Reviews Cold Stamped Clamp

(GG) 60\ Ratcheting Off Road Utility Farm Jack Equipment Lift

• The Hi-Lift Jack HL604 60 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components.
• Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.
• Two piece handle and socket is durable and reliable. Made of Cast & Stamped Steel Parts.Clamping Capacity:750 lbs.
• Safe use information stickers, including rated load details and operating instructions, affixed to handle.
• For greater safety, all Hi-Lift jacks are equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.

Hi-Lift Jack HL604 60\ Hi-Lift Black Cast and Steel Jack

• The Hi-Lift Jack HL604 60 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components.
• Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.
• Two piece handle and socket is durable and reliable. Made of Cast & Stamped Steel Parts.Clamping Capacity:750 lbs.
• Safe use information stickers, including rated load details and operating instructions, affixed to handle.
• For greater safety, all Hi-Lift jacks are equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.

LP Chad Smith Signature Ridge Rider Red Hot Bell Cowbell LP008CS

• Patented Red Jenigor Ridge dampens sound and resists denting Patented Vice-Clamp with memory lock Fits rods from 9.5 to 12.5 mm Chad Smith's signature stamped into bell Made in the U.S.A..
• To be the ultimate rock drummer, you need the ultimate rock bell.
• The Ridge Rider Red Hot Bell is Chad Smith's choice for its legendary tone, road-worthy durability and time-tested performance.
• A patented Vise-Clamp Mount holds the Red Hot Bell securely in place and accepts every possible rod diameter.

Mitutoyo 186-101, Radius Gage Set, 15 Pairs of Leaves, 1/32 to 1/4 by 64ths

Razor Beast Kick Scooter - Blue

• Pro-style stamped steel rear fender brake model.
• Fixed riser style handlebar with soft rubber grips.
• CNC style steel fork and triple stacked headtube clamp.
• Deck length 19" (485mm), 4" (100mm) wide with full deck grip tape.
• Metalized 14 spoke 98mm urethane wheels with RZR Pro 20 bearings.

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

• 【Flexible hose pliers with long line design】This flexible hose clamp pliers is a 24 inch pliers, designed with 24in flexible wire rope, allowing you to operate flat hose clamps in areas that are usually hard to touch, the flexible hose can be bent to any position, it is An easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
• 【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
• is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
• 【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
• let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
• 【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.

Nitze Stinger Handle Universal Camera Top Handle with Built-in QR NATO Clamp - PA28-A

• 【Multiple Mounting Points】Nitze nato camera handle PA28-A is filled with 1/4”-20 threaded holes, 1/4” locating holes, 3/8” ARRI locating holes all around the handle for more accessories expansion..
• 【Built-in NATO Rail】Camera top handle grip built-in NATO rail on the top of the handle provides convenience for attaching accessories with NATO clamp..
• 【Built-in QR NATO Clamp】Nato clamp top handle built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever..
• 【Cold shoe Adapter】Nato rail top handle equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility..
• 【Ergonomic Design】Nitze stinger handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting..

Mitutoyo - 504-186-105 186-105, Radius Gage Set, 17 Pairs of Leaves, 1mm to 3mm by 0.25mm, 3.5mm to 7mm by 0.5mm

Woods Clamp Lamp with 10 Inch Reflector and Bulb Guard (300 Watt Bulb, 6 Foot Cord)

• VERSATILE LAMP CLAMP: Lets you direct light where you want. Ideal for use in office or home.
• Ideal for a temporary heat source for pig and chicken brooders.
• CLAMP LIGHT FEATURES: An attached 6 foot cord 18 AWG SPT-2.
• spring clamp grips that will not damage surfaces.
• PORTABLE, ON-DEMAND LIGHT SOURCE: The adjustable clamp lamp sports a nifty size. Easy to carry around and set up alternative light.
• SATISFACTION GUARANTEED: A leader in a wide variety of electrical and electronic products, surge protectors, garden lights, timer products and other accessories, deliver strong performance every day.
• GROW LIGHT CLAMPING LAMP: Can be used as a grow light during the cold months for indoor plants. Makes a great light source for indoor gardens.
• INDOORS CLAMP-ON LAMP: Has a metal guard to protect the bulb. Can be used as a desk lamp clamp, table lamp clamp, bedside lamp clamp, or a studio work light.

Gaming Light for Desk, Streaming Light with Desk Clamp Stand for Twitch

• Gaming Light for Desk: 6 inches Ring light with 3 light modes (Cold Light,Mixed Light,Warm Light) and 10 adjustable brightness.
• Streaming Light for Twitich: USB power supply, comes with 1/4''-20 female Thread, can work on Tripod, Monopod, Light Stand.
• Desk Clamp Stand: height can be adjusted from 13.5inches/34.5centimeters to 23.2inches/59centimeters through fixed knob.
• Desk Clamp: The clamp is adjustable for fitting different table through adjust the knob and screw. The clamp can support the table thickness from from 0.4 inches to 4.7 inches. with EVA silicone Non-Slip Mat.

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

• Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
• Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
• Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
• Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
• Length of large toggle clamp foot including rubber 1.88".
• Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..

POWERTEC 20308 J Hook Toggle Clamp 451 w Hook Type Draw Latch Pull Action – 375 lb Holding Capacity, 1PK

• INCLUDES: (1) J-Hook Type Toggle Clamp 451 type.
• FUNCTION: An essential clamping tool that utilizes a hook type draw latch for straight-pulling action – perfect for table saw stand attachments, racks, gates, smoker lids, creative automotive functions and woodworking projects.
• BUILD: Made with heavy duty, highly durable and shock resistant cold-rolled carbon steel, enhanced with a protective corrosion resistant zinc plated coating, and paired with a red ergonomically designed anti-slip vinyl hand grip for optimal comfort and control.
• DESIGN: Features an impressive holding clamping capacity of 375lbs with reliable latch and clamp action, plus a hold-down side mounting with U-shaped clamping profile.
• SPECS: Clamp Base 1-1/2” x 1-7/8” | Mounting holes: 7/32” spaced 15/16” x 1-3/8” apart | 5/16” J Hook: 5-1/2” (length) with 5/16-18 thread.
• Ideal for use on doors, machinery, automobiles, jig assemblies and other medium to heavy-duty job applications.
• Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
• Features hook shaped clamp rod for clamping any custom latch point.

POWERTEC 71368 Woodworking Parallel Clamps 24-Inch | Jaw Bar Clamp Spreader Tool | 2PK

• Includes: (two) piece 24-inch parallel jaw Clamp set.
• Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 880lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier.
• Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool.
• 90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement.
• Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool.