Reviews Clutch Spring Tool

Goplus Transmission Spring Compressor, Automatic Transmission Clutch Removing/ Installing Tool Kit, Strut Spring Compressor

  • ⚒️ Professional Tool: Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work..
  • ⚒️ Sturdy and Durable Construction: Made of A3 steel and galvanized metal legs, this compressor is sturdy and durable for long time use. And with coating rust-proof grease on the processed surface, the machine is free from rust. Due to this feature, it is easy for you to clean and maintenance..
  • ⚒️ Easy Operation: Just simply install the clutch spring compressor in position, and turn the knob to place pressure on the spring cage until it gives you enough room to release the snap ring during repairs or overhaul, which saves your time and energy..
  • ⚒️ Suitable for Many Cars: This tool kit can apply pressure to the clutch drum's retaining washer to compress piston return springs, which can be used on most American cars and light trucks such as Crown Victoria, Town Car, Ranger and Focus..
  • ⚒️ Lightweight to Easy-Carry: This clutch spring compressor only weighs 2.8lbs, so that you can carry it easily. And because of its compact frame, you can put it on your car in ca....
Check Stock

T-0151 Rear Clutch Spring Compressor Transmission Tool for GM 250, 250C, 350, 350C, 700R4, 4L60 & 4L60-E (Low & Reverse)

  • FITMENT: For GM 250, 250C, 350, 350C, 700R4, 4L60 & 4L60-E, this tool will remove the Low/ Reverse clutch piston in the rear of the case.
  • USING: The tool engages the lugs and pushes the piston return spring enough to access the snap ring, which makes removing the clutch spring retainer easy.
  • SUPERIOR QUALITY: Constructed from high quality Steel. It features its durable construction and wide applicability.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

Bonbo T-0158 Universal Clutch Drum Spring Compressor Transmission Tool Heavy Duty Steel

  • Wide Application – For use on universal transmissions and will fit most common clutch drums up to 6" in size. To check more applicable models, please refer to the description below..
  • Great Function – Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work. (Attention: Does not do rear case pistons).
  • Considerate Design – 6" long legs especially designed for deep drums. Similar to Atec Trans-Tool T-0158-HD. Mounts to work bench or table or on a bench vise..
  • Superior Quality – Made of premium and wear resistance steel, sturdy, impact resistance and anti-corrosion for much longer service time..
  • Satisfaction Guarantee – If you're not satisfied with the tool, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service. Put us to the test! Click on the "Add to Cart" button NOW and get this helpful product!.
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

Dual Clutch Transmission Remover Installer Tool Compatible with Ford Focus, DCT Dual Clutch Transmission Reinstall Reset Tool Set for Reuse DCT F1FZ-7B546-B, Clutch Transmission Tools Accessories

  • 【Dual Clutch Transmission Tool with Good Compatibility】The dual clutch transmission remover installer tool is made of heavy-duty steel, which is corrosion-resistant and high in hardness. Perfectly compatible with Ford Focus DCT dual-clutch transmission DPS6..
  • 【Professional Dual Clutch Transmission Tool】Reuse the removed/previously installed dual-clutch assembly. It resprings/re-trips the springs on the clutch so that the user can reinstall it..
  • 【Durable Dual Clutch Transmission Tool】The surface of the dual-clutch transmission remover installer tool is specially phosphated, which not only prevents rust, but also has a longer service life. With this tool, you will not need to purchase any new DCT clutch components..
  • 【How to Use the Dual Clutch Transmission Tool】Install the special tool and press the input shaft tightly. After the threaded bar is in contact with the input shaft, it rotates 20 times..
  • 【All-In-One DCT Tool Set】The dual-clutch transmission tool is equipped with a toolbox, which is very convenient for product organization and storage. If you have any q....
Check Stock

Powerbuilt Alltrade 648649 Kit 21 Clutch Pilot SAE/MM Tool Set Silver

  • Made to be the most reliable tools in the market today.
  • Tool set for aligning clutch components when installing a new clutch.
  • Aligns clutch plate and disc to pilot bearing.
  • Includes tapered cone clutch plate adapter and centering shaft.
  • Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch.
  • Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch.
Check Stock

DCT Dual Clutch Transmission Tools High Hardness&Wear-resistant Transmission Clutch Tool with Toolbox Compatible for F.ord F.ocus F.iesta V.olvo Clutch Removal Tool for Reinstall DPS6-DCT F1FZ-7B546-B

  • 【Dual Clutch Transmission Removal Tool&Reinstallation】This clutch transmission removal tool can be used to remove and install the dual clutch assembly. You can reuse the removed/previously installed dual clutch assembly without purchasing a new DCT clutch assembly. The clutch tool will resprings/re-trips the springs on the clutch so that you can reinstall a good used clutch assembly..
  • 【Compatible For F.ord & V.olvo Clutch Tool】Dual clutch transmission tools compatible for F.ord V.olvo DPS6 dry type dual clutch. Part Number: F1FZ-7B546-B. Compatible with F.iesta 2011-2019.
  • 【Made Of High Carbon Steel & High Hardness & Wear-resistant】The clutch tools are made of high carbon steel, which is of high hardness and wear resistance, providing you with long-term service..
  • 【Easy-carry & Well-organized Toolbox】Engine timing tool kit comes with a heavy-duty blow-molded plastic toolbox, which can be transported conveniently and quickly, and is safer to store and easier to organize..
Check Stock

Evolution Powersports EVO Worlds Best Bad Ass Drive Belt Can-Am Maverick X3

  • Fitment: for Polaris RZR XP 1000 2014-2021 all model..
  • Function:Replace your worn or damaged Polaris Primary clutch with a new stock unit.Come with weights and spring.
  • Upgrade: We’ve fine-tuned the clutch arm placement and angle to give you better engagement at any RPM. Plus, we include weighted clutch arms and a new primary clutch spring. Our spring rate, arm placement, and arm weight have been tested and tuned on our in-house dyno to give you maximum performance. This clutch reduces belt slippage and power loss, and it delivers more torque and power to the ground. That means you get better low and mid-range acceleration and throttle.
  • Note:Professional installation is highly recommended (No Instruction).
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

  • 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
  • Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.
Check Stock