Reviews Cnc Cutting Table

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

MNA 1/4 Inch Shank CNC Spoilboard Surfacing Router Bit,4PCS Router Bit Set,4 Wings,1-37/64-Inch Cutting Diameter,1/4' 5/16' 3/8' 1/2' Milling Depth

  • MNA CNC spoilboard surfacing router bit is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut..
  • 4 WINGS WOOD CNC ROUTER BIT:1/4-Inch Shank Rabbet Slot Cutter Router Bit Set, Shank Size: 1/4", Cutting Diameter: 1-37/64", Cutting Depth: 1/4"-1/2" , Cutting Height: 1/4", 5/16", 3/8", 1/2".
  • 4 Different cutting height router bits can use as spoilboard surfacing router bits or rabbet slot grooving bits.
  • American industry classification C3 Carbide. Fit for all types of wood material, such as: MDF, hardwood, softwood, and particle board..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

Yakamoz 1/4 Inch Shank 3-Wing Adjustable Slot Cutter Router Bit Set with Bearings | 6-Picecs Slotting Cutting Blades 1/2 Inch Cutting Depth 6 Different Cutting Widths

  • Shank Size: 1/4", Cutting Depth:1/2", Cutting Diameter:1-7/8", Bearing Outer Diameter: 7/8".
  • 6 Different Replacement Slot Cutters: 1/16", 3/32", 1/8", 5/32", 3/16" and 1/4" [Cutting Width].
  • Industrial quality router bits with Anti-Kickback design and CNC balanced with high quality guide bearings..
  • Made of quality C3 micro-grain carbide, with heat resistant teflon coating to prevent building-up of sawdust, resin, and pitch..
  • Designed for a router table or desktop woodworking engraving machine like CNC hand-held and table-mounted router. Suitable for solid wood, particleboard, MDF, plywood etc. [Note: Please clamp the shank in right place [See Picture No.4], or it may cause the shank getting bend. And the holder of the blades cannot use as a 1/4 shank, it should not be used on router machines.].
Check Stock

BAYTORY CNC Spoilboard Surfacing Router Bits 1/4 inch Shank 1 inch Cutting Diameter Carbide Tipped Woodworking Planer Bottom Cleaning Tool Wood Milling Cutter Slab Flattening Surface Planing Bit

  • 3 Wings Wood CNC Surfacing Router Bits: Precise 3 Wings can cut your slab flattening project material quickly and cleanly. 1/4 Inch Shank, 1/4" Cutting height, 1" Cutting Diameter..
  • High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges with anti-kickback design. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • Great Design: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving..
  • Wide Range of Applications: Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • Applicable Equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. Wood engraving machines, trimming machines, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock

CNC Spoilboard Surfacing Router Bit 1/4 inch Shank Carbide Tipped Surface Planing Bottom Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter Planer Woodworking Tool

  • ★Precision Size: Precise 3 Wings can cut your project material quickly and cleanly.1/4 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/4" Cutting height, 1/4" Cutting depth,1"(25.4mm) Cutting Diameter..
  • ★High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • ★Wide Range of Applications: This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand).
  • ★Applicable equipment: Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • ★100% Satisfaction: We're so confident that you'll love Spoilboard Surfacing Router B....
Check Stock

SCULPFUN Laser Engraver Working Table,Laser Honeycomb Pad,Desktop Protection,11.81x7.87x2.17 in,for Laser Engraving Machine Cutter Tool Set

  • 【Cut through observable design】Laser Honeycomb Working Table contains a very convenient cutting and observing design. When the laser cuts through wood or acrylic, the metal backing plate at the bottom of the honeycomb panel will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether to cut through..
  • 【Necessary accessories for laser cutting]】Laser Honeycomb Working Table uses the laser cutting table to cut wood, acrylic and other materials. The edges of the wood are neat and clean, not easy to be yellowed by smoke, and a clean cutting work can be obtained..
  • 【Metal desktop protection board】Honeycomb Working Table is equipped with a metal desktop protection board, which can protect the table from laser damage. The Laser Protection Pad is very suitable for small DIY diode lasers..
  • 【High-quality workmanship with measuring ruler】The X-axis and Y-axis of the Laser Honeycomb Working Table contain precision scale lines to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraving. The Laser Protection Pad is made of metal and processed by high-precision CNC. The structure is firm, not easy to deform, and has....
Check Stock

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
  • ✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
  • ✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
  • ✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
  • ✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..
Check Stock

1\ Radius Roundover Router Bit 1/2\ Shank, Edge Forming Roundover Bit Bead Rounding Over Edging Bit by BINSTAK

  • INDUSTRIAL QUALITY ROUND OVER BEADING ROUTER BIT: Excellent for producing smooth, uniformly rounded edges. Great for edging, beading and/or molding applications. And can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing..
  • USE RANGE for ROUNDOVER ROUTER BIT: Suitable for hard woods, mdf, laminate, particle board, plywood compact panel and etc. Avoid cutting metal and non-wood materials..
  • HIGH QUALITY CNC ROUNDOVER OVER BIT: The sharp YG6X virgin carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This round over edge bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, it can withstand some heavy duty use and the test of time..
  • Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc..
Check Stock

Genmitsu 3040 MDF Spoilboard, work with 3040 Y-Axis Extension Kit, 3018 CNC Upgraded Accessories Compatible with Most 3018, 3018-PRO/ 3018-MX3, 30 x 36 x 1.5cm (11.8'' x 14.1'' x 0.6'')

  • Compatibility: Perfectly compatible with Genmitsu 3040 extension kit for 3018-PRO & 3018-MX3 series CNC router. Increase rigidity and expand your mounting options..
  • Great Stability: The flat and smooth surface can ensure the stability of the cutting material, easy to resurface..
  • Easy to Use: The spoilboard comes with pre-installed threaded holes. It’s easy to install and can be used with most bench clamping systems..
  • Material: MDF(Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 36 x 1.5cm (11.8'' x 14.1'' x 0.6'').
  • Application: Usually used when cutting or carving wooden materials. The spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting..
Check Stock

BOSCH PR001 Fixed Base for the BOSCH Colt PR20EVSK & PR20EVSNK Palm Routers , Blue

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

SCULPFUN Laser Cutting Honeycomb Working Table Board for CO2 or Diode Laser Engraver Cutting Machine, for Slight Burnt & Smooth Edge Cutting, Visible Cut-Through, Table-Protecting, 300x200mm

  • Necessary Accessories for Laser Cutting: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work..
  • Cutting Through Observable Design: We add 4 height increase pads for easy view. When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through..
  • High Quality Full-Metal Structure：SCULPFUN honeycomb table is made of metal, processed by high-precision CNC, it’s strong, stable, rust-proof, durable and high flatness..
  • Safe Metal Pad & Precise Scale Lines: Comes with a metal pad to protect the table from laser damage. A right angle measuring scale on the X and Y axes allows easy and quick measurement of the cutting object..
  • Wide Compatibility: Compatible with various laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine..
Check Stock

Wolfride 4pcs Core Box Router Bit 1/4 Inch Shank Round Nose Cove Box Router Bits

  • 1/4" Shank, 1/4" 5/16" 3/8" 1/2" Cutting Diameter, 4-Piece Set..
  • Body Material: 45# carbon steel, provide cleaning and sharp cutting..
  • Round nose router bits for cutting, beading, fluting and general ornamentation..
  • Cuts all composition materials, plywoods, hardwoods and softwoods..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers..
Check Stock