Reviews Cobalt Steel End Mills
YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
- Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check StockNiagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter
- 4 Flute design for creating finer finishes and creating a higher metal removal rate.
- General purpose end mill for working on all types of materials.
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
- Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
- Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.
Check StockYG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockYG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockNiagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter
- 4 Flute design for creating finer finishes and creating a higher metal removal rate.
- General purpose end mill for working on all types of materials and high temperature alloys.
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
- Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
- Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check StockYG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockYG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
- Four flutes produce a better finish than fewer flutes.
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Square nose end mills (also called square end) create sharp, unrounded cuts.
Check StockNiagara Cutter 17011737 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 6 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter
- fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
- Square nose end mills (also called square end) create sharp, unrounded cuts.
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check StockYG-1 E2237 Cobalt Steel Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 2.5\ Overall Length, 0.4375\ Cutting Diameter, 0.375\ Shank Diameter
- Corner rounding end mills are designed to take the edge off sharp corners.
- Four flutes produce a better finish than fewer flutes.
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
- Non-center-cutting design supports peripheral milling and finishing.
Check StockOSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box
- APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
- Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
- Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
- Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
- These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check StockErnie Ball Regular Slinky Cobalt Electric Guitar Strings 3-pack 10-46 Gauge P03721
- 3 individual sets of Regular Slinky Cobalt electric guitar strings.
- Cobalt produces a stronger magnetic relationship between pickups and strings, resulting in increased output.
- Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
- Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
- Made in California, USA with the finest and freshest materials.
Check StockCleartone Heavy Series Electric Guitar Strings (13-70)
- Cobalt produces a stronger magnetic relationship between pickups and strings than any other alloy previously available.
- Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
- Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
- Engineered to maximize output and clarity.
- Made in California, USA with the finest and freshest materials.
Check StockErnie Ball 2225 Extra Slinky 8-38 (6 Pack Bundle)
- Cobalt produces a stronger magnetic relationship between pickups and strings than any other alloy previously available.
- Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
- Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
- Engineered to maximize output and clarity.
- Made in California, USA with the finest and freshest materials.
Check Stock