Reviews Colour Machinery

EPLZON A3144 Hall Effect Sensor 3Pins Magnetic Detector for Arduino (Pack of 20 pcs)

  • Output reverse breakdown voltage: Vce 50V..
  • ✅Operating temperature range: -40℃ to 125℃.
  • Storage temperature range: -55～150℃..
  • ✅Good performance: small size, high sensitivity, fast response, good temperature performance, high precision and high reliability..
  • ✅Application areas: Non-contact switch, automatic ignition, brake circuit, position, speed detection and control, safety alarm device, textile control system,Brushless DC motors, encoders, sewing equipment, textile machinery, household appliances,safety alarm devices and other automation control fields..
Check Stock

LBY 60pcs Wing Nuts M3/4/5/6/8/10 Wingnut Butterfly Wing Nuts Assortment Kit Hand Twist Tighten Ear Butterfly Nut 6 Sizes Stainless Steel Silver

  • 1. Wingnuts butterfly nuts, hand twist screw butterfly nuts..
  • Screw hole diameter: 3mm/4mm/5mm/6mm/8mm/10mm..
  • each size contains 10 pieces, a total of 60 pieces..
  • 5.Use: widely used in machinery,electronic equipment, communication equipment, ships etc..
Check Stock

10Pcs 49E OH49E S49E SS49E TO-92 Linear Hall Effect Sensors Magnetic Detector 3 Terminal Sensitive for Electric Vehicle Motor Repair Applications

  • Package includes: 10PCS Hall effect switch sensor..
  • Operating temperature range: -40 to 85 degrees Celsius. Colour: Black..
  • Good performance: small size, high sensitivity, fast response, good temperature performance, high precision and high reliability..
  • Application areas: Brushless DC motors, household appliances, sewing equipment, textile machinery, encoders, safety alarm devices and other automation control fields..
Check Stock

Creatyi 2 PCS Latest Model 6.3'' Rubber Flexible T-Handle Draw Latches,for Tool Box,Cooler, Golf Cart, Engineering Machine Hood or Farm Machinery

  • Material: Flexible Rubber and Nylon.Colour: Black.
  • T-Handle Latch body made of high quality elastomer to reduce vibration ,apply prepressing.
  • T-Handle latches are with good elastomeric to reduce vibration but keep the preloading for the joint thing..
  • Self aligning, UV resistance, non-corrosive.
  • The T-handle latch normally are installed in toolbox, cooler, construction equipment, off-road vehicles,engineering machine hood, farm machinery, golf cart and so on..
Check Stock

LBY 120pcs Wing Nuts M3/4/5/6/8 Wingnut Butterfly Wing Nuts Assortment Kit Hand Twist Tighten Ear Butterfly Nut 5 Sizes Carbon Steel Galvanized

  • 1. Wingnuts butterfly nuts, hand twist screw butterfly nuts..
  • Screw hole diameter:3mm,4mm,5mm,6mm,8mm..
  • M3 30 pieces,M4 30 pieces,M5 30 pieces,M6 20 pieces,M8 10 pieces, a total of 120 pieces..
  • 5.Use: widely used in machinery,chemical industry,construction, electricity, textile, sports equipment,paper,sewage treatment,automotive,medical equipment, chassis circuits, electronic equipment, communication equipment, ships etc..
Check Stock

Anti-Rotation Bracket 0

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

E-outstanding Wing Nut 20PCS 1/4Inch-20 Black Carbon Steel Wing Nuts Female Knobs Fastenings Hardware Fitting

  • This nut has wings on both sides, which can be tightened or loosened by hand, and can be carried out quickly and frequently..
  • Designed for projects that do not require tools.
  • mainly used for home and office equipment, communication equipment, automobile industry, ship assembly and other machinery industrial equipment that require frequent disassembly and maintenance..
  • Fine workmanship, smooth surface without burrs, complete and deep threads, uniform stress, not easy to slip, strong and durable, common on components that need to be adjusted or are not permanent..
  • Made of high-quality galvanized carbon steel, environmental protection, high hardness, no deformation, anti-rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life..
  • Diameter: 1/4Inch.Thread: 20.Colour: Black.Package includes: 20PCS 1/4Inch Wing Nuts..
Check Stock

Centerforce N1747 Centerforce ® Accessories, Throw Out Bearing / Clutch Release Bearing \88 Buick Century 2.8L ( 173 ci )\

  • Mainly used for textile machinery, printing machinery, automotive industry, household appliances and more..
  • Enough room for grease to store with a longer relubrication interval..
  • High quality bearing steel, durable with high hardness..
  • Hard bearing steel with strong bearing capacity, not easy to deform..
  • Ensure that the clutch can be smoothly engaged, soft to disengage, reduce wear, and extend the life of the clutch and the entire driveline..
Check Stock

36774321 Drive Coupler for Ingersoll Rand Doosan Portable Air Compressor Replacement Part Flexible Coupling Slotted Disc

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Reign of Fire

  • ... This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes a hull, decks, Injection parts, CNC-sheets, decals, brass photo etch, instructions and other parts for WTC installation. WTC（water tight cylinder）is a sealed cabin that accommodates all machinery and electronic equipment, such as motors, water-Piston, solenoid valve, servo, ESC, ERS, RC, battery etc. WTC supplies submarine the ability of running, diving, and floating..
  • Already Including Double Piston Tank WTC KIT Already including servos,esc,bcu.
Check Stock

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Belimo | Z3075Q-J+CQB24-3 | ZoneTight | 0.75\ | 3 Way | 5.9 Cv | w/ Non-Spg | 24V | On/Off/Floating

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock