Reviews Coil Stock Metal Brakes

Ridgid R63015 Spiral Cutter, 1-1/4-Inch, Silver

  • ✔ 2-WAY CUTTING - First ever siding brake cutter / Cut-off tool to 003cb003ecut003c/b003e effortlessly 003cb003ein both directions (right to left + left to right).003c/b003e -- Fits all Van Mark brakes and all Tapco PRO Series Brakes (1995 and after).
  • ✔ 1" OFFSET CUTS - Three cutting wheels make 003cb003eaccurate, clean and effortless003c/b003e cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24 gauge Stainless Steel..
  • ✔ STAYS ON THE BRAKE - With roller wheels, the 2-Way Cut-Off Tool is 003cb003eanchored to the brake's anvil.003c/b003e This allows it to travel the length of the brake to make a cut, and then later travel back the other way to make the next cut, while still attached to the brake..
  • ✔ TUCKS OUT OF THE WAY - This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process..
  • ✔ LIGHTWEIGHT + QUALITY & DURABILITY - 003cb003eLightest003c/b003e portable siding bender 003cb003ecut-off tool003c/b003e in the industry (Half the weight) for easy handling - 003cb003eLong lasting003c/b003e heat treated and zinc plated cutting wheels - CNC machined and anodized body and tracking pulleys - 003cb003eHigh quality003c/b003e sealed roller bearings & stainless steel f....
Check Stock

BlueSunshine BB8 Front and Back Disk Brake Kit - 160mm for 80cc Gas Motorized Bicycle (BB8 Disk Brake Kit - G3-3)

  • CNC bike V brake Set Forged alloy construction.
  • Coil springs design aims for rim brakes tension adjustment,extended 4-finger brake levers are compatible with V-brakes and cantilever brakes..
  • CNC MTB brake levers are only suitable for bike handles in 22mm-22.2mm diameter,Arm Length: 110mm..
  • 1 pair of high quality 70mm(Length) V brake pads come with the direct-pull cantilever Brakes set..
  • They are universal V-brakes compatible with both front/rear wheels of MTB/BMX/mountain/road/folding/hybrid bike, especially for most small wheel bicycles such as 24 inches or smaller ones..
Check Stock

CNC V Brake Set, Bicycle Linear Pull V Brakes for Front/Rear Wheel,V Brake with Lever and Cable, Long Arm 110mm, Red Black

  • CNC bike V brake Set Forged alloy construction.
  • Coil springs design aims for rim brakes tension adjustment,extended 4-finger brake levers are compatible with V-brakes and cantilever brakes..
  • CNC MTB brake levers are only suitable for bike handles in 22mm-22.2mm diameter,Arm Length: 110mm..
  • 1 pair of high quality 70mm(Length) V brake pads come with the direct-pull cantilever Brakes set..
  • They are universal V-brakes compatible with both front/rear wheels of MTB/BMX/mountain/road/folding/hybrid bike, especially for most small wheel bicycles such as 24 inches or smaller ones..
Check Stock

CNC Bicycle V Brake Set for Front/Rear Wheel, Linear Pull V Brakes with 55mm(L) Pads,Black

  • CNC bike V brake arms are made of T6 forged aluminum..
  • Coil springs design aims for rim brakes’ tension adjustment..
  • Two pairs of high quality 55mm(Length) V brake pads come with the direct-pull cantilever Brakes set..
  • They are universal V-brakes compatible with both front and rear wheels of MTB/BMX/mountain/road/folding/hybrid bike, especially for most small wheel bicycles such as 24 inches or smaller ones..
Check Stock

TAPCO 10379 Pro Cut-Off with Case

  • Cut-off tool that creates factory-quality cuts in coil stock, sheet metal, and vinyl.
  • reduces scrap and eliminates knifing damage to costly bending hinges.
  • hardened and captured tool steel cutting knives.
  • Includes a molded carrying case to protect the tool when it's not in use.
Check Stock

Line Lock Roll Control Brake Lock,Universal Launch&line lock kit for brakes Electric Solenoid Kit(Black)

  • Brake line lock can be widely used in various models which allows the front brakes to lock independently of the rear brakes via a switch. It also allows the front brakes to be locked and the rear brakes to be open, so that the driver to spin the rear wheels without wasting the rear brakes..
  • Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.
  • Each kit includes a inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter and 3pcs mounting screws. High quality stainless steel valve assembly gives it strong sturdiness.Works with 12 -24 volt electric systems.
  • Fully-enclosed epoxy-molded electrical coil makes it reliable.
  • The attractive aluminum fin shell enables it to cool down.
  • The wider lightweight base provides better mounting stability.
  • besides, it has extra threaded port for brake line pressure gauge..
  • ATTENTION: This line lock is to be installed in the front braking system (for rear wheel drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for....
Check Stock

MSD 8225 HEI Ignition Coil

  • The coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83647.
  • The coil features special low-inductance, high-temperature windings which charge faster to give you increased spark energy at high RPM.
  • OBD II and CARB approved and legal for use in all states.
  • Coil mounts directly in place of factory style with improved performance.
Check Stock

ALDAN AMERICAN FRONT & REAR COILOVER KIT,ADJUSTABLE,FOR 68-72 A-BODY,GTO,CUTLASS,SBC

  • Brand New Aldan American Adjustable Coilover Kit for the Front and the Rear of the vehicles listed below (Front Part #AB2FMS and Rear Part #ABRMS)..
  • Fits: 1968-1972 A-Body with a Small Block Chevy engine.
  • Features: Single adjustable coilovers | Adjustable ride height: Front: from 0.0" to 2.0" lowered & Rear: from 0.5" to 3.0" lowered | Spring Rate: Front: 450 lbs/in & Rear: 140 lbs/in | Provides full adjustment of shocks, springs, and shock damping | Gas charged | 6 front and 11 rear adjustable valving selections.
  • Convert your front and rear suspension to coil-overs. Aldan Phantom Series, single adjustable coil-overs deliver superior handling & ride quality for a drastic improvement over stock suspension..
  • Aldan High tensile, high travel coil-springs provide greater consistency over stock springs. Aldan coil-over kits are ride-height adjustable allowing you to properly lower your ride-height. Great for street & autocross applications..
Check Stock

NEL Thunder 14.5 x 10.5 DD Search Coil for Fisher F70, F75

  • The Sharpshooter Coil is 9.5" long x 5.5" wide and designed to search areas heavily littered with iron and other trash debris. The shape of the coil helps to separate nonferrous metal from iron..
  • The coil is light and weighs in at 12.3 Ounces, 350 Grams with coil cover. This DoubleD coil has good sensitivity to large, medium and especially small targets. Very easy to use and is excellent at pinpointing targets..
  • The coil is waterproof and fully submersible, the body is filled with epoxy resin. Additionally a black protective coating, the same as used on marine boats, makes it possible to use the coil without coil cover..
  • The coil copes excellently with high and medium soil salinity. One of the best coils for metal detecting for jewelry on beaches. Recommended for professionals and amateurs!.
  • Includes coil cover, hardware and Velcro cable strap. 2 Year Warranty. For use with the Fisher F70, F75 Metal Detector.
Check Stock

Gold Bond 10" EuroCoil #108 Queen Leather Futon Mattress/Cotton/Leather

  • TechnicalSpecs 10"Euro Coil with 560 pocketed or encased coil 14.5 gauge steel , 100% American made spring system with .66" of foam on either side and 20 lbs of Gold Bond Joy cotton on either side, coil count and cotton weight are based off the full size.
  • Mattress Fabric Content / Mattress Covering Leather.
  • Sturdy sleeping surface with lightweight EuroCoil folds easily into any futon frame.
  • Product Summary 10" EuroCoil #108 queen Leather futon mattress, encased coil/pocketed coil spring,great for sleeping, also great for platform bed, firm sitting or sleeping surface.
  • Encased Coil/ pocketed coil spring futon mattresses.
Check Stock

NEW SOUTHWEST SPEED 1955-1957 CHEVY 2" DROP SPINDLES FOR WILWOOD HEIDT'S DISC BRAKES FOR TRI-5 HOT ROD, STREET ROD AND RESTORATION APPLICATIONS, 1955 1956 1957 CHEVY

  • Pair Of Brand New Southwest Speed 1955 - 1957 Chevy 2" Drop Spindles For Use With Wilwood Disc Brakes (SWS Part # 103-9760).
  • Features: | * These Spindles Are For Use With The Wilwood Disc Brake Kits Listed Below (Which We Have In Stock As Well): | * Wilwood Part # 140-12305 Series 11" Kits | * Wilwood Part # 140-12306 Series 12" Kits | * Wilwood Part # 140-12306-DP6 Series 12" Kits With 6 Piston Calipers | * Wilwood Part # 140-12307 Series 13" Kits.
  • These Spindles Fit 55 - 57 Chevy Ball Joints And Steering Arms Strong Forged 4140 Steel Construction.
  • Applications: | * 1955 Chevy With Wilwood Disc Brakes Listed Above | * 1956 Chevy With Wilwood Disc Brakes Listed Above | * 1957 Chevy With Wilwood Disc Brakes Listed Above.
  • We Also Have Tubular Upper And Lower Control Arms For 55 - 57 Chevy's.
Check Stock

Gold Bond 10" EuroCoil #108 Full Black Duct Futon Mattress/Cotton/Black Duct

  • Mattress Fabric Content / Mattress Covering 100% polyester.
  • Product Summary 10" EuroCoil #108 Full black duct futon mattress, encased coil/pocketed coil spring, great for sleeping, also great for platform bed, firm sitting or sleeping surface.
  • Sturdy sleeping surface with lightweight EuroCoil folds easily into any futon frame.
  • Encased Coil/ pocketed coil spring futon mattresses.
  • TechnicalSpecs 10"Euro Coil with 560 pocketed or encased coil 14.5 gauge steel , 100% American made spring system with .66" of foam on either side and 20 lbs of Gold Bond Joy cotton on either side, coil count and cotton weight are based off the full size.
Check Stock

Dryer Heating Element Restring Coil Compatible with Frigidaire GE Electrolux, 5300622032 AP2135127 PS451031

  • This is a Replacement Dryer Heating Element Restring Coil..
  • Heater Coil used on some Gibson, Kelvinator, Montgomery Wards, Tappan, Universal and Westinghouse brand dryer models..
  • Compatible with Part No.5300622032, AP2135127, 08015672, 3042, 3202787, 3281114, AH451031, EA451031.
  • All "in stock" items will be shipped the same business day when applicable..
  • Include: 1 PC Dryer Heating Element Restring Coil.
Check Stock