Reviews Co solvent Polyamide Resin

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistan....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The c....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistan....
Check Stock

Tres Ramitas

  • ▶【Fast Cures 】1:1 ratio epoxy resin by volume, 40 minutes work time. With eliminating craters, crawling and fish eyes, fast Cures to get a....
  • ▶【Crystal Clear】High gloss epoxy resin kit, yellowing resistance from UV exposure and long lasting. The cured resin crafts are as hard as rock....
  • ▶【Safe & Non Toxic】Our epoxy art resin is non toxic, self leveling, self degassing, odorless, UV resistant, no VOCs, no solvents, non-flammable,....
  • ▶【Easy to Usage 】1:1 mix ration epoxy resin kit and all in one kit to make your ideal epoxy resin arts easily and fastly..
  • ▶【Quality Ensurance】Rigorous testings to ensure our epoxy resin as a perfect match for all glow in the dark and other resin craft pigments.....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Bu....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Bu....
Check Stock

Fluffy lunch box [SNOOPY friends]

  • Size: Width 18.6 x Length 10.8 x Height 6.2 cm.
  • Material: lid = AS resin body / stopper / partition = polypropylene, Gasket = silicone resin.
  • The SKATER Co., Ltd. is a Japanese company that plans and sells plastic home daily necessities and fancy goods. SKATER Co., Ltd. has been granted product commercialization licenses by character licensors such as Sanrio, Takara Tomy and Disney, and produces and distributes lunch boxes and water bottles for children..
Check Stock

Hello Kitty Baby Lunch Food Container Box Set of Two Br-9

  • Size: Width 16.9 x Length 10 x Height 9 cm.
  • Material: Lid = AS resin, main body · inner lid · stopper · partition = polypropylene, packing = silicon resin..
  • The SKATER Co., Ltd. is a Japanese company that plans and sells plastic home daily necessities and fancy goods. SKATER Co., Ltd. has been granted product commercialization licenses by character licensors such as Sanrio, Takara Tomy and Disney, and produces and distributes lunch boxes and water bottles for children..
Check Stock

Skater Pokemon Poké Ball Pokeball Lunch Box LMS3

  • Size: Lunch box = diameter 11 x 10.4 cm, bag = length 18.5 x width 19 cm.
  • Material: lid = AS resin, main body = ABS resin, container ? partition = polypropylene, bag = cotton 100%.
  • Set contents ? Accessory: lunch box + lunch belt + bag.
  • The SKATER Co., Ltd. is a Japanese company that plans and sells plastic home daily necessities and fancy goods. SKATER Co., Ltd. has been granted product commercialization licenses by character licensors such as Sanrio, Takara Tomy and Disney, and produces and distributes lunch boxes and water bottles for children..
Check Stock

Aquatic Life Reverse Osmosis 10” Replacement Filter Cartridges Kit (Carbon)

  • RO/RODI CARTRIDGES PACK – AquaticLife 10” reverse osmosis replacement cartridges pack includes (1) Carbon Block, (1) Sediment Cartridge, (1) 100 GPD TFC Membrane Filter, and (1) Color Changing Deionization Resin..
  • SEDIMENT CARTRIDGE – The 5 Micron Sediment Filter Cartridge captures and reduces unwanted particulate material such as sand, silt, and rust from water which affect the taste and appearance of your water..
  • CARBON BLOCK FILTER – The 5 Micron Activated Carbon Block Filter Cartridge removes 1 PPM chlorine for up to 2,500 gallons of water and conditions the water prior to the RO Membrane for up to six months..
  • TFC MEMBRANE FILTER – Thin Film Composite (TFC) Membrane for standard RO systems and the RO Buddie features polyamide membrane material with a rejection rate of up to 98%..
  • COLOR-CHANGING DEIONIZATION RESIN – Mixed-Bed DI Filter Cartridge contains positive Cations and negative Anions. DI Resin physically changes colors from Blue to Tan when the media is exhausted..
Check Stock

Panache Crochet Print Marisa Fold Waist Bikini Swim Bottom US Large UK 14 Blue

  • This is the Marisa Fold Waist Pant by Panache. This gorgeous brief co-ordinates with various tops from the same range. Excellent for those Lazy days....
Check Stock

SKB 6U iSeries Injection Molded Fly Rack-13 Mixer Accessory (3i-2317M146U)

  • SKB series Injection molded mil-standard waterproof cases are molded of Ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J/ IP67). limited Lifetime.
  • Standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvent, corrosion, and impact damage (MIL-STD-810F).
  • 6U removable Injection molded shock Rack cage, 13 inch rack depth, interior foam protection, Ultra high-strength polypropylene copolymer resin case construction, UV, solvent, corrosion and resistant (MIL-STD-810F).
  • Complete Gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J), automatic ambient pressure equalization value (MIL-STD-648C & IP67).
  • Molded-in hinges, TSA acceptable trigger release latch system, rubber over-molded cushion grip handles, locking loops to accommodate a customer supplied lock.
Check Stock

Direct drinking water bottle purawantatti Bottle 480ml Super Mario 17 PSB5SAN

  • Material: Body · lid · belt stopper = polypropylene, cap = AS resin, Gasket = silicon resin, spring · pin = stainless steel..
  • The SKATER Co., Ltd. is a Japanese company that plans and sells plastic home daily necessities and fancy goods. SKATER Co., Ltd. has been granted product commercialization licenses by character licensors such as Sanrio, Takara Tomy and Disney, and produces and distributes lunch boxes and water bottles for children..
Check Stock