Reviews Cnc Router Bits

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

LAIWOO CNC Router Bits Set 1/4(6mm) Shank, Engraving Wood Carving Router Bit 6mm & 4mm, 60° & 90° V-Groove, 20° Profile bit, 15° Detail Carving Bit, Tungsten Steel - 4PCS

  • 【PREMIUM MATERIAL】 Our cnc router bits is made of high hardness and wear-resistant tungsten steel, which is not only sharper but also less prone to breakage compared with ordinary carbide cnc bits, which will improve your work efficiency and completion..
  • 【EFFICIENT CUTTING PERFORMANCE】 These precision mirror-finished cnc engraving bits with scientific chip groove design prevents wood chips from affecting your work. Also the cutting speed is fast and the cutting surface is flat & smooth..
  • 【INVIDUAL PACKAGE】 4pcs package, each one is individually packaged for easier storage. Package contains 1 x 15° detail carver, 1 x 20° profile bit, 60° and 90° V groove bits..
  • 【WIDE APPLICATION】 These router bits for cnc are suitable for MDF, PVC, acrylic, solid wood, plywood, organic board, etc. Widely used for cutting/carving/engraving/grooving/drilling/positioning/roughing/milling. More suitable for wood carving..
  • 【PERFECT SERVICE】 We value our customers' experience, if you have any questions, our customer service team will reply within 24 hours. In addition, you will enjoy 12 months warranty, any quality problem we will solve for you!.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

BINSTAK CNC Spoilboard Surfacing Router Bit 1/4 Shank Slab Flattening Router Bit with 1-3/8 Cutting Diameter 2+2 Flutes Insert Carbide Wood Planer Router Bits Planing Bit for Woodworking

  • Carbide Inserts: 12*12mm. 2+2 inserts design, resulting in a more balanced tool while running and get a smoother surface. The Router Bit comes with insert blades. For more blades, please purchase the K1222 model. ASIN：B0B1MJ9Z9P.
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

BOSCH PR001 Fixed Base for the BOSCH Colt PR20EVSK & PR20EVSNK Palm Routers , Blue

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock