Reviews Cnc Servo Controller 2

6 Channel Digital Servo Tester with Over-Current Protection

  • Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.
  • The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.
  • The voltage that the controller require should correspond to the voltage required by a servo that you controlled.
  • There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation.
  • then press it, remove the center of the state, the knob can continue to control the servo rotation.
Check Stock

CNC Servo Motor Drive Controller Kit 750W NEMA34 Industrial Control Kit 2.4NM 3000R/Min AC220V

  • Good quality 750W NEMA34 Servo Motor and Driver Controller Kit, DHL shipping.
  • CNC Industrial Control Kit 2.4NM 3000R/Min AC 220V, Impulse frequency 500KHZ.
  • The encoder feedback 2500p/r,15 line increment model, differential output.
  • Cooling way Air cooled (heat transfer film , the strong cold wind fan).
  • English User manual in PDF file, we offer professional technical support for products..
Check Stock

BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）

  • 【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Check Stock

9imod 45KG High Torque Servo,Waterproof Servo Motors,Metal Gear Coreless Servo,8.4V HV Digital Servo,Full Aluminum Case for RC Servo 1/10 1/8 Crawler Car

  • 1.Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments..
  • 2.High Torque and Voltage Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/[email protected],controllable angle range from 0 to 180 degrees..
  • 3.Full Metal Gear Coreless Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control..
  • 4.Widely Use Servo Motor:Compatible with 1/5,1/6,1/8,1/10,1/12 Scale Clawer Truck,TRX6,scx10,RC Car/Robot/Boat/Mechanical Arm/Quadcopter and other remote control models..
  • 5.Standard Dimension RC Servo: 1.57 x 0.78 x 1.91 inch(40 x 20 x 48.6 mm).
  • Weight:2.65oz (75g).with 25T Metal Servo Horn..
Check Stock

BETU 35KG Coreless High Torque Servo，Waterproof Servo Compatible with 1/6，1/8, 1/10, 1/12 Truck, RC Car, Metal Gear Servo with 25T Servo Horn（180°）

  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arm..
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock

BETU 35KG Coreless High Torque RC Servo，Waterproof Servo with Full Metal Gear, Steering Servo with 25T Servo Horn（270°）

  • 【Excellent Quality steering servo】Equipped with strong copper & stainless steel Gear, CNC aluminium middle shell, Less noise, light weight, Stable and water-proof..
  • Widely Use Rc Servo】The servo (Control Angle 270°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 270 degrees, Excellent linearity, Precision control..
  • 【35KG Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock

BETU 2Pack 25KG High Torque RC Servo，Waterproof servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car, Full Metal Gear Steering Servo with 25T Servo Horn（270°）

  • 2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell..
  • The steering servo's Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
  • Waterproof servo, Full metal gear, Less noise, light weight, Running degree 270°.
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

  • 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
  • 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
  • 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
  • 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
  • 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check Stock

ZHIPAIJI for FLYWING FW200 rc Helicopter Spare Part Servo Arm FW200 Parts FW219

  • Metal 25T Servo Arm Round Type is suitable for Hitec, Parallax, Futaba and other brands (40x20x36mm) standard servos..
  • Metal 25T Servo Arm Round Type Material is CNC Aluminium..
  • Metal 25T Servo Arm Round Type Mounting Hole Spacing is 14mm..
  • Metal 25T Servo Arm Round Type Servo disc diameter is approx 20mm..
  • Package of Metal 25T Servo Arm Round Type Includes: 5 x Servo Accessories Disc 20 x Screws.
Check Stock

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

BETU 45Kg Coreless Servo Motor HV 8.4V, High Torque RC Digital Servo，Full Waterproof Servo, Stainless Steel Gear Servo with 25T Servo Horn（180°）

  • 【Metal Gear Coreless Servo】Equipped with strong copper & Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight..
  • 【Waterproof Servo】Waterproof performance: IP67 (Please watch the waterproof test video). Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Widely Use Digital Servo】The steering servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Speed Servo Standard Size】1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
Check Stock

Apex RC Products 25T for Futaba Black Aluminum Dual Clamping Servo Horn - 2 Pack #8015

  • Futaba / Savox Aluminum Clamping Servo Horn.
  • 2 Mounting Positions - 20mm & 24mm (Measured From Hole Center To Hole Center).
Check Stock

Apex RC Products 25T for Futaba Red Aluminum Dual Clamping Servo Horn - 2 Pack #8016

  • Futaba / Savox Aluminum Clamping Servo Horn.
  • 2 Mounting Positions - 20mm & 24mm (Measured From Hole Center To Hole Center).
Check Stock