Reviews Combination Drill And Taps

6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits

  • TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
  • THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
  • USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
  • APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
  • GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

uxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

  • PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
  • DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
  • HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
  • MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
  • HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..
Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

  • Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
  • This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
  • Storage case is lightweight and durable for easy storage and is portable for all job environments.
Check Stock

Acrux7 14mmx1.5 HSS Right Hand Thread Tap, Metric Thread Tap, Thread Milling Tap M14 X 1.5mm Pitch

  • 【MATERIAL】-Made of made of high speed steel and are good for most general purpose applications,offering a combination of hardness and toughness for wear resistance.
  • Standard thread design,clear and tidy,provide rapid chip removal for efficient threading.
  • 【FEATURE】-Straight flute taps are used for through hole and shallow blind hole tapping.
  • Adjustable forward and reverse,ratchet rotation,compact and convenient.
  • 【NOTE】-Before tapping,confirm whether the diameter of the round hole is appropriate.
  • If the hole is too small for tapping,the tap will wear out more unnecessary,which will increase the risk of tap breakage.
  • 【APPLICATION】-The taps are used formanual equipment or special processing consoles,such as tapping machines,drill-in-one bench drills etc.
  • With this tap,you can finish tapping on stainless steel,iron,aluminum,copper,general steel and other materials.
Check Stock

Deluxe Maple Tree Tapping Kit (3) Taps with Hooks (3) 3 Gallon Sap Buckets with Lids, Drill Bit, (2) 1-Quart Sap Syrup Filters, Recipe Cards, 80 Page Guide to Maple Tapping Book

  • MADE IN NORTH AMERICA. Deluxe kit includes (3) Taps with Hooks (3) 3 Gallon durable sap buckets with lids.
  • 80 Page Illustrated Guide to Maple Tapping Book.
  • THREE PLASTIC 5/16" FOOD GRADE TREE SAVER MAPLE TAPS. Reusable taps. LIFETIME GUARANTEE ON TAPS. Our 5/16" tree saver taps cause 30-35% less damage trees compared to traditional 7/16" spiles but with the same output.
  • THREE DURABLE 3-GALLON FOOD GRADE BUCKETS WITH LIDS. Our premium buckets and lids are ultra-high impact and heat and UV stabilized. Buckets and lids are built to resist heavy impact even at low temperatures.
  • (2) 1 QT. PRE-FILTERS FOR MAPLE SAP COLLECTION. Also includes (1) 5/16” drill bit for drilling trees, and 5 RECIPE CARDS, with our favorite family syrup recipes. Maple tapper is a small, family-owned. Making our own maple syrup since 1975.
  • 80 PAGE GUIDE TO MAPLE TAPPING BOOK shows you how to identify the right trees, how to get started tapping and advice from professional sugarmakers. FOR BEGINNERS OR EXPERIENCED MAPLE TAPPERS.
Check Stock

General Tools 90 Pin Vise, Double End

  • IDEAL FOR: Securely holding small stock, taps, drills, reamers, scribers, wire, files and other tools...
  • RECLAIM TIME: Help to reclaim precious time that is normally spent switching between tool attachments or searching for drill bits in a crowded toolbox..
  • REVERSIBLE COLLET: Each end of this Pin Vise features a reversible collet for holding your favorite drill bits, taps and reamers..
  • LIKE HAVINg TWO TOOLS: Now you can drill a small hole with one end of the tool, then flip to the other end for quick deburring or reaming..
  • HOLLOW INTERIOR: The tool features a knurled body for a comfortable grip and a hollow interior for use with long wire or rods..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ...hreading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

CS Unitec 3/4' Weldon Tap Holder for 1/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 1/4)

  • FAST TAPPING: Adapter for 1/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
  • NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
  • 3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
  • COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
  • HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).
Check Stock

CS Unitec 3/4' Weldon Tap Holder for 3/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 3/4)

  • FAST TAPPING: Adapter for 3/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
  • NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
  • 3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
  • COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
  • HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).
Check Stock