Reviews Clutch Pressure

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

Goplus Transmission Spring Compressor, Automatic Transmission Clutch Removing/ Installing Tool Kit, Strut Spring Compressor

  • ⚒️ Professional Tool: Removing the snap ring on a transmission clutch may be tricky. The tool is designed to relieve the pressure off the snap ring by compressing the return spring, allowing easy removal and installation of the snap spring. It will be very helpful for your work..
  • ⚒️ Sturdy and Durable Construction: Made of A3 steel and galvanized metal legs, this compressor is sturdy and durable for long time use. And with coating rust-proof grease on the processed surface, the machine is free from rust. Due to this feature, it is easy for you to clean and maintenance..
  • ⚒️ Easy Operation: Just simply install the clutch spring compressor in position, and turn the knob to place pressure on the spring cage until it gives you enough room to release the snap ring during repairs or overhaul, which saves your time and energy..
  • ⚒️ Suitable for Many Cars: This tool kit can apply pressure to the clutch drum's retaining washer to compress piston return springs, which can be used on most American cars and light trucks such as Crown Victoria, Town Car, Ranger and Focus..
  • ⚒️ Lightweight to Easy-Carry: This clutch spring compressor only weighs 2.8lbs, so that you can carry it easily. And because of its compact frame, you can put it on your car in ca....
Check Stock

(4 Pack) 3/4" Wood Gluing Pipe Clamp Set Heavy Duty PRO Woodworking Cast Iron

  • Four plate clutch for high clamping pressure, quick release.
  • This clamp is limited only by the length of the pipe you supply.
Check Stock

Valeo Premium Clutch Kit 832226

  • Valeo Premium Clutch Kits are engineered using only the highest quality components and latest technology for exceptional operation and reliability.
  • Premium Friction Material for Increased Durability:  Valeo friction material is known as the best in the world, providing better heat dissipation and....
  • Consistent Comfort:  Enhanced damper technology for improved filtration of noise, vibration and harshness maintaining the comfort of the original....
  • This kit includes a clutch cover (pressure plate), clutch disc and release bearing.
Check Stock

Bower/BCA 202FF Brng

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

ClutchMaxPRO Heavy Duty OEM Clutch Kit with Flywheel with Slave Cylinder Compatible with 2013-2015 VW Beetle 2010-2015 Golf 2009-15 Jetta 2012-15 Passat TDI 2.0 Turbo Diesel (CP02157HDWSFW-CK)

  • INDUSTRY LEADING CUSTOMER SUPPORT: We offer industry's best technical support to ensure 100% satisfaction.
  • KIT INCLUDES: HD Nodular Solid Flywheel (replaces heavy and inconsistent factory dual mass flywheel), HD Premium Pressure Plate, HD Premium Sprung Hub Clutch Disc (9-7/16" (240 mm) x 15/16" (23.8 mm) x 23 spline), CSC Slave Cylinder Bearing Assembly, A set of 6 each flywheel mounting bolts, A set of 6 each pressure plate mounting bolts, Alignment Tool and Installation Guide *Note: Clutch and flywheel must be used together as a set without reusing existing components..
  • LIMITED WARRANTY: All ClutchMaxPRO products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!.
  • THE FOLLOWING PRODUCT IS COMPATIBLE WITH:​​​​​​ 2013 - 2015 VW Beetle TDI (2.0L DOHC 4cyl Turbo Diesel), 2010 - 2015 VW Golf TDI (2.0L DOHC 4cyl Turbo Diesel), 2009 - 2015 VW Jetta TDI (2.0L DOHC 4cyl Turbo Diesel), 2012 - 2015 VW Passat TDI (2.0L DOHC ....
Check Stock

Steel 26 Spline Clutch Alignment Tool

  • Widely Application: This correction tool is very suitable for use on most cars and is very practical..
  • The Scope of Work: The range of the calibration tool for automotive clutch vacancy is 14.4-2120.9-29mm..
  • Premium quality Material: Clutch Plate Alignment is made of material of plastic, not easy to damage the equipment, and avoid unnecessary losses..
  • Product Introduction: This tool can quickly complete the work of adjusting the clutch and pressure plate with one hand before assembly..
  • Pretest: This has been thoroughly quality tested before shipping to ensure product perfect. If you are not satisfied, we accept all of the return, replacement or refund requests..
Check Stock

Coast To Coast 619005 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Coast To Coast 619004 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines.
  • To ensure the highest level of quality every clutch design that Centerforce offers is run through a gauntlet of testing procedures We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements.
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs This coupled with precise measurement and strict manufacturing control means you get parts right - the first time.
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet but also exceed industry standards.
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD mutli-disc coupling system.
Check Stock

SCITOO CO 101510C AC Compressor Clutch Compatible for Ford for F-150 4.2L 4.6L 5.4L 1997-2006

  • ☃AC Compressor Clutch Fitment: 2004 for Ford for F-150 Heritage 4.2L, 1997-2006 for Ford for F-150 4.2L 4.6L 5.4L.
  • ☃Advantages: Compressors are the heart of the air conditioning system,so each SCITOO AC compressor clutch repair kit is subjected to a variety of....
  • ☃AC Compressor and AC Clutch Part Number: CO 101510C,4L3Z19703AB, F65Z19V703JA, YCC158, YCC220, 2010980AM, 4718120, 58151, 6511460, CO101510, 47867.....
  • ☃Important Reminder: Before installing the air conditioning compressor please clean the cooling system pipe of the your car, If sundries or metal....
  • ☃Warranty: All units are pressure tested with nitrogen for leaks to ensure product quality.
  • A/C compressor clutch coil assembly kit is backed by....
Check Stock

CPS FT800FN R410A Imperial Clutch-Type Ecentric Flaring Tool with Ratchet, Black

  • CPS FT800FN R410A Imperial Clutch-Type Ecentric Flaring Tool with Ratchet.
  • WHAT IT DOES: Engineered to create stronger flare joints for high pressure R-410A systems.
  • CLEAN FLARE WALLS: Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin spots or galling.
  • TORQUE: This tool provides an exact amount of flaring torque with break away clutch system.
  • INCLUDED: A rugged polyethylene storage case is included.
Check Stock

Centerforce 50058 Centerforce ® Accessories, Clutch Alignment Tool \90-97 Honda Accord 2.2L 5-Spd\

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock