Reviews Clevis Pin And R clip Kit

HiTow 3-in-1 ATV Towing Hitch Ball Mount Adapter with 2' Ball, Hollow Shank

  • Reinforced Tie Down/Tow Loop, Fits All Class III/IV 2 inch Square Receivers Hitch Tube.
  • 1/4 inches Rise, 5-1/2 inches Length (center of hitch pin hole to the ball center).
  • Includes Permanently Attached 2 inch Balls, 1/2 inch Clevis Pin and 5/8 inch Clevis Pin Hole, Use 5/8 inch Hitch Pin Kit or Lock.
  • Finished in Black Powder Coating Provide Durable Enhanced Rust and Corrosion Resistance.
  • Heavy Duty Steel via Robotically Welded for Superior Strength provide excellent mounting facility.
Check Stock

TOPTOW ATV / UTV Hitch Adapter 64209, Fits for 2 inch Receiver, 2 inch Ball, with 5/8 inch Pin

  • 3 in 1 MULTI FUNCTION: A draw bar with 1/2 inches dia. hook pin, for winch tow strap loops.
  • 2 inch hitch ball, GTW 2000lbs, for 2 inch couplers.
  • A 3/4 inch hole for clevis mount connecting..
  • RECEIVER SIZE: The ATV/UTV ball mount fits for 2 inch by 2 inch hitch receiver tube openning on ATV, UTV, lawn tractor, trailers etc..
  • ROBOT WELDING: Advanced robotically welded 2 inches ball, extremely durable.
  • HITCH PIN KIT INCLUDED: Comes with the 5/8 inch hitch pin & clip, quick to install and secure to assemble.
  • CORROSION RESISTANT: Enhanced black powder coated, better appreance, also increased corrosion resistance.
Check Stock

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

Swpeet 122Pcs 304 Stainless Steel M4 M6 M8 Clevis Pin with M1.5 M2 M3 Zinc Plated Steel Cotter Pin and Clips Fastener Set Hitch Pin Clips Fastener Fitting Hole Location Pin T-Shape Round Pin

  • ...nt Kit 】------ The cotter pin with hair pin style design gives fast and secure hold for bolts and pins, specialty locks to ensure tight hold that will last long, Heavy duty material allows for durability while hair pin style design gives fast and secure hold for bolts to ensure stability..
  • ☛ 3, 【 With M4 M6 M8 Clevis Pin Kit 】------ Unique design and Good quality, T shape, flat head, round structure and exquisite appearance. : Galvanized standardized firmware, rugged, durable, resistant to damage, corrosion resistance, high hardness, flexible positioning..
  • ☛ 4, 【 With Storeage Plastic Box 】 ----- The 122Pcs Pcs 304 stainless steel Clevis Pin Assortment Kit in various sizes and comes in a compartmented plastic case for storage and organization. Each pin has a chamfered end for insertion. The pins are made from l 304 stainless steel for toughness..
  • ☛ 5, 【 The Best faster Choice 】 ------ The pin is a class of standardized fasteners,it is can be static connected, but also to do relative movement with the connector, it mainly applied for the hinge of two parts, and then constitute a hinge connection. Pin usually lock by open pin, safe and reliable, not easy to break off, it's your effective small assistant, you can flexibly rotate the acc....
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

5/16\ G70 Clevis Slip Hook with Safety Latch, 4 Pack Heavy Duty Slip Hook for Trailer Truck Transport Tow Chain Hook

  • HEAVY DUTY CLEVIS SLIP HOOK - 5/16 inch G70 Clevis Slip Hook is Designed for Making Quick Connections with Chain in Industrial and Construction Applications, Exclusive Design and Spring-loaded Safety Latch Help Ensure Secure Attachment..
  • SAFETY LATCH FOR QIUCK RELEASE - Hook Pin and Cotter Pin Provide an Easy, Secure Attachment to Safety Chain ,This Clevis Slip Hook is Equipped with a Spring-loaded Latch for Secure Attachment and Quick Release as Needed, 5/16" Diameter Pin..
  • EFFICIENT PERFORMANCE SLIP HOOK - When Attaching Safety Chains, the Chains Should be Cross Underneath the Trailer Coupler, and Each Hook and Chain must be Rated to Meet or Exceed the Gross Weight of the Trailer..
  • 4PCS 5/16" G70 CLEVIS SLIP HOOK - This 5/16 inch clevis slip hook with safety latch widely used in trailers, flatbed trailers, truck, crane, tractor, transport tow Winch hook trailer, etc..
  • MEETING YOUR REQUIREMENT - To promotes long-lasting use and dependable strength for miles to come, this clevis hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements..
Check Stock

CURT 45821 Clevis Pin Hitch Ball Mount, Fits 2-Inch Receiver, 6,000 lbs, 1-Inch Hole

  • HIGHLY VERSATILE. This clevis pin trailer hitch ball mount equips your vehicle with two towing options: a strong clevis pin for straight-line towing applications, or the clevis pin can be removed and a trailer ball bolted on for towing a trailer.
  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and rated to tow up to 6,000 pounds gross trailer weight and 600 pounds tongue weight (limited to lowest-rated towing component).
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this clevis pin hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

Glarks 44Pcs 12 Sizes 304 Stainless Steel Flat Head Single Hole Clevis Pins Assortment Kit

  • ✿ [Package Detail]: The Kit includes 12 sizes clevis pins, M3x10, M3x12, M3x16, M3x20, each for 5pcs, M4x12, M4x16, M4x20, M4x25, M5x12, M5x16, M5x20, M5x25, each for 3pcs, total 45pcs. A nice assortment of sizes that helped you match and find all the pin you would need, and different sizes of products are placed separately to avoid confusion..
  • ✿ [Stainless steel material]: The clevis pins are made by 304 stainless steel, This material have high strength, it can guarantee no deformation even under great pressure. And, the clevis are galvanized, this makes them resistant to oxidation and corrosion..
  • ✿ [Exquisite workmanship]: Our clevis pins are produced according to the standard, with precise dimensions, and can perfectly fit the corresponding cotter pins. Therefore, it can not only exert a firm fixing function, but also can be easily installed and disassembled effortlessly..
  • ✿ [Satisfactory Appearance]: Stainless steel castings, silver-white luster, smooth and burr-free. After several years of use, it remains as bright as new, with both quality and beauty..
  • ✿ [Widely used]: Our products can be used in industry, machinery manufacturing, household DIY and furniture installation. But it should be noted that clevis pins must be used with cotter pi....
Check Stock

Vertex 53010005400 Piston Ring

  • Specs: Description: Cast Race Piston Kit, Compression Ratio: STD, Cylinder Bore: 54.000, Piston Diam: 53.940, Displacement: 125.00, Notes: Replica Piston kit.
  • Replaces OEM Numbers: HONDA: 13121-KZ4-702, KAWASAKI: 13003-1318, SUZUKI: 12141-36E01, YAMAHA: 4JY-11611-00-00.
  • Fits: Honda CR 125 R 1990-1991, CR 125 R 1992-1999, CR 125 R 2000-2003, CR 125 R 2004, CR 125 R 2004-2007, CR 125 R 2005-2007, Husqvarna CR 125 1997-2013, SM 125 2T Supermotard 1997-2013, SM 125 S 2003-2010, WR 125 1997-2013, Kawasaki KX 125 1992-1993, KX 125 1994, KX 125 1995-2000, KX 125 2001-2002, KX 125 2003-2008, Suzuki RM 125 1990-1999, RM 125 2000-2003, RM 125 2004-2007, Yamaha YZ 125 1994-1996, YZ 125 1997, YZ 125 1998-2001, YZ 125 2002-2004, YZ 125 2005-2020, YZ 125 X 2020.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
  • 100% New aftermarket Cast Race Piston Kit built to meet OEM specifications for Honda, Husqvarna, Kawasaki, Suzuki, Yamaha.
Check Stock

OTC 5054 Air Brake Service Kit for Class 7 and Class 8 Vehicles

  • OTC's Air Brake Service Kit contains the tools needed to remove the slack adjusters and push-rod clevis pins used in the S-cam brake systems of Class 7 & 8 vehicles.
  • Set works on manual or automatic slack adjusters.
  • Included tools: No. 5055 and 5056 Slack Adjuster Pullers, and No. 5057 Brake Clevis Pin Press.
  • Sturdy blow molded storage case keeps contents protected and secure when not in use.
  • Crafted from high-grade materials to ensure quality performance over the lifetime of the tools.
Check Stock

4Pcs 5/16'' Clevis Hook with Latch,Safety Hook G70 Tow Chain Clevis Grab Hook for Trailer Truck Transport Tow Chain Hook

  • HEAVY-DUTY CLEVIS SLIP HOOK: 5/16 inch Grade 70 Clevis Hooks make your job easier and give you peace of mind when you know your cargo, load is secured by Grade 70 clevis hooks with the higher working load limit than lower grade hooks..
  • EASY TO USE - The shallow throat opening allows for easy and secure connections with 5/16 inch Grade 70 chain. The cotter pin can be easily removed when needed..
  • QUICK RELEASE-This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin..
  • SOLID MATERIAL-Forged with high-strength, low-alloy carbon steel and precision heat treatment, and coated with a yellow zinc chromate finish for quick identification..
  • APPLICATION-These grade 70 5/16 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc.It meets requirements for high-test, transport and alloy chain..
Check Stock

GARAGE DOOR STUFF - Garage Door Opener Bracket Kit

  • This is the part that mounts to the garage door and then the opener arm is connected to this bracket.
  • Kit Includes: Door bracket, clevis pin, hair pin & fasteners included.
  • This is mfg. by GARAGE DOOR STUFF but will work with all brands.
Check Stock

JEGS Adjustable Throttle Cable | Universal Design | 24 Inches Long | Stainless Steel Outer Jacket | Aluminum Fittings & Ferrules | Perma-Crimp Clevis | Includes Clevis Pin With E-Clip

  • COMPATIBLE WITH JEGS brand and Lokar brand cable brackets.
  • 24 INCHES IN LENGTH to fit most applications.
  • STAINLESS STEEL OUTER JACKET for great looks and long life.
  • FEATURES aluminum fittings & ferrules, perma-crimp clevis, and clevis pin with e-clip.
  • OPTIONAL LONGER CABLE, linkage bushings, and swivels available separately.
Check Stock