Reviews Co2 Laser Power Source

ICO 10pcs 12 Gram Co2 Cartridges Non-Threaded for Use with CO2 BB Gun, Airsoft Pistol CO2, CO2 Gun and Air Rifle (10)

  • Dependable Solid Build – Power your CO2 powered airsoft with the high-performance 12g Non-threaded CO2 cartridges. The 12g chargers serve as power source for virtually any gas-operated guns. They are C02 cartridges for bb gun, for CO2 pellet gun, for airguns and CO2 airsoft devices, as well as for paintball markers. They are your dependable gas source that will deliver consistent, reliable shots..
  • Reliably Powerful – Each 12g CO2 cartridge can deliver a minimum of 30 shots and a maximum of 200 shots, depending on the C02 powered device you use. However, these CO2 cartridges 12 gram can give you 20 to 30 good shots at once. They are comparable in power and number of shots as other popular brands like crossman CO2 and umarex..
  • Leakproof & Safe – These CO2 12 gram cartridges is made from steel and are filled with high-grade, pure carbon dioxide gas without oils or lubricants. They are leakproof, have snug fit and a solid seal for reliable and consistent performance. Each CO2 cartridge is a one time use only, non-refillable, and 100% recyclable..
  • Universally Compatible – These CO 2 cartridge are compatible with guns that require CO2 12 gram cartridges, i.e. a paintball gun, air gun, or an airsoft CO2 gym. Can also be use for Tire or Ball inflator an....
Check Stock

Green Laser Enhancement Glasses, Elikliv Eye Protection Safety Glasses Goggles for Green Laser Level (Glasses Case Included)

  • 【10600NM CO2 LASER PROTECTION】-the protection wavelength: 10.6um, OD6 +,this laser eye protection visible light transmittance T% 003e 99.5%.
  • 【EXCELLENT DESIGN】-The co2 laser goggles frame is light, durable, impact resistant, and the edge fits tightly to prevent harmful laser damage to glasses.
  • The laser goggles eye protection can cover prescription glasses, if you are a small head user, this kind of glasses is just right for you.
  • 【ERGONOMIC GLASSES】- This glasses for laser protection is in line with ergonomics, reasonable design of nose support, no slipping down, harmless material, flexibility and safety.
  • This laser protection glasses has obtained CE certification and DIN certco certification..
  • 【SPECIAL PURPOSE】-It is widely used in CO2 cutting machine, CO2 laser marking machine, CO2 laser beauty equipment, etc. This laser safety glasses is a standard process glasses specially made for CO2 laser..
  • 【SERVICE GUARANTEE】-If you have any questions about this kind of glasses, please contact us. We provide support service 7 / 24 hours a day..
Check Stock

Asura 12g CO2 Cartridges - 40PK

  • For compatible airsoft/BB/paintball guns.
  • Provides a strong and consistent power source for your airsoft competition game that does not require recharging. You will need a CO2 compatible....
  • NOTE: The 12g unthreaded CO2 cartridges are NOT designed for CO2 Drain Line Cleaner or CO2 Tire Inflator. They normally use 16 gram cartridges....
Check Stock

10.6um OD+7 CO2 Laser Protective Goggles Safety Glasses Protection Glasses Goggles Double-Layer Professional Laser Engraving Marking Cutting Welding Machine Laser Light Safety Glasses Eye Protection

  • 【10600NM CO2 LASER PROTECTION】-the protection wavelength: 10.6um, OD6 +,this laser eye protection visible light transmittance T% > 99.5%.
  • 【EXCELLENT DESIGN】-The co2 laser goggles frame is light, durable, impact resistant, and the edge fits tightly to prevent harmful laser damage to glasses.
  • The laser goggles eye protection can cover prescription glasses, if you are a small head user, this kind of glasses is just right for you.
  • 【ERGONOMIC GLASSES】- This glasses for laser protection is in line with ergonomics, reasonable design of nose support, no slipping down, harmless material, flexibility and safety.
  • This laser protection glasses has obtained CE certification and DIN certco certification..
  • 【SPECIAL PURPOSE】-It is widely used in CO2 cutting machine, CO2 laser marking machine, CO2 laser beauty equipment, etc. This laser safety glasses is a standard process glasses specially made for CO2 laser..
  • 【SERVICE GUARANTEE】-If you have any questions about this kind of glasses, please contact us. We provide support service 7 / 24 hours a day..
Check Stock

Laser Safety Eyewear - Co2/Excimer Filter In Black Plastic Fit-Over Frame Style.

  • Optical Density (OD): 5+, Filtering technology by way of absorption. Visible light transmittance(VLT): >90%.
  • Lightweight black nylon frame, impact resistant, lightweight and durable, fits over most prescription glass frames.
  • Standard EN207: 1998 + A1EN207: 1998 + A1: 2002 approved (European laser eyewear standards for laser safety eyewear).
  • Applications: CO2 Laser Skin Resurfacing and CO2 Fractional Treatments, CO2 laser marking machine, cutting machine, CO2 laser equipment.
Check Stock

Lasers And Dots

  • DESKTOP CO2 LASER: Whether professional engraver or inspired DIYer, this K40 40W home laser engraver from OMTech will allow you to bring your ideas to life with greater speed and precision than ever before, cutting up to 1/8" through plywood or acrylic.
  • the advanced features of its intuitive digital control panel and bundled Windows-compatible editions of LaserDRW and WinsealXP will let you create and recreate even your most intricate designs perfectly.
  • VERSATILE 8x12 BED: The spacious 8x12 inch workbed provides 0.7 square feet of room to fit regular projects and gives you extra 2" height for thicker materials once the vented level board is removed.
  • the stabilizer clamp fixes irregularly shaped items securely in place for accurate engravings.
  • SAFE & EASY OPERATION: A digital laser power supply provides sure and easily monitored operation for your DC tube's expected 2000 hour life.
  • the wide viewing cover includes tinted eye protection.
  • a built-in exhaust fan quickly blows away smoke and dust for better ventilation to protect your laser lenses and reflective mirrors.
  • and a large E-stop is ready in case of emergencies.
  • FAST & FULLY ADJUSTABLE: This CO2 laser system marks wood, paper, plastics, leather, fabric, stone, and a wide range of other nonmetallic m....
Check Stock

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

  • Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
  • This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
  • Aspherical glass lens provides tight Dot Laser in large temperature range..
  • Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Ruida CO2 Laser Controller RDC6445G-Support LightBurn for CO2 Laser Engraving Cutting Machine US Stock

  • [Software] Inside the Ruida RDworks software,it also supports LightBurn. Popular in 6090 1390 CO2 Laser..
  • [Multi-language] English,France,German, Russian,Spanish,Portuguese,Korean,Turkish..
  • [Free returns]30-day free returns, Remote technical support,24 hours messages reply. Ship from Two USA warehouses..
  • [Application] Two independent and adjustable digital laser power control interfaces, which can be used to control glass tube laser power and RF-laser..
  • [Features]4-axis Laser Engraving,10/100MHZ Ethernet or USB 2.0,communication mode is automatically checked..
Check Stock

Carlany CO2 Laser Eye Protection Glasses, 9000nm-11000nm / 10600nm Wavelength Safety Protective Goggles OD 5+, Filtering Technology by Way of Absorption Safety Goggles for Laser Cutting and Engraving

  • Usage: CO2 laser marking machine laser cutting machine, laser welding machine and various CO2 laser engraving.
  • CO2 Laser Protective Goggles Protective wavelength:10600NM, 10.64UM.
  • Laser protection:99.9% above.Visible light transmittance:95%.
  • Style: double-layer,Adjustable glasses legs.Optical density : OD+7.
Check Stock

ZUYIYI Aquarium CO2 Regulator,Big Dual Gauges Display,12V DC Solenoid Bubble Counter with Check Valve,Carbon Dioxide Regulator Suitable for US Standard CGA320 CO2 Cylinder.

  • ✅【Application scenario】Aquarium CO2 Regulator provides a stable input of CO2 to the fish tank, which can make the plants grow faster and the colors will be more vivid, and the fish tank environment will be more beautiful..
  • ✅【SAFETY&HIGH PRECISION 】Our Aquarium CO2 Regulator is equipped with high precision an Aquarium-specific needle valve which is fine-tuning.able to adjust the output flow rate of CO2 to one bubble per 3 seconds..
  • ✅【DUAL PRESSURE GAUGES DESGIN】This aquarium CO2 regulator has 2 pressure gauges which enables you read the regulator Cylinder Pressure and Outlet Pressure clearly.
  • ✅【QUIET&LOW ENERGY CONSUMPTION】Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. deliver gas once connecting a power source..
  • ✅【NO RETURN BUBBLE COUNTER】The bubble counter has a check valve function to prevent water from pouring back into the bottle. This aquarium CO2 regulator is perfect for maintaining CO2 levels in an aquarium or draft beer storage machine..
Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock

405nm 445nm 450nm Laser Diode LD Driver Board 12V 2W Step-Down Constant Current Drive Circuit of TTL Modulation Power Supply

  • Direct Green Laser Diode for large temperature operation range. This module has integrated optic, laser diode, and APC driver circuit..
  • APC Driver Circuit enables the Laser output power safe and constant. Aspherical Glass lens provides tight Dot Laser in large temperature range..
  • Dimensions : Ø0.275" x 1.03" (Ø7 x 26.1 mm).
  • Wavelength : 505~530 nm. Laser output power : Class II - less than 1mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Valken CO2 Cartridge 12 gram-25ct,Silver

  • Disposable CO2 power source for paintball or airsoft.
Check Stock