Reviews Clutch For 38mm Tube

HONGK- Rear Brake Reservoir Cap Compatible with Kawasaki Ninja 250 300 Green 38mm [B078TBSS2K]

  • Universal Fit with 38mm Front / Rear Brake / Clutch 38mm Reservoir Cap.
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

Rockville Microphone Stand w/Hand Clutch+Tripod+360 Swivel Smartphone Mount

  • Package Includes: (1) RockvilIe RVMIC3 Tripod Microphone Stand With Quick Release Hand Clutch & Boom. (1) RockvilIe IPS55 Smartphone Mount w/360 Swivel For Boom Mic Microphone Stand. Features of RVMIC3: RockvilIe RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom. One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!).
  • This mic stand is the easiest and quickest to adjust on the market!. Leg joint is made out of aluminum (almost all other brands use plastic). The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube. This is about 50 % thicker than almost all other brands on the market, making this one of the sturdiest stands in the world. Steel & Nylon Construction.
  • Virtually Unbreakable (under normal use). Small Cable Guiding Clips for running cables along the stand. Black Color. Adjustable Height Range: 43-70 inches. Boom: 30 inches. Leg Diameter: 0.75 inch. Top Tube Diameter: 0.6 inches. Lower Tube Diameter: 0.6 inches. Boom tube size: 0.79 - 0.39 inch. Features:.
  • RockvilIe IPS55 Smartphone Mount - Attaches To any pole or stand with a diameter of 17mm 35mm. Dual knob adjustment for an extra secure fit. 360 degrees swivel rotation with tilt for portrait or landscape view....
Check Stock

Rockville RVMIC3 Tripod Microphone Stand with Quick Release Hand Clutch & Boom

  • Rockville RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom..
  • One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)..
  • This mic stand is the easiest and quickest to adjust on the market!.
  • Leg joint is made out of aluminum (almost all other brands use plastic)..
  • The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
  • This is about 50 % thicker than almost all other brands on the market, making this one of the sturdiest stands in the world..
  • Steel & Nylon Construction. Virtually Unbreakable (under normal use)..
  • Small Cable Guiding Clips for running cables along the stand. Black Color..
  • Adjustable Height Range: 43-70 inches. Boom: 30 inches. Leg Diameter: 0.75 inch..
  • Top Tube Diameter: 0.6 inches. Lower Tube Diameter: 0.6 inches. Boom tube size: 0.79 - 0.39 inch.
Check Stock

Rockville RVMIC4 Round-Base Microphone Stand With Quick Release Hand Clutch

  • Rockville RVMIC4 Professional Round-Base Microphone Stand With Quick Release Hand Clutch..
  • One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)..
  • Adjustable Height Range: 43-69 inches. Aluminum leg joints..
  • This mic stand is the easiest and quickest to adjust on the market!.
  • The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
  • This is about 50 % thicker than almost all other brands on the market making this one of the sturdiest stands in the world..
  • 100% steel construction and Aluminum joints! NO Plastic parts!.
  • Virtually Unbreakable (under normal use). Cable guiding clip on the stand for running cables..
  • Black Color. Top Tube Diameter: 0.75" inch. Lower Tube Diameter: 1" inches..
  • Round base with a diameter of 9.84" inches. This rock solid stand weighs in at 8.8 LBS!.
Check Stock

Clutch Brake Handle Levers for 22mm 7/8 inch Handlebar Fit for 110cc 125cc 140cc TTR SSR Xmotos Apollo 125 Pit Dirt Bike CRF50 CRF70 Motor Bike Motocross Parts by KAKO

  • This clutch brake lever with perch and throttle grips cable fits for 22mm 7/8 inch handlebar 110cc 125cc 140cc TTR125cc Rfz 125cc SSR 125 Xmotos....
  • The dirt bike clutch lever is made of the high class quality and very durable material, the folding brake clutch levers diameter: 7/8" or 22mm ..
  • The Throttle Grips Cable overall length 990mm/38.98inch, cable moving length:105mm/4.13inch. Fit For CRF KLX TTR 110 125 150 200 250 cc Dirt Pit Bike..
  • 125cc dirt bike clutch lever, rfz 125cc dirt bike clutch lever, ssr 125 clutch and brake lever, tao tao 125cc clutch lever, kawasaki dirt bike brake....
  • If you have any questions about the product, you can contact us and we will provide you with the best service and solution.
Check Stock

Rockville Pair RVES1 Adjustable Tripod DJ PA Speaker Stands +Carry Bag/Universal

  • Includes: (2) Tripod Speaker Stands. (1) Carry bag for the stands..
  • Pair Rockville RVES1 Adjustable Tripod DJ PA Speaker Stands With Carry Bag..
  • Adjustable Height. Steel Construction with Nylon Clutch and Base. Black Color..
  • Weight Capacity: 100 lbs. Adjustable Height Range: 71 inches..
  • Base spread: 0-32 inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches..
Check Stock

Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Overhead Microphones+(4) Stands

  • Package Includes:. (1) Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Condenser Overhead Microphones. (2) Rockville RVMIC3 Tripod Microphone Stand With Quick Release Hand Clutch & Boom. (2) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad.
  • Features of PRO-D7: Bass Drum Microphone:. Steel grill. Aluminum body. Zinc alloy hardware. Fits any mic stands. Anti-wind filter inside the grill. Element: Dynamic. Polar Pattern: Cardioid. Frequency response is engineered to be perfect for kick drums. Studio quality performance make these perfect for recording or live shows. Sounds great even at high SPL levels. Rejection of unwanted noises. XLR Output. Integrated flexible mounting hardware..
  • Features of RVMIC3: Rockville RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom. One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!). This mic stand is the easiest and quickest to adjust on the market!. Leg joint is made out of aluminum (almost all other brands use plastic). The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
Check Stock

Lisle 14440 Water Pump Wrench

  • More extensive design: 32mm&36mm clutch fan removal tool kit, compatible with a wider range of models than similar products, compatible with most models of BMW, Ford and Mercedes-Benz. And its price is more affordable and better quality. This is a two-piece multifunctional tool that you will like..
  • Application: 32mm&36mm wrench tool is compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and newer models, compatible with Ford..
  • Brand new upgrade tool: 32mm & 36mm Fan Clutch Nut Wrench tool is more practical than similar tools on the market. It has passed rigorous engine tests and is fully fitted, which can save you a lot of money.
  • Quality: This 2-piece fan clutch wrench set is made of high-strength steel, with precise dimensions, and has undergone many actual vehicle tests. The rubber handle covered in the middle helps prevent hand fatigue during prolonged use..
  • Service: ZKTOOL has the most perfect warranty service. We provide all the necessary information for each product. If you have any questions, please contact us. We will wait 24 hours..
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

Gator Frameworks ID Series Speaker Stand Set with Padded Nylon Carry Bag; Set of 2 Stands (GFW-ID-SPKRSET)

  • Includes: (2) Tripod Speaker Stands. (1) Carry bag for the stands..
  • Pair Rockville RVES1 Adjustable Tripod DJ PA Speaker Stands With Carry Bag..
  • Adjustable Height. Steel Construction with Nylon Clutch and Base. Black Color..
  • Weight Capacity: 100 lbs. Adjustable Height Range: 71 inches..
  • Base spread: 0-32 inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches..
Check Stock

DRIFT MANIAC 8 Speed Freewheel 11-32T Epoch Ebike

  • 8 speed freewheel 11-34, 11-13-15-18-21-24-28-34 Teeth.Compatible with hub motor e-bike, mountain bike, cargo bike, city bike, commuting bike.Thread hub offset >=Freewheel stack height(38.5mm)+1.5mm.
  • Large 34 teeth sprocket, create bigger gear range. Make climbing even easier..
  • Ebike specific freewheel 8 speed,Made of high strength SPHC and durable chromoly steel. Nickel plated surface treatment..
  • Total height: 38.5mm+/-0.2mm, Weight:601g+/-1g,hot rolled steel cogs(sprockets) + 3 layer nickel plated, steel clutch mechanism..
  • Designed for E-bike, ratchet mechanism is high strength and durable.Speed range 309%. Fits standard motorized rear hub with threaded freewheel mount, compatible also with standard threaded bicycle freewheel hub..
Check Stock

700x38c Bike Inner Tube/32c/40c/43c/700 x 35c Bike Tube 2 Pack with a 2 Bike Tube Levers a 2.1 x1.4 Self-Adhesive Patch Premium Bike Tube 700 BMX Bikes Tube Schrader Valve.

  • Sized for 700 x 38c bike tube/32c/40c/43c/700x35 tube tires 33mm Schrader Valve : Choose The Right Size For Your Bike! Get the tube designed ideally for you! This tube is designed for 700 x 38c bike tube/35c/40c/32c bmx tires..
  • What's In The Box:Take your next race head on, with 2 Pack bicycle tube 700 x 38c/35c/40c/32c.This tube comes with a large size Self-Adhesive Patch and 2 nylon plastic bike tire levers..
  • Upgraded 2.1"x1.4" Self-Adhesive Patch and Kit:These premium tubes come with a 2.1"x1.4" large size self-Adhesive patch that enables you to repair your 700 x 38c bike inner tube/35c/40c/32c in a lot of circumstances..
  • Made with butyl rubber: Made with outstanding butyl rubber, 700x40c bike tube32c/35c/43c/38c for bicycle tire stay inflated for longer to combat flats that ruin race. Plus, they’re individually boxed, so they won’t get damaged before you even used them!.
  • Easy to install: use our free  included 2 tire lever allows you to easily remove the inner tube from the tire when changing the tube, simple and efficient. .
Check Stock