standard template guides.
  • Electronic speed control maintains constant speed under load.
  • High visibility base design for improved handling and performance.
  • Base can be removed quickly to install other bases (plunge, tilt and offset).
  • Heavy duty aluminum motor housing engineered for increased durability.
  • Shaft lock for quick and easy bit changes.
  • Durable flat top design for added convenience when changing bits.
  • Non-marring high-durability base insert for increased work piece protection.
  • Ideal for routing small profiles, dovetailing, door hinges and more.
  • 1-3/8 plunge depth capacity for easy penetration into workpiece.
  • Easy-to-use fine depth adjustment with 3 preset depth stops for added precision.
  • Conveniently located plunge lock lever for operator convenience.
  • Removable clear plastic shield helps protect the operator from airborne debris.
  • Sub-base accepts industry standard template guides for convenience.
  • Fits compact routers models RT0700C and RT0701C.
  • Tilt base for routing at different angles (-30° to 45°).
  • Allows different profiles when using the....
Check Stock

Bosch Parts 2610915125 Insert Ring Set

  • Robust variable-speed palm Router construction – Made to provide precision and power with a 1.25 horsepower (max.) Motor, advanced electronics, high-performance bases & Proven ergonomics.
  • Powerful 1.25 HP (max), 7.0 amp motor – delivers abundant power for routing and trimming applications.
  • Ground-breaking fixed-base depth-adjustment system – ensures precise depth adjustment.
  • Rugged fixed base 360° (non-split) aluminum base housing with wide-bit capacity — Accepts bits up to 1-5/16 in. Wide.
  • Smooth-action plunge base – provides a spring-lock plunge control lever for easy plunge action.
Check Stock

Makita RT0701CX7 1-1/4 HP Compact Router Kit

  • ...uty aluminum motor housing engineered for increased durability.
  • Shaft lock for quick and easy bit changes.
  • Durable flat top design for added convenience when changing bits.
  • Non-marring high-durability base insert for increased workpiece protection.
  • 0 - 1-3/8 plunge depth capacity for easy penetration into workpiece.
  • Easy-to-use fine depth adjustment with 3 preset depth stops for added precision.
  • Ideal for routing small profiles, dovetailing, door hinges and more.
  • Conveniently located plunge lock lever for operator convenience.
  • Removable clear plastic shield engineered to reduce airborne debris.
  • Sub-base accepts industry standard template guides for convenience.
  • Fits compact routers models RT0700C and RT0701C.
  • Powerful 1-1/4 HP (maximum) Motor Delivers Improved Performance.
  • Variable speed control dial (10,000 - 30,000 RPM) enables user to match the speed to the application.
  • Smooth rack-and-pinion fine depth adjustment system for more precise settings.
  • Slim and ergonomically designed body for increased co....
Check Stock

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Makita RP0900K 1-1/4 HP* Plunge Router

  • 0" - 1-3/8" plunge depth capacity for easy penetration into work piece.
  • Plunge depth adjustment lever with 3 pre-set depth stops for added precision.
  • Oversized ball bearing construction for longer tool life.
  • Durable flat top design for added convenience when changing bits.
  • Rubberized contoured handles with built-in switch for better fit and control.
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Stalwart - RBS024 Router Bit Set- 24 Piece Kit with ¼” Shank and Wood Storage Case By (Woodworking Tools for Home Improvement and DIY) Wood

  • EASY TO STORE- The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • SET INCLUDES- 1/2 mortising bit, 1/2 combination bevel bit, 3/8 dovetail bit, 1/2 dovetail bit, 1/2 90 degree V-groove bit, 3/8 round nose bit, 1/2 round nose bit, 3/8 trimming bit, 1/4 panel pilot bit, 1/4 straight bit, 3/8 straight bit, 1/2 straight bit, 3/4 straight bit, 1/2 flush trim bit, 1/8 radius round over bit, 3/16 radius round over bit, 1/4 radius round over bit, 3/8 radius round over bit, 1/4 cove bit, 3/8 cove bit, 1/2 45 degree chamfer bit, 1/4 Roman Ogee bit, 1/4 slot cutter bit, 1/2 rabeting bit, wood case.
  • Router bit bits set tongue and groove wood doors flooring shaker door routers panel shank joint 1 2 storage kit holder for cabinet sets inch case box plywood tool tools accessories DIY home improvement.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Bosch GKF125CEPK Colt 1.25 HP Max Variable-Speed Palm Router Combination Kit Blue 5.8 x 11 x 10.5 inches

  • Robust variable-speed palm Router construction – Made to provide precision and power with a 1.25 horsepower (max.) Motor, advanced electronics,....
  • Powerful 1.25 HP (max), 7.0 amp motor – delivers abundant power for routing and trimming applications.
  • Ground-breaking fixed-base depth-adjustment system – ensures precise depth adjustment.
  • Rugged fixed base 360° (non-split) aluminum base housing with wide-bit capacity — Accepts bits up to 1-5/16 in. Wide.
  • Smooth-action plunge base – provides a spring-lock plunge control lever for easy plunge action.
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

TACRAY Titanium Bevel Gauge for Knife and Axe (Angle Protractor Range 15°-40°), Multi-FunctionalTools with Screwdrivers (T6/T8) and Small Straight Scale in Centimeters/Inches

  • 【High Quality Materail】This tool is made in titanium alloy material except for the bits, never gets rusted, non-corrosive, 4 times strength of stainless steel, durable use..
  • 【Multi-functional Tools】5 in 1 tool, including bevel gauge for knives and axes, flat/Phillips (T6/T8) screwdrivers, small stright scale in both centimetre and inch. When not use the bits, please put them back into the slots and revolve the silver button so as to avoid the bits falling off..
  • 【Specs for bevel gauge】It measures 15°/20°/25°/30°/35°/40°. Handy for quickly checking a blade's cutting angle.
  • 【Size & Weight】Size: 50*25.4mm, weight: 31.7 grams. Small sized and lightweight for EDC..
  • 【Customer Guarantee-100% Satisfaction】If you are not satisfied with our product, please leave messages to us. We will check if there is any confusion or misunderstanding there, and then arrange the replacement if it is caused by the quality..
Check Stock

WEN RT6033 15-Amp Variable Speed Plunge Woodworking Router Kit with Carrying Case & Edge Guide

  • Powerful 15-amp variable speed soft start motor provides speeds from 8, 000 to 23, 000 RPM.
  • Plunging base locks in downward position for functionality as both a plunge and a fixed Router.
  • Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches.
  • 7-Stop turret combined with both macro and micro-adjustment dials maximize precision.
Check Stock