Reviews Coil To Bar Line

TUPARTS Pack of 1 Ignition Coil Fits for Nissan 350Z Infiniti G35/M35/FX35 2003-2008 Replacement for OE: UF401 C1439 5C1430

  • IGNITION COIL COMPATIBILITY: Nissan 350Z Infiniti G35/M35/FX35 2003-2008 (for more accurate compatibility, just refer to the FITMENT BAR above the listing for more details). Make sure it fits your vehicle before purchasing..
  • COILS COMPONENTS AND FUNCTION: The ignition coil is mainly composed of primary coil, secondary wire and core. In the ignition system, the ignition coil is used to change the low-voltage electricity into high-voltage electricity, so that the spark plug produces spark..
  • COIL PACKS REPLACeMENT TIME: Generally speaking, the service life of ignition coil is over 100,000 kilometers. If the ignition coil on the vehicle needs to be replaced because of aging, then even if only one failure occurs, it is best to replace it all together, because the others are similar..
  • MAINTENANCE OF IGNITION COILS: Prevent ignition coil from heating or damp. Do not turn on the ignition switch when the engine is not running. Check, clean and tighten line joints regularly to avoid short circuit or tie-up. Control Engine Performance to Prevent over-voltage. The moisture on the ignition coil can only be wiped with cloth, otherwise the ignition coil will be damaged..
  • ABOUT WARRANTY: 12-months after-sale warranty and online answers during working time. If y....
Check Stock

Detroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set

  • Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
  • This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
  • This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
  • Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
  • 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
Check Stock

None branded Paintball Coil Remote Hose Line w/Quick Disconnect & 3000psi Pressure Gauge

  • Paintball PCP Coil Remote Hose Line w/Quick Disconnect.
  • Heavy Duty Remote Hose/Line With Quick Disconnect that get bulky tank off your paintball gun with a coil remote!.
  • Unlike braided stainless steel hoses, the coil will expand and contract to fit the position you're in.
  • Rated for 3000 psi use, so you can be sure you won't have any blown ends, It will work with ANY screw-in CO2 or compressed air / N2 tank!.
  • Now with more flexible coil-Reduced number of coils reduces catching on vests and packs-Field tested with great results..
Check Stock

Detroit Axle - Front and Rear Strut w/Coil Spring Assembly Sway Bar Links Replacement for 2007-2011 Toyota Camry - 8pc Set

  • Kit Includes: (2) Front Strut & Coil Spring Assembly, (2) Rear Strut & Coil Spring Assembly, (2) Front Sway Bar Links and (2) Rear Sway Bar Links.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

Paintball Remote Coil Hose with Quick Disconnect and 3000psi Pressure Gauge, HPA High Pressure Co2 Adapter Hose

  • Paintball PCP Coil Remote Hose Line with Quick Disconnect.
  • Heavy Duty Remote Hose/Line With Quick Disconnect that get bulky tank off your paintball gun with a coil remote!.
  • Unlike braided stainless steel hoses, the coil will expand and contract to fit the position you're in.
  • Rated for 3000 psi use, so you can be sure you won't have any blown ends, It will work with ANY screw-in CO2 or compressed air / N2 tank!.
  • Now with more flexible coil-Reduced number of coils reduces catching on vests and packs-Field tested with great results..
Check Stock

Rancho RS66124BR5 Suspension Kit

  • COMPATIBILITY -- Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel.
  • non-Rubicon models will net taller lift height versus Rubicon).
  • BUILT FOR THE TRAIL -- Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height).
  • COMPLETE SOLUTION -- Includes four Rancho RS5000X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware.
  • ENHANCED CONTROL -- Rancho RS5000X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and rod overextension inside the shock.
  • order RS66124BR5-1 and RS66124BR5-2 for a complete kit.
Check Stock

Tbest Paintball Hose, Paintball Marker Remote Coil Cylinder Connection Valve Hose Corrugated Hose

  • 【DURABLE】Paintball hits the best, most durable coil remote control..
  • 【USAGE】Move your tank into the pouch and brighten the mark..
  • 【FOR CO2 TANKS】Paintball Remote Line is designed for co2 tanks, 3000 psi and 4500 psi HPA systems..
  • 【FUNCTION】High flow coil hose, can achieve unlimited movement..
  • 【INTERNAL LOCK】Internal locking prevents loss of adjusting knob..
Check Stock

NIMTEK MS290 Carburetor for STIHL 029 039 MS310 MS390 Chainsaw with Ignition Coil Air Filter Fuel Line Repower Kit

  • MS290 Carburetor with Air Filter Fuel Line Repower Kit for STIHL MS310 MS390 029 039 Chainsaw.
  • Fitment models: STIHL MS290 MS390 MS310 029 039 chainsaw.
  • Ignition module Coil replace for 0000 400 1300.
  • Package include: 1 carburetor, 1 igniton coil, 1 air filter, 1 fuel filter, 1 spark plug, 1 fuel line, 1 oil filter, 1 impulse line, 1 oil line.
Check Stock

Heating Power Supply Module 5v - 12v ZVS Low Voltage Switching Induction Heating Power Supply Module with Heater Coil

  • HIGH QUALITY: This is Zvs heating power Supply module including heating coil,it’s durable for a long lasting to life..
  • INPUT VOLTAGE: DC5V-12V(We are not guarantee the module will work when the voltage is over 12V or less than 5V).
  • INDUCTION HEATING: power work five minutes to cool. For induction heating current is larger, heating coil is relatively large. When heated, part of the heat generated by the heated object will be passed on to the heating coil, over time, the temperature of the heating coil will be high. If the heating coil in the words of the terminal, the terminal part of plastic melt,Therefore, induction heating the best heating coil directly welded to the PCB..
  • HEATING COIL: The width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don’t more than two-thirds..
  • NOTE: Ensure all the components welding right, power line connect in right way, than to set up an electric circuit, The Width of the heated object is as far as possible between the 1/3 ~ 1/2 of the inner diameter of the heating coil, the maximum not more than 2/3..
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock

Precision Port 2' Flared Speaker Cabinet Port Tube Kit

  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
  • 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
  • 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
  • One 8'' High Power 4 Ohm Subwoofer - 1.5'' Aluminum Voice Coil.
  • Built-In High Output Amplifier - Bass Reflex Vent for Added Sub-Bass Response.
  • Blue LED Light Behind The Grill - 250 Watts Max Power Handling.
  • Blue Polypropylene Cone - RCA/Speaker Line Input.
Check Stock

Prokomon 2 Pcs Coil Spring Compressor Tool - Coil Spring Clamps Strut Spring Compressor Tool Set with Safety Guard

  • ◇ Remove and install coil springs, shock absorbers, struts, and spacers safely and efficiently with the 2 PCS Auto Coil Spring Compressor Tool Set.
  • ◇ Many coil spring compressor tools slip and buckle under high tension, heavy duty spring compressor tool bears 1000 kg maximum capacity per pair.
  • ◇ Safety guard bar adjusts from 8 to 11.7 inches (20.3-29.7cm) and prevents accidental pressure release while you work with strong, powerful springs.
  • Suspension spring tool hook jaws are slanted and have locking mechanisms for increased security.
  • ◇ Automotive coil spring compression tool brackets feature hook jaws that can extend from 1.4 to 11 inches (3.6 to 27.9cm) to fit your cars, trucks, motorcycles, ATVs, and other larger vehicles.
  • Car spring compressor tool bears up to 2,204.5 pounds (1000kg).
  • ◇ Avoid strut compressors with flimsy hooks creating slippage and other safety problems. coil compressor hooks grip springs tightly by turning easy to use hex nuts.
Check Stock

JEEP GRAND CHEROKEE SRT8 6.1L HEMI SPARK PLUGS MOPAR

  • A SMOOTHER RIDE: Is your car experiencing any of the following: Difficulty starting, long crank time, misfires, high fuel consumption, engine vibration, check engine light, and other problems? Install a reliable ignition coil and get your car running like new again..
  • QUALITY THAT LASTS: With excellent heat resistance, corrosion protection, and better durability, you won’t need to worry about replacing parts anytime soon. Better quality. Better performance. And even better news for you? Less fuel costs..
  • EFFORTLESS INSTALLATION: Skip the garage and save yourself time and money. A seamless installation will spark new life into your car.
  • you can experience more consistent, smooth engine starts right away..
  • COMPATIBLE VEHICLES: Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase. Select your car’s year, make, and model now. This Ignition coil Pack is Compatible with:.
  • COMPATIBLE VEHICLES: Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase. Select your car’s year, make, and model now. This Ignition coil Pack is Compatible with:56028394AB, UF378, IC508, C1414, 5602....
Check Stock