Reviews Cnc Turret Center Machine

General Tools - FBA_840 840 Pro Doweling Kit

  • Revolving turret accommodates six drill bit sizes.
  • Just lift and turn turret to lock in guide hole.
  • Black oxide guide bars are graduated for fast positioning of hole center points.
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

TAC Vector Optics Snap Caps 223 Rem 556 Dummy Rounds Rifle Metal Snap Caps for 223 Remington

  • 5 years warranty. Etched Glass Very Fine Reticle Center Dot (0.12MOA).
  • The reticle is red illuminated along the second focal plane. The illunimation has 11 levels of brightness..
  • Zero-Stop Elevation & Turret Lock Windage. Turret lock feature: Pull to adjust, press to lock..
  • O-ring Sealed and Nitrogen Purged Ensure Water Resistance and Fog Proof performance.
  • Free 34mm mount rings, and lens covers, sunshade..
Check Stock

VM-KZ910 Fender Eliminator Kit fit for Kawasaki Z900 (2017-2019)

  • Pressed-in threaded inserts means no loose nuts need to be supplied for easy installation, clean underside appearance.
  • Cut and formed using state-of-the-art CNC turret punching and bending machines to maintain consistent high quality.
  • Includes all hardware and installation instructions.
Check Stock

T Tulead Machinist Square 100x70mm Carbon Steel Machinist Square Ruler 90 Degree Engineer Tool Woodworking Square

  • Includes 2 Squares: 4" / 90° and 7" / 90°.
  • Triangle Square - Joinery Layout - Machine Setup - Measure and Marking - Center Finder.
  • Triangle Square: CNC Stainless Steel Contruction - Precision Laser Engraving.
  • Base: CNC Solid Aluminum Construction - Blue Anodized Finish - Precision Laser Engraving.
Check Stock

Vortex Optics Razor HD LHT 3-15x50 Second Focal Plane Riflescope - G4i BDC Reticle (MRAD)

  • The Razor HD LHT 3-15x50 with it's ultra-lightweight design is made to turn every second of legal hunting light into opportunity. Stunning, High Definition optical system delivers a crystal-clear picture with tack-sharp resolution..
  • Ultimate anti-reflective coatings on all air-to-glass surfaces provide maximum light transmission for peak clarity and the pinnacle of low-light performance. Index-matched lenses correct color across the entire visual spectrum..
  • The RevStop Zero System offers an easy to set, rock-solid return to zero after turret adjustments. A locking elevation turret prevents accidental adjustments and provides fast, accurate adjustments. The capped windage turret allows easily read adjustments..
  • A variable intensity illuminated center dot is used to aid in low light performance. The locking eyepiece is designed to quickly and easily adjust the focus on your reticle..
  • O-ring sealed and argon purged, the Razor HD LHT brings waterproof and fogproof performance.
  • while the single-piece, aircraft-grade aluminum, 30mm tube gives users a shockproof platform. Armortek coatings protect the lenses..
Check Stock

VM-KN410 Fender Eliminator Kit fit for Kawasaki Ninja 400 (2018+) / Kawasaki Z400 (2019+)

  • Pressed-in threaded inserts means no loose nuts need to be supplied for easy installation, clean underside appearance.
  • Cut and formed using state-of-the-art CNC turret punching and bending machines to maintain consistent high quality.
  • Includes all hardware and installation instructions.
Check Stock

OSCARBIDE 1/2\Indexable Grooving Parting Holder QA08R-20 Heavy Duty Nickel Plated Right -Hand Lathe Cut Off Tool with Carbide Insert GTN-2, 1 Piece

  • Size：Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

Genmitsu 3018-PROVer V2 Upgraded Desktop CNC Router Machine with GRBL Offline Control, Limit Switches & Emergency-Stop, XYZ Effective Working Area 284 x 180 x 40mm (11.2 x 7.1 x 1.6 inches)

  • The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business..
  • Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card..
  • The redesigned Z Axis Carriage has fixed excess movement which came from the old design anti-backlash spring. Not only did this improve the engraving accuracy, but also increased the effective range of the Z Axis from 35mm to 40mm. All stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material..
Check Stock

OSCARBIDE 1/2\ Indexable Lathe Grooving Parting Holder with 10 Pieces GTN-2(QC1402) Heavy Duty Nickel Plated QA08R-20 Right -Hand Cut Off Tool Carbide Inserts

  • Size：Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

OSCARBIDE 3/8\x1/2\Indexable Grooving Parting Holder Nickel Plated Heavy Duty QA06R-20J Right -Hand Lathe Cut Off Tool with GTN-2 Carbide Insert, 1pcs

  • Size：Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock