Reviews Cobalt M35 Countersink Bits

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (30 Pieces,1/8 Inch)

  • Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is reliable and practical, with a long service use, heat and abrasion resistance.
  • The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
  • Creative twist design: metal cobalt drills for hardened steel has 135 degrees split point tip and torsional design to improve cutting speed with self-centering ability.
  • They can avoid walking during work process, while clearing chips and particles more quickly and easily.
  • Nice features: the nice twist drill bits have precise diameter.
  • M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
  • The size is small, please pay attention to use.
  • Various fitness: M35 high speed steel cobalt drill set is nicely suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
  • What you will get: the package contains many cobalt drill bits, sufficient quantity to meet your various needs.
  • Please pay attention to speed, pressure and heat control during drilling.
Check Stock

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (15 Pieces,1/16 Inch)

  • Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is durable, strong and practical, with a long service life, heat and abrasion resistance.
  • The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
  • Creative twist design: metal cobalt drills for hardened steel has 135° split point tip and torsional design to improve cutting speed with self-centering ability.
  • They can avoid walking during work process, while clearing chips and particles more quickly and easily.
  • Nice features: the 1/16 inch twist drill bits have precise diameter.
  • M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
  • The size is small, please pay attention to use.
  • Various fitness: M35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
  • What you will get: the package contains 15 pieces 1/16 inch cobalt drill bits, sufficient quantity to meet your various needs.
  • Please pay attention to speed, pressure and heat control during drill....
Check Stock

M35 5% Cobalt Metric Drill Bits Set (1mm-10mm/19pcs), Straight Shank Jobber Drill Bits, Metal HSS Twist Drill Bits for Stainless Steel Hard Metal and Cast Iron

  • ✅【5% COBALT TWIST DRILL BITS SET】Made from M35 Cobalt Steel with Molybdenum and Cobalt added to form a hardened alloy, can measure up to 67 Rockwell hardness, cut faster, last longer, and last longer than normal HSS drill bits 12 times..
  • ✅【19PCS METRIC DIRLL BITS SET】The set includes 19pcs of M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. Organized in a sturdy plastic storage case for easy transport to your workplace..
  • ✅【TWIST DESIGN AND PERFORMANCE】Precise 135° SPLIT Point, Gold Oxide Surface and Round Straight Shank. Prevents walking and removes chips and particles faster. Precision fully ground to ensure smooth chip movement..
  • ✅【PROFESSIONAL AND WIDELY USED】M35 Cobalt High Speed Steel is more suitable for hardening materials. Ideal for cutting stainless steel, steel and cast iron as well as wood, aluminum alloys and other metals. Not suitable for glass or ceramic materials. Pay attention to speed, pressure and heat control when drilling..
  • ✅【SERVICE】If you have any problem with our metric drill bit set or are not satisfied with the product, please feel free to contact WildBossy..
Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
  • 【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
  • 【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
  • 【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.
Check Stock

Hymnorq Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) for Stainless Steel Cast Iron and Hard Metals

  • M35 COBALT STEEL – Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
  • Point Angle – The 3mm bits are 135° split pointed, which is self-centering and will penetrate quickly with less pressure. Will not “walk” or “wander”. The other small ones are 118°..
  • FOR STAINLESS STEEL – Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • 50PC SET – The set includes 50pcs of metric M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm. 10 each metric drills in popular hobbyist sizes at low price. Manufactured to German DIN338 standard..
  • Packed in a plastic bag. These bits are quite small. Please refer to the picture including a size chart..
Check Stock

LudoPam 3/32 Inch Cobalt Drill Bit Set, M35 HSS Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron, Pack of 10

  • HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits.Durable, Higher Heat & Abrasion Resistance..
  • PRECISE 135°SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster..
  • PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials..
  • Pay attention to speed, pressure and heat control during drilling..
  • INCLUDE: 10 pieces of 3/32-Inch cobalt drill bits.
Check Stock

OXMUL M35 Step Drill Bit for Metal 3/16 to 7/8 Cobalt Bits Extra-Heavy Duty for Stainless Steel Hard Steel Mild Metal Aluminum Wood Industrial Grade 12-Steps Co35A2-A

  • [Extra-Heavy Duty+ for Stainless Steel] The M35 Cobalt Drill Bits is Industrial Grade and can drill 8X longer life and 3X faster. This Cobalt Drill bits can help you cut more holes, extra-heavy duty+ for Stainless Steel, Hard steel, Mild Metal, Galvanized Steel, Aluminum,Iron, Wood Plate,PVC and Copper. If you're expanding a lot of holes in metal sheet then please choose this step drill bit.
  • [M35 Cobalt Steel] This M35 Cobalt Drill bit can successfully drill more than 35 holes easily into 1/5" thick Stainless Steel plate like knife through butter!.
  • [12 Steps ︱2-Spiral-Flute] 12 Steps: from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral-Flute:Clears Chips faster.
  • [Cutting Fluid] Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent rust!.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

3/8 Inch Cobalt Drill Bits(5Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • M35 COBALT HIGH SPEED STEEL: 3/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses..
  • 135° SPLIT POINT: 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank allows for firmly holding and accurate centering and makes drilling precise and faster..
  • FULLY GROUND PROCESS: Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance..
  • PROFESSIONAL & WIDELY USE: Perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials..
  • EASY USE & STORAGE: The set includes 5Pcs 3/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair..
Check Stock

VALYRIANTOOL 1/8″ Cobalt Drill Bits(20PCS), M35 HSSCO High Speed Steel Double Ends Stubby Body Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

  • 【20PCS 1/8″ Cobalt Drill Bits】20PCS – 1/8″(Drilling Diameter) x5/8″(Flute Length)x2″(Overall Length) Metal Drill Bits. This drill bit fits the majority of power drill currently on the market..
  • 【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

Hymnorq Jobber Twist Drill Bits 15pc Set, Fractionsh Inch Size 1/16 to 3/8 in Premium Index Case, M35 Cobalt Steel, 135 Degree Split Point, For Stainless Steel Iron and Other Metals

  • COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to create a hardened heat-resistant alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times compared with an average HSS drill bit..
  • SELF CENTERING - The 135°quick-cut split point is self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. (The 4 small bits are 118 degree chisel pointed..
  • 15PC SET - The set includes 15pcs (12different sizes: 2 pieces of 1/16", 3/32",1/8" bits, and 1 piece of 5/64", 7/64", 9/64", 5/32", 3/16", 7/32", 14", 5/16" and 3/8" bit) of fractional inch size M35 grade cobalt steel twist drill bits, packed in a hard ABS plastic indexed case. Manufactured to German DIN338 standard..
  • METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
Check Stock

GMTOOLS 1/4 inch Cobalt Drill Bits, M35 HSS, 135 Degree Tip, Jobber Length Twist Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron, Wood and Plastic, with Storage Case, Pack of 10

  • Packaging: 10 pcs Cobalt Drill Bit Set , Diameter 1/4”(Dia 6.35mm) , Flute Length 2-3/4”(69.85mm) , in a sturdy plastic case for easy storage and carrying..
  • 1/4″ M35 Material Cobalt drill bits: 1/4″ drill bits for metal is made of Industry grade M35 High Speed Steel, containing 5% cobalt, which increases drill bit wear-resistance, durability and heat resistance..
  • 135 Degree Tip Twist Design: precise positioning, lower pressure, fast penetration. Equipped with a straight shank to prevent walking, making drilling more precise and fast,clears particles quickly, decreases friction and heat..
  • Feature：cobalt drill bit’s hardness is uniform so that can be repeatedly sharpened without damaging the cutting edge, suit for hard metals, stainless steel, cast iron, galvanized pipe, high temperature alloy, titanium alloy, woods and hard plastics..
  • Quality Commitment: If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock

MACXCOIP Cobalt Drill Bit Set, 115Pcs M35 High Speed Steel Bits for Hardened Metals, Stainless Steel, Cast Iron and Wooden Plastics, with Metal Index Storage Box

  • [Various Sizes] 115 sets of drill bits include 29pcs Fractional Size:1/16” to 1/2” in 1/64th increments.
  • [M35 Cobalt Drill Bit] The M35 cobalt drill bit is a durable, sharp and robust drill bit suitable for cutting stainless steel, iron castings, copper, aluminum and other soft metals as well as plastics, wood etc..
  • [Quick and Efficient] The cobalt drill bit set can be used effectively on most soft and hard objects, with a 135 degree point tip and twist design for faster cutting, self-centering to prevent walk-off and faster chip and particle removal..
  • [HSS Drill Bit Set] HSS cobalt drill bit set for hardened steel with excellent cutting performance. 115 sets of drill bits for long term use. The inserts are hardened and polished for improved sharpness and precise cutting without wobbling..
  • [Easy Storage] The drill set includes drill holders with size indexes and is packaged in a small, strong package for easy storage and sorting. If you have any questions, please feel free to contact us and we will be happy to help you....
Check Stock

Hymnorq 7/16 Inch Dia. x 5.51 Inch Long M35 Cobalt Steel Twist Jobber Length Drill Bits 2PC Set, 135 Degree Split Point, Extremely Heat Resistant, for Stainless Steel and Cast Iron

  • COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to create a hardened heat-resistant alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times compared with an average HSS drill bit..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 2PC 7/16 INCH FRACTIONAL BITS - The set includes 2pcs of M35 cobalt steel twist drill bits. Total length: 5.51".
  • working length: 4.06". Manufactured to German DIN338 standard. Packed in a plastic bag and a flat paper box..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the ....
Check Stock