Reviews Cnc Machine Center

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

T Tulead Machinist Square 100x70mm Carbon Steel Machinist Square Ruler 90 Degree Engineer Tool Woodworking Square

  • Includes 2 Squares: 4" / 90° and 7" / 90°.
  • Triangle Square - Joinery Layout - Machine Setup - Measure and Marking - Center Finder.
  • Triangle Square: CNC Stainless Steel Contruction - Precision Laser Engraving.
  • Base: CNC Solid Aluminum Construction - Blue Anodized Finish - Precision Laser Engraving.
Check Stock

Genmitsu 3018-PROVer V2 Upgraded Desktop CNC Router Machine with GRBL Offline Control, Limit Switches & Emergency-Stop, XYZ Effective Working Area 284 x 180 x 40mm (11.2 x 7.1 x 1.6 inches)

  • The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business..
  • Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card..
  • The redesigned Z Axis Carriage has fixed excess movement which came from the old design anti-backlash spring. Not only did this improve the engraving accuracy, but also increased the effective range of the Z Axis from 35mm to 40mm. All stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material..
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

Woodworking Ruler, 3Pcs Precision Pocket Ruler Metal Slide Rule Inch and Metric T-Type Scribing Ruler Square Ruler T Track Ruler Marking Measuring Ruler with Slide Stops(6/8/12 Inch)

  • Includes 2 Squares: 4" / 90° and 7" / 90°.
  • Triangle Square - Joinery Layout - Machine Setup - Measure and Marking - Center Finder.
  • Triangle Square: CNC Stainless Steel Contruction - Precision Laser Engraving.
  • Base: CNC Solid Aluminum Construction - Blue Anodized Finish - Precision Laser Engraving.
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
  • The extra spindle mount, laser module and other upgraded accessories are available for order. You could upgrade the machine easily based on your needs. If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions ....
Check Stock

Chum Power 1/64\-1/2\ Special Heavy Duty Keyless Drill Chuck, JT33 Mount, Titanium Jaws

  • All parts are ground, heat treated, surface treated and under specific QC condition..
  • Extrmely high accuracy and precision design, suitable for CNC mahines and machine center..
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock

FoxAlien Masuter 4040 3-axis CNC Router Machine + 300W Spindle Upgrade Kit

  • Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier..
  • Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for immediate shutdown of your machine..
  • CAD/CAM software to design then convert your ideas into instructions (GCode) that the router can understand and execute (common options are Carveco, Fusion360 and Easel). If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise..
Check Stock

Chum Power 1/64\-1/2\ Special Heavy Duty Keyless Drill Chuck with Integrated Shank, MT3 Shank, Titanium Jaws

  • All parts are ground, heat treated, surface treated and under specific QC condition..
  • Extrmely high accuracy and precision design, suitable for CNC mahines and machine center..
Check Stock

Micro 100 SFPM-050-10 Square End Mill - Upcut, 5 mm Cutter Dia, 16 mm LOC, 1 Fl, 5 mm Shank Dia, 50 mm OAL, Uncoated

  • END MILL CUTTER: Mill Cutter, usually used to be assembled on milling machine. Suitable for CNC data processing center, carved, high-speed machines..
  • WIDELY USE: Can milling of copper, aluminum, tool steel, cast iron, etc..
  • HIGH TOUGHNESS: High toughness, abrasion resistance, high-speed cutting for the high hardness..
  • EASY TO USE: Can processing directly or fine processing to the heat treatment mold..
  • SAVING TIME: Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time..
Check Stock

DOWAL X20 Golf Putters for Men Right Handed,100% Milling Face, Easy Aligned Steel Mens Putter with Headcover

  • PRECISION MILLED FACE - 100% CNC Milling Face for More Consistent Speed Control and Distance Performance..
  • Larger Center Putt - A unique Diamond CNC Milling Parttern at Center to Increase the Putt Control..
  • Easy Align and Accurate Putt by Duble Alignments on Putter Top!.
  • Waterproof Magnetic Putter Headcover For Free to Protect Your Golf Putter.
  • 360g Weighted SUS303 Putter Head with Stainless Steel Shaft and Soft Grip for You to Play The Best Putt..
Check Stock

DOWAL X20 Golf Putters for Men Right Handed,100% Milling Face, Easy Aligned Steel Mens Putter with Headcover

  • PRECISION MILLED FACE - 100% CNC Milling Face for More Consistent Speed Control and Distance Performance..
  • Larger Center Putt - A unique Diamond CNC Milling Parttern at Center to Increase the Putt Control..
  • Easy Align and Accurate Putt by Duble Alignments on Putter Top!.
  • Waterproof Magnetic Putter Headcover For Free to Protect Your Golf Putter..
  • 360g Weighted SUS303 Putter Head with Stainless Steel Shaft and Soft Grip for You to Play The Best Putt..
Check Stock