Reviews Coipacks For 3 Vortec

A-Team Performance - Complete Distributor - Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap

  • EFI Vortec 1996-2002 Complete Distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit.
  • Compatible With Chevy / GM 5.0 L / 305 in3 commonly referred to as Vortec 50005 and .7 L / 350 in3 commonly referred to as Vortec 5700.
  • CNC-Machined — High-quality EFI distributor with CNC-machined aluminum housing, steel internal, and chromoly steel gear material construction.
  • Specification - Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders.
  • Direct replacements for stock units, but with improvements throughout.
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

Aluminum High Rise Small Block Chevy SBC Vortec Hurrican Single Plane Intake Manifold 350 Single Plane Modified 3000-7500 RPM

  • This Satin Vortec Hurricane Single Plane Intake Manifold is the best performing single plane race style manifold available for engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • It has been proven over and over in dyno tests and on track use to provide unequaled power and performance..
  • It features four corner water ports, a tapped fifth port in the front face, nitrous bosses, and dual distributor holddowns..
  • 360° single plane high rise design for outstanding power from 3000~7500 RPM.
Check Stock

M48 Magnum Spear With Vortec Sheath

  • Aluminum shaft with glass-fiber-filled nylon handle.
Check Stock

Speedway Motors Chrome 1987-Up Small Block Fits Chevy Centerbolt Valve Covers, 1-Hole

  • For 1987-up heads and Vortec style SBC heads.
  • 1-hole per cover with separate oil fill and PCV holes.
  • Holes are 1 1/4" with baffles. Grommets are NOT included.
Check Stock

Rod and Main Bearings with Piston Rings compatible with 1967-95 CHEVY SBC 350 5.7 L

  • Does not fit Vortec ENGINE Pistons with metric ring lands.
Check Stock

A-Team Performance – Marine Distributor Crab Style – Compatible with Mercruiser Volvo Penta 18-5351 Vortec V-8 884794A02 5.0L/ 5.7L/ 6.2L MPI

  • Compatible with Mercruiser Volvo Penta 18-5351 Vortec V-8 884794A02 5.0L/ 5.7L/ 6.2L MPI.
  • Reliable high signal strength trigger system.
  • Ball bearing and bushing combination provide maximum timing stability and long life. Aluminum housing construction.
  • Compatible with flat tappet or hydraulic roller cams Fits Vortec V-8 2001 and up 5.0L/ 5.7L/ 6.2L MPI EnginesReplaces Mercruiser 884794A02, Mallory 9-26751.
Check Stock

Remflex 2049 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Reflex's unique flexible graphite material has been proven for more than 30 years.
  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6 /6.0L- LS1, LS2 Vortec, 1-3/4" Round Port, For Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

GM 2001-2011 4.8 & 5.3 re-ring rebuild set

  • Includes Full gaskets, Gallery Valve, New Rings (Top Chrome) New Bearings (OE Style).
  • Fits 2001-2011 GM 4.8 & 5.3 Truck Vortec Engines.
  • Fits these VINS from 2001: P,T,Z,B,M,3,0,J,4,C,V..........If you have other needs feel free to send us a message with your vehicle VIN..
  • All orders will be sent STD parts unless buyer specifies other sizes when ordering..
Check Stock

Rebuilt OEM Connecting Rod compatible with 1999-2010 LS Vortec 5.3L & 6.0L and 1997-05 5.7L LS1 LS6 Casting #143

  • LS & Vortec rods with press fit pins. Not for Floating Pins..
Check Stock

MOSTPLUS Ignition Distributor Compatible with Chevrolet GMC Vortec V8 5.0L 5.7L 7.4L 93441558

  • [ Interchagne Part Number ] — 12570425, 93441558 , 01104079, 01104051, 01104058, CZ20008,841829,84-1829,DST1829..
  • [ Application ] — Compatible with Chevrolet GMC Vortec V8 5.0L 5.7L 7.4L.
  • [ Including ] — Complete unit including ignition module, cap, and rotor.Installation instruction is included..
  • [ Warm Tips ] — Please check with the fitment chart or Part number for the right compatibility before purchase.
Check Stock

Ignition Distributor Set Brass Terminals Distributor Cap and Rotor Kit compatible with Chevrolet GMC Cadillac Vortec V8 5.0l 5.7l 7.4l Compatible Part Number DR474 DR331

  • Distributors cap and rotor kit features brass inserts and stainless steel rotor springs,designed to provide the best possible fit to ensure maximum conductivity between the distributor towers and spark plug wires,prevents arc through and crossfire..
  • Engineered specifically compatible with General Motors Vortec V8 engines,specifically compatible with General Motors Vortec V8 engines,Offering the quality,reliability,durability..
  • Direct replacement ready to install,including the cap and rotor kits.Fuel mileage and acceleration better than OE part..
  • Recommended replacement part compatible with GM vehicle's original factory component,Fits standard and automatic transmissions..
  • Cap and rotor kits reference part number: 1104079,93441558,1104051,1104058..
Check Stock

Ls Wiring Harness-HPI 97-06 LS1 Standalone Wire Harness 4.8 5.3 6.0 VORTEC Standalone Wiring Harness with 4L60E Compatible with DBC LS1 4.8 5.3 6.0 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006

  • ❤️Applicable: This independent wiring harness is suitable for vortec 4.8, 5.3, 6.0 engines 1997-2006, with mechanical throttle body and 4l60e....
  • ❤️ Stable operation: This independent wiring harness has undergone 100% quality inspection before leaving the factory to ensure high reliability.....
  • ❤️Anti-leakage: This independent wiring harness allows the PCM to be installed under the vehicle dashboard and has a slip ring seal, which has a....
  • ❤️Plug and play: This independent harness is fully plug and play, with switching power supply, constant power supply and ground connection..
  • ❤️Main effect: This independent wiring harness designed for Vortec 1997-2006 can be retrofitted to older muscle cars and street light poles or....
Check Stock