Reviews Co2 Welding Touch

WORTHINGTON CYLINDER 332585 14.1 oz Pre-Filled MAP-Pro Gas Torch Style Cylinder

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock

PrimeWeld 75% Argon 25% CO2 Bottle 125CF | DOT 3AA | USA CGA 580 Valve | Best Gas Blend for MIG Welding | Cylinders Full & Ready to Use

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Check Stock

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.030\ (0.8mm) 8\-spool

  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • spool wrapped in moisture-resistant plastic film..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Typical element content (wt%) in product: C=0.08.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.035' (0.9mm) 8'-spool

  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • spool wrapped in moisture-resistant plastic film..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Typical element content (wt%) in product: C=0.08.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

  • ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
  • ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
  • ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
  • ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
  • ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check Stock

WeldingCity 2-pk Mild Steel MIG Welding Wire ER70S-6 11-Lb Spool 0.035\ (0.9mm) 8\-roll | Pack of 2 Rolls

  • Two rolls premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • wrapped in moisture-resistant plastic film..
  • Typical element content (wt%) in product: C=0.08.
  • Two 11-lb rolls at this price. U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Dual Output Argon/CO2 Gas Regulator Flow Meter for TIG MIG Welding 10-60 SFCH 0-4500 PSI CGA 580 Inlet Connection 5/8 x 18 RH Outlet Fitting

  • 【CGA-580 Bottle Inlet Connection】The CGA-580 Bottle Connection fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any....
  • 【Outlet Connection】The welding gas regulator applicable for female 9/16" x 18 nut or male 5/8" x 18 fitting, equipped with 1/4" Hose barbed....
  • 【Precise &Fast】0-4500 PSI. The high pressure gauge allows you to view how much gas is left in the argon cylinder.The CO2 flow meter is adjustable....
  • 【Premium Quality】The argon gas flow meter is made of high-quality brass, and strict tested to guarantee long life. It can greatly prevent gas....
  • 【Perfect for MIG and TIG Welding 】The Argon CO2 welding regulator compatible with kinds of gases, it will be an economic alternative for demanding....
Check Stock

LINCOLN ELECTRIC CO ED030584 .035\NR-211 Fluxco Wire,Black

  • Low spatter, High feedability, Porosity free, Good bead appearance, Easy to weld.
  • Shielding gas is required: 80-percent Ar+20-percent CO2 or 100-percent CO2,All Positions, Single and multi pass welding.
  • Mig solid welding wire for Carbon and Carbon-Manganese steels.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labor conditions.
  • Approvals: ABS, TUV, DB, DNV, LRS, RINA, GL.
Check Stock

INEFIL ER70S-6 .035-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

  • Low spatter, High feedability, Porosity free, Good bead appearance, Easy to weld.
  • Shielding gas is required: 80-percent Ar+20-percent CO2 or 100-percent CO2,All Positions, Single and multi pass welding.
  • Mig solid welding wire for Carbon and Carbon-Manganese steels.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labor conditions.
  • Approvals: ABS, TUV, DB, DNV, LRS, RINA, GL.
Check Stock

INEFIL ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

  • Low spatter, High feedability, Porosity free, Good bead appearance, Easy to weld.
  • Shielding gas is required: 80-percent Ar+20-percent CO2 or 100-percent CO2,All Positions, Single and multi pass welding.
  • Mig solid welding wire for Carbon and Carbon-Manganese steels.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labor conditions.
  • Approvals: ABS, TUV, DB, DNV, LRS, RINA, GL.
Check Stock

Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

  • Argon Regulator for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580.
  • Three Outlet Connection Options: 9/16" Male, 5/8" Female and Hose Barb.
  • Inlet Gauge: 0-400 psi - Dual Scale Outlet Gauge: Argon 0-30 CFH and CO2 0-20 CFH.
  • Includes 5 Feet Argon Hose with 5/8"-18 Male Fittings in Both Ends. Fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
Check Stock